• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.4
• /
• pp.30-37
• /
• 2002

This paper reports on the results of weathering test, tracking test and salt-fog test of various kinds of cycloaliphatic epoxy systems. UV irradiation dramatically induced the loss of surface hydrophobicity due to the chain scission attack at the surface under UV irradiation. It could be seen that samples containing an UV absorbent/antioxidant and a silicone oil additive have a good performance in weathering test, while ATH(alumina tri-hydrate) filled ones have high resistance against tracking failure than others. Under salt fog chamber test, specimens mixed with silicone oil are able to suppress leakage current development. It was thought that silicone oil mixed into cycloaliphatic epoxy system could lead to lower the surface energy and to retain hydrophobic properties for a long time, which are desirable for outdoor use.

• Journal of Conservation Science
• /
• v.26 no.4
• /
• pp.385-395
• /
• 2010

This study aimed to identify weathering factors and to assess the conservation environment through microclimatic analysis of Hyeonpung Seokbinggo (ice-storing stone warehouse). The stone blocks inside Seokbinggo suffered crack, displacement, break-out, exfoliation, efflorescence, brown and black discoloration, and biological colonization. Biological colonization represented the maximum deterioration rate(24%) among those weathering forms. The indoor microclimate showed parallel patterns with outdoor one, but the indoor temperature and relative humidity ranged far narrower than outdoor and remained steady. The environmental characteristics resulted from blocking-out of outdoor heat by the closed entrance and surrounding microtopography. This prevented water condensation and freezing effects, so that it reduced physical deterioration of rock, and maximized ice-storing effect for long time. However, contrary to positive effect, extremely high relative humidity over 99% accelerated biological colonization inside the Seokbinggo.

• Journal of Korean Society of Steel Construction
• /
• v.16 no.4 s.71
• /
• pp.415-423
• /
• 2004

To investigate the long-term corrosion resistance of an uncoated weathering steel, an important outdoor constructional steel material, skyward surfaces of the weathering steel and a control steel initially exposed to rural and industrial atmospheres for 9 years were electrochemically tested in neutral artificial rain in terms of electrochemical potentials, impedances, and anodic potentiodynamic polarization curves. Their results were then discussed. A quite passive and stable rust layer to the artificial rain was well formed on the skyward surface of the weathering steel exposed to the industrial and rural atmospheres, and its corrosion rate in the artificial rain was measured to be about a low $3{{\mu}m}/y$. Continuous immersion of all the weathered surfaces in the artificial rain revealed the gradual degradation of the weathered corrosion layers on the steel, resulting in a cathodically controlled corrosion of the substrate steel by the electrochemical measurements. Alloy components of the weathering steel were found to retard the degradation of the weathered corrosion layers on the steel in the artificial rain. For better corrosion evaluation of the weathering steel, more electrochemical measurements of surfaces that have been exposed for more than 9 years to more closely simulated atmospheric waters are needed. These measurements are almost non-destructive and can provide online and in situ information on the corrosion rate, the development of corrosion and the conditions of rust layers on any interested surface and at any exposure time of the steel, so they can be effectively applicable to the corrosion evaluation of steel structures such as bridges, towers, and architectures by forming an electrochemical cell on an interested structural surface and by using a portable electrochemical instrument.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.785-808
• /
• 2016

The objective of this study was to investigate the effect of the short-term weathering on the flame retardant performance of wood coated with Dancheong. Flame retardants were applied on the Dancheong coated Korean red pine. Flame retardants applied panels were layed at the two conditions of outdoor exposure and artificial aging to assess the reliability of artificial aging. Flame retardants used were commercial products developed for historical wooden buildings. Scanning electron micrographs revealed the forming of carbonized membrane by melting of flame retardant on wood surface. These carbonized membranes may help delay the further combustion of wood. Flame retardant performance was assessed by measuring heat release rate (HRR) and total heat release (THR) by cone calorimetry. There was no difference in flame retardant performance between before and after 6-month outdoor exposure tests. And also no difference in flame retardant performance between before and after 2-week artificial aging which corresponds to 6-month outdoor exposure. Both tests showed the similar results of combustion characteristics.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.2
• /
• pp.265-273
• /
• 2015

In general, when wood products are used outdoors for a certain period of time the surface color of wood changes due to light, water, heat and so on. This color change can be considered importantly for the product's market value. In this study, the color change of ACQ (Alkaline Copper Quaternary) and CBHDO (CuO $H_3BO_3$ N-cyclohexyldiazenium-anion) treated wood and untreated wood was investigated during 2-year weathering test. From this experimental study, it was found that the colors of the treated wood changed more reddish and yellowish from green. Meanwhile, the untreated wood turned to grey color rapidly. Also, the color of the treated wood in short-term exposure changed closer to the inherent color of the fresh natural wood than that of the untreated woods.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.2
• /
• pp.97-108
• /
• 2016

Thermally sprayed metals or organic coatings is often used in corrosion protection of steel structures. Duplex coating systems of thermally sprayed metal in combination with organic coating are selected as a new generic type of coatings on steel structures under the highly corrosive environments. In this study, three types of corrosion tests were carried out on four types of thermal sprayed specimens with sealing: zinc, zinc-15%aluminum alloy, aluminum and aluminum-5%magnesium alloy, four types of duplex coated specimens; thermally sprayed metals in combination with paint of acrylic urethane, and painted specimens. NORSOK M-501, Wet/dry cyclic seawater tests and outdoor exposure tests of nine types of specimens were conducted. From the corrosion test results, weathering performance of them were presented.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.35-41
• /
• 2017

Materials exposed to outside will deteriorate due to various weathering factors such as sunlight, heat, temperature, humidity and so on. Therefore, predicting speed of degradation and life time is a very important issue. This research uses retro-reflective sheets with white and green which are most commonly used colors to conduct the outdoor exposure test and acceleration test of xenon arc in Arizona state in the United States, Chennai in India, Sanary in France and Seosan in Korea to measure the reflective performance of retro-reflection. The accelerated factor was obtained by using regression analysis through reflective values obtained from the acceleration test of xenon arc from Seosan area. Also, by using solar uv program, the accelerated factor of various climate regions were obtained and it was confirmed that the accelerated factor of Senary was 1.04, Arizona 1.82, Chennai 1.92 times higher than that of Seosan.

• Journal of Information Technology Services
• /
• v.13 no.2
• /
• pp.251-259
• /
• 2014

Outdoor cultural properties have been damaged by natural weathering and air pollution for a long time. For this reason, there are many characteristics it is hard to decipher some carved inscription on the surface of damaged outdoor cultural properties. Until now, Rubbed copy has been widely used to decode engraved inscription. A investigation for epigraph has been made by the rubbing that has resulted in a lower resolution from the viewpoints of extraction process and used materials. Rubbing's results are not satisfied in the damaged inscriptions which are weathered by natural environment and pollution for a long time and in the narrowed one. The main analysis presented in this paper is a cross section analysis method using 3d scanning technique for epigraph not read. Cross section analysis is a study on readability improvement method for ancient inscription of irregularity monument surface. Cross section analysis confirms information that separated the inscription information of monument and the ground information to read a ancient inscription and decode the inscription information. The proposed character identification method contributed to decoding an ancient inscription on Silla Monument in Jungseong-ri of Pohang.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.279-287
• /
• 2018

Sealants are an important element of modern architecture and serve as a building protection against weathering by providing barriers against ingress of moisture, air, and other materials. Exposure to a variety of environments often reduces lifespan due to changes in physical, chemical and mechanical characteristics, and UV, humidity, and temperature expansion are important issues that are directly related to durability. In this study, a combined deterioration test chamber was developed to simulate the environment of the open air as an instrument for verifying the durability of structural sealing materials indoors. In order to replicate special weather conditions, such as yellow dust, acid rain, and contamination by microorganisms, it was deemed impossible to replicate the outdoor environment by 100 %, and the results of the results of the results of the external exposure test of the structural sealant and the combined deterioration testing device. As a result of the displacement test of the outdoor exposure test, it was determined that the sealant was breaking apart and that it would be smooth, and the displacement would be up to three times greater than the initial material value of 1 year. The displacement test results of the combined deterioration test device show the tendency to deteriorate, decreasing the elasticity and tensile characteristics. In the case of denatured silicon, the current 400 cycles have been completed to confirm 12 months of degradation of the external exposure. The deformation of the test specimen cannot be verified with the naked eye, so it is considered that the conditions of the specimen are more stable than the silicon sealant. As a result of the outdoor exposure test, if the combined deterioration test device is structured and proposed in the relevant guidance or specification, the anticipated lifespan of 12 months in the actual use environment can be verified indoors and below 3 months later, economically.

• Conservation Science in Museum
• /
• v.9
• /
• pp.59-66
• /
• 2008

At platform-reinforcing side stone plate having been exhibited in outdoor exhibition space of Gyeongju National Museum, split and exfoliation were proceeding due to weathering at joined·restored parts. Accordingly we checked imbibitional minerals in the stone through observation and analysis with polarized microscope, and studied capillary water absorption rate using Schmidt Hammer rebound hardness measurement and Karsten Tube.