• 산업기술연구
• /
• 제24권A호
• /
• pp.17-22
• /
• 2004

In the study, we have developed a straightening system for 304 micro wires that are normally used in the medical and semi-conductor fields. To apply heat to the micro wires, we introduced the direct wire heating method which generates the thermal energy by the electrical resistance of the wire itself. To avoid the deterioration of the wire surface by the environment, such as the oxidation or the hydration, the $N_2$ gas was filled in the glass pipe in which the straightening process was being performed. A precision tension meter was also attached to control the tension of the wire during the heating and straightening process. In order to control the straightening process, several experimental investigations with varying the tension, the feeding velocity and the temperature (current) was carried out. As a result of experiments, we obtained the optimal processing conditions satisfying the straightness requirement of the micro wires.

• 한국환경과학회지
• /
• 제26권2호
• /
• pp.231-238
• /
• 2017

Rapid industrial development has led to a serious problem of pollution in the industrial sector. With the increasing social need for environmental protection, research on air pollution prevention equipment for reducing pollutants in industrial processes is actively being undertaken. The deterioration of existent, installed facilities, their increased emission rates, and the strengthening of the effluent quality standards make complying with permissible emission standards difficult. In fact, installing new electric precipitators or complementing existent facilities is inevitable. The expansion and complementation of the installed electrical precipitators have led to improvements in dust collection efficiency, shorter working times, and lower costs. Because of its easy installation and simple manufacturing process, the production method with the discharge electrode of an electric precipitator is widely used. The following conclusions were reached by classifying discharge electrodes into four types based on the production method and mutually comparing them by their dust collection efficiency. None of the four types used in this study were damaged by impact. However, we were able to confirm some strain from the compression sites of both type A and type B. Both type B and type C are expected to have greater dust collection efficiencies than the other models due to their large vibration transmissibility. Moreover, the high vibrational energy is expected to cause rapping damage during its operation. Particularly, in the case of type B, some of the strain was found at the end of the compression site. The coupling schemes of both type C and type D are out of vibration transmissibility. On the other hand, the ability to maintain straightness and solidity of the side is regarded as outstanding and stable. Type D has outstanding on-site workability, considering the presence of locking, structural stability, and work conditions. From these experiments, we determined that type C is the most ideal connection method of discharge electrode, considering its construction period of renovation. Type C is inferior to type D with regard to on-site workability. However, type C has outstanding dedusting transmission with regard to the straightness, solidity maintenance, and vibration of shearing stress.

• Steel and Composite Structures
• /
• 제4권6호
• /
• pp.471-487
• /
• 2004

Modular steel scaffolds are commonly used as supporting scaffolds in building construction, and traditionally, the load carrying capacities of these scaffolds are obtained from limited full-scale tests with little rational design. Structural failure of these scaffolds occurs from time to time due to inadequate design, poor installation and over-loads on sites. In general, multi-storey modular steel scaffolds are very slender structures which exhibit significant non-linear behaviour. Hence, secondary moments due to both $P-{\delta}$ and $P-{\Delta}$ effects should be properly accounted for in the non-linear analyses. Moreover, while the structural behaviour of these scaffolds is known to be very sensitive to the types and the magnitudes of restraints provided from attached members and supports, yet it is always difficult to quantify these restraints in either test or practical conditions. The problem is further complicated due to the presence of initial geometrical imperfections in the scaffolds, including both member out-of-straightness and storey out-of-plumbness, and hence, initial geometrical imperfections should be carefully incorporated. This paper presents an extensive numerical study on three different approaches in analyzing and designing multi-storey modular steel scaffolds, namely, a) Eigenmode Imperfection Approach, b) Notional Load Approach, and c) Critical Load Approach. It should be noted that the three approaches adopt different ways to allow for the non-linear behaviour of the scaffolds in the presence of initial geometrical imperfections. Moreover, their suitability and accuracy in predicting the structural behaviour of modular steel scaffolds are discussed and compared thoroughly. The study aims to develop a simplified and yet reliable design approach for safe prediction on the load carrying capacities of multi-storey modular steel scaffolds, so that engineers can ensure safe and effective use of these scaffolds in building construction.

• 한국정밀공학회지
• /
• 제26권2호
• /
• pp.109-117
• /
• 2009

This paper presents a linear air bearing stage with compensated motion errors by active control of preloads generated by magnetic actuators with combination of permanent and electromagnets. A 1-axis linear stage motorized with a linear motor with 240mm of travel range is built for verifying this design concept and tested its performances. The three motions of the table are controlled with four magnetic actuators driven by current amplifiers and a DSP based digital controller. Three motion errors were measured combined method with laser interferometer and two-probe method with $0.085{\mu}m$ of repeatability for straightness error. The measured motion errors were modeled as functions of the stage position, and compensation were carried out with feedforward control because the characteristics of the motion control with magnetic actuators are linear and independent for each degree-of-freedoms. As the results, the errors were reduced from $1.09{\mu}m$ to $0.11{\mu}m$ for the vertical motion, from 9.42 sec to 0.18 sec for the pitch motion and from 2.42 sec to 0.18 sec for roll motion.

• 대한환경공학회지
• /
• 제39권8호
• /
• pp.456-461
• /
• 2017

본 연구에서는 전기방사를 통해 제조되는 dope solution의 원료인 다양한 Polymer [PAN (Polyacrylonitrile), PU (Polyuretane), PSU (Polysulfone)]와 용매[NMP (N-methyl-2 pyrrolidone), DMF (Dimethylformamide)]를 이용하여 다양한 물성의 나노섬유 물질을 구현하고, 이의 flux 특성과 SS (Suspended Solids) 분리 성능을 평가하여 제조된 섬유의 수처리 분리막으로서의 적용성을 확인하였다. 또한 SEM 분석을 통해 제조된 소재의 표면 분석을 수행하여, 섬유의 직경, 균일성 및 직진성 확인을 통해 flux, SS 분리 성능의 원인을 확인하였다. 추후 나노섬유 수처리 분리막 제조공정에서의 첨가제 투입을 통해 막 파울링, 기계적 강도 등의 문제를 해결할 수 있을 것으로 예상되며, 촉매 기능이 첨가된 수처리용 분리막 제조를 위한 기초 인자로써 활용될 수 있을 것으로 기대된다.

• 한국가축번식학회지
• /
• 제26권2호
• /
• pp.119-124
• /
• 2002

본 연구는 돼지에서 동결정액을 이용한 번식능력을 개선하기 위한 동결정액 포장재료의 효과를 구명하기 위하여 실시하였다. 본 시험에는 축산기술연구소 종축개량부 (충남, 성환)의 인공수정센터에서 사육중인 종모돈이 사용되었다. 기존의 돼지 동결정액 포장방법인 maxi-straw 동결정액 포장방법과 5$m\ell$빈 cryogenic-vial 및 aluminum-pack 포장방법을 비교한 결과 cryogenic-vial로 포장하여 액체질소 상단 15cm에서 동결한 후 52$^{\circ}C$ water bath에서 190초 융해한 방법이 기존의 maxi-straw 방법과 비슷한 결과를 나타내었다. Cyogenic-vial 포장방법의 동결-응해 방법을 설정하기 위하여 융해시간을 달리하여 시험한 결과 액체질소 상단 15cm에서 동결하고 52$^{\circ}C$에서 190초 간 융해하였을 때 정자운동성이 120초 및 150초 응해시 보다 우수하였다 (P<0.05). 그러나 정상첨체비율은 응해시간 간에 차이가 없었다. 52$^{\circ}C$에서 45초간 응해 한 maxi-straw 포장방법과 52$^{\circ}C$에서 190초 융해한 cryogenic-vial 포장방법간에 정액성상을 비교한 결과 총정자운동성과 정자의 빠르기는 maxi-straw가 우수하였다 (P<0.05). 그러나 직진성과 정상첨체비율은 두 포장방법간에 차이가 없었다. 동결정액 포장방법별 인공수정시 번식성적은 maxi-straw 동결정액이 cryogenic-vial 동결정 액보다 수태율, 분만율, 그리고 산자수가 높았으나 통계적 유의차는 인정되지 않았다. 이상의 결과를 종합해 보면 cryogenic-vial 포장 방법의 동결 및 음해방법을 좀 더 연구개발하면 기존의 maxi-straw포장방법을 대체하여 실용화 할 수 있을 것으로 사료된다.

• 한국자원식물학회지
• /
• 제36권1호
• /
• pp.91-99
• /
• 2023

기후변화 대응 바이오매스 생산이 우수한 활엽수 경제 조림수종 개발에 대한 수요가 증가하고 있다. 아까시나무는 탄소흡수능이 우수한 속성수로서 국내 적응성이 뛰어나고 경제적, 환경적 기능이 우수하다. 본 연구는 비교선발법을 이용하여 용재수로서 가치가 높은 아까시나무 우량개체 64본을 선발하였다. 경기, 강원, 충청, 경상 등 4개 지역으로 나누어서 생장특성을 비교한 결과 선발목들은 비교목들에 비해 수고, 흉고직경, 지하고, 통직성에서 유의적으로 우수한 형질을 보였다. 특히 충청지역의 선발목들이 가장 우수한 생장특성을 나타냈으며, 임분별로는 고성, 천안, 안동 집단이 우량집단으로 나타났다. 생장에 영향을 주는 요인 중에서 토양 성분은 상관관계가 없었으며, 대단위 산림 조림 지역 혹은 호수와 저수지가 인접한 지역의 선발목이 수고 생장이 우수한 것으로 나타났다.