• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.1
• /
• pp.96-109
• /
• 1996

The airbag system is known to be extremely efficient for the protection in an automobile crash. The performance of the airbag system is evaluated by real tests. However, the test is very difficult and expensive. Therefore, the computational simulations are carried out with low cost. The airbag analysis is included in the anlysis of the full-car crashworthiness. The behavior of the airbag can be predicted by a thermodynamic analysis. The contact force between the occupant and the airbag is calculated from the contact volume and the pressure in the airbag. The injury rate is evaluated from the contact force and the acceleration of dummies. So far, the contact is defined after the airgag is fully inflated. In many cases, the occupant is seated in the out-of-position and the contact can happen during the inflation process. A new algorithm has been developed for the out-of-position. To describe the inflation process precisely, the airbag is defined by a sphere and a torus. The injury is evaluated for the contact happened at any time. The developed algorithm is coded and interfaced with an existing software in the public domain. The full-car modeling is adopted from the previous study which is tuned for the regular position and real tests. Numerical experimentation have been carried out with a couple of dummies in the out-of-position and the injury processes are analyzed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.108-117
• /
• 2003

Development of advanced restraint system challenges both restraint and automobile manufacturers to come up with proper airbag design to reduce occupant out-of-position related injury. The important component of the advanced restraint system is the multi stage inflator. The multi stage inflator can independently control two or more airbag inflation stages to maximize occupant protection. The objective of this research is to develop relationship between airbag inflation characteristics, the occupant positions and the airbag design variables. The tests are conducted using five kinds of inflators, two kinds of airbag cushion folding methods and two kinds of tear lines. In the case of inflator, the out-of-position tests are performed with a traditional inflator, a depowered inflator and a dual stage inflator. And the efficiency and injury mechanism are evaluated by analyzing the injury pulses and values. Using this relationship, airbag design guideline is established for airbag aggressivity thresholds and the risk of injury is identified according to occupant positions.

• Culinary science and hospitality research
• /
• v.10 no.3
• /
• pp.83-96
• /
• 2004

According to construction of global administration environment, all over the world was ended up in infinite competition period. Because eating out company also competes with another company, it must enjoy competitive power high position to secure high position continuously, classified by formation constituent's individuation and two aspects of organic special quality by the factor. Individuation classified by formation constituent's business ability, personal relations, age factors of Information Technology, and organic special quality classifies by factor of formation culture and result that analyze eating out company's business condition competitive power reinforcement effect factor is same as following. First, was construed by company culture, personal relations, business ability period of ten days with family Restaurant, and Information Technology showed that do not influence. Competitive power reinforcement effect factor with special restaurant was construed by company culture, personal relations, business ability period of ten days, and fast food company culture and Information Technology factor with hotel restaurant company culture by competitive power reinforcement effect factor construe.

• Progress in Medical Physics
• /
• v.27 no.2
• /
• pp.79-85
• /
• 2016

The objective of this study is to increase the accuracy of dose transmission in radiation therapy using two types of treatment tables, standard exact couch (Varian 21EX, Varian Medical Systems, Milpitas, CA) and 6D robotic couch (Novalis, BrainLAB A.G., Heimstetten, Germany)). We examined the dose attenuation based on the two types of treatment tables and studied the dose of attenuation using the phase (In/Out) for the standard exact couch. We measured the relative dose according to the incident angle of a penetrative photon beam under a treatment table. The incident angle of the photon beam was from $0^{\circ}$ to $360^{\circ}$ in the increments of $5^{\circ}$. The reference angle was set to $0^{\circ}$. Furthermore, the relative dose of the 6D robotic couch was measured using 6 MV and 15 MV, and that of the standard exact couch was measured at the sliding rail position (In-Out) using 6 MV and 10 MV. In the case of the standard exact couch, the measured relative dose was 16.53% (rails at the "In position," $175^{\circ}$, 6 MV), 12.42% (rails at the "In position," $175^{\circ}$, 10 MV), 13.13% (rails at the "Out position," $175^{\circ}$, 6 MV), and 9.96% (rails at the "Out position," $175^{\circ}$, 10 MV). In the case of the 6D robotic couch, the measured relative dose was 6.82% ($130^{\circ}$, 6 MV) and 4.92% ($130^{\circ}$, 15 MV). The photon energies were surveyed at the same incident angle. The dose attenuation for an energy of 10 MV was 4~5% lower than that for 6 MV. This indicated that the higher photon energy, lesser is the attenuation. The results of this study indicated that the attenuation rate for the 6D robotic couch was confirmed to be 1% larger than that for the standard exact couch at 6 MV and $180^{\circ}$. In the case of the standard exact couch, the dose attenuation was found to change rapidly in accordance with the phase ("In position" and "Out position") of the sliding rail.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.177-183
• /
• 2004

The out-of-positioned small female drivers are most likely to be injured during airbag deployment due to their stature and proximity to the steering wheel and airbag module. In order to investigate the injury mechanisms, some experimental studies with Hybrid III 5% female dummy and with female cadavers could be found from the open literatures. However, the given information from those experimental studies is quite limited to the standard conditions and might not be enough to estimate the airbag inflation aggressiveness regarding on the occupant responses and injury. In this study, a finite element analysis has been performed in order to investigate the airbag-induced injuries. A finite element 5% female human model in anatomical details has been developed. The validation results of the model are also introduced in this paper.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.578-580
• /
• 2005

This paper proposes the algorithm for the initial pole-position estimation of a surface PM-LSM, which is carried out under the pseudo-position control with-out a pole sensor and is insensitive to the motor parameters. This algorithm is based on the principle that the initial pole-position is calculated by the reverse trigonometric-function using the two reference currents, which are informed from the speed controller. The effectiveness of the proposed algorithm is confirmed by the arithmetical analysis and the experiment. IPP is well estimated within a satisfied moving-distance and a shorter estimation taken-time even if large disturbance such as cogging and friction are existed.

• Geomechanics and Engineering
• /
• v.36 no.1
• /
• pp.71-81
• /
• 2024

This study analyzes the pull-out behavior of tunnel-type anchorage under various joint conditions, including joint direction, spacing, and position, using a finite element analysis. The validity of the numerical model was evaluated by comparing the results with a small-scaled model test, and the results of the numerical analysis and the small-scaled model test agree very well. The parametric study evaluated the quantitative effects of each influencing factor, such as joint direction, spacing, and position, on the behavior of tunnel-type anchorage using pull-out resistance-displacement curves. The study found that joint direction had a significant effect on the behavior of tunnel-type anchorage, and the pull-out resistance decreased as the displacement level increased from 0.002L to 0.006L (L: anchorage length). It was confirmed that the reduction in pull-out resistance increased as the number of joints in contact with the anchorage body increased and the spacing between the joints decreased. The pull-out behavior of tunnel-type anchorage was thus shown to be significantly influenced by the position and spacing of the rock joints. In addition, it is found that the number of joints through which the anchorage passes, the wider the area where the plastic point occurs, which leads to a decrease in the resistance of the anchorage.

• Journal of Korean Academy of Nursing
• /
• v.5 no.1
• /
• pp.133-143
• /
• 1975

Most of mothers place their babies in either supine or prone position without change of position. Studies comparing supine and prone position of the newborn infants -have already been performed with the result that the prone position is relatively better than the supine position. However, one kind of position recommended to the mothers is not sufficient for the good rearing practice of children, because the same position placed for period long of time may bring out physical, mental tension and fatigue, and deformities of the skull and the thorax. For this reason nurses have to find out other position which has identical or more advantages than prone position so as to perform the position change for the babies. Main purpose of this study is to identify the differences of vital signs, the number of urination, defecation, diaper rash, crying and amount of feeding of the newborn infants with prone position or lateral position during the first three days of life. Sixty two newborn infants who were delivered at Seoul National University Hospital during the period from July 1 to September 5, 1974 were chosen as subjects for this study. The criteria for the choice of subjects were the babies born with vaginal delivery; body weight 2.5kg or over at birth; Apgar score Seven or over; and gestation period between thirty-eight months ana forty- two months. Of these subjects, by random sampling, thirty-one newborn infants were placed in the prone position and the other thirty-one in the lateral position. The results of this study reviewed in a statistical analysis of the t-test to obtain the following findings : 1. The heart rates of babies in the prone position were the mean heart rates of 135.03 and those in the lateral position 135.98 without any statistically significant difference. 2. There was no significant difference of respiration rate between two groups : a group in the prone position showed the mean respiration rates of 45,57 and the other in the lateral position 46.49. 3. There was no significant difference of body temperature between two groups: the mean body temperature of a group placed in the prone position was 98$^{\circ}$18'F(36$^{\circ}$77'C) and that of the other group 98$^{\circ}$20'F(36$^{\circ}$78'C). 4. One baby showed diaper rash only in a group of infants in the prone position. 5. The number of crying of the babies in the prone position were 23.70 and those in the lateral position 30.00 with a statistical difference at 5 percent level. 6, There was no difference of frequency of urination between two groups: the mean frequency of a group placed in tile prone position was 5.44 and that of the other group 5.06, 7. There was no significant difference of frequency of defecation between two groups : the mean frequency of a group placed in the prone position was 4.20 and that of tile other group 4.21, 8. There was no significant difference of feeding amount between two groups : the average amount of a group in the prone position showed 325.03 and that of the other group in the lateral position 291.51. All the above results mean that we may substitute tile lateral position for the Prone position or utilize both position for tile rearing practice of the babies.

• Physical Therapy Rehabilitation Science
• /
• v.5 no.1
• /
• pp.15-21
• /
• 2016

Objective: The purpose of this study was to see the changes in muscle activity of the upper limb in persons using a smartphone. Design: Cross-sectional study. Methods: An experiment was conducted to target 15 right-handed university students. Experiments were carried out for students using cell phones for more than a year. In this study, experiments were carried out with one-handed and both handed operation of smartphone use in a sitting position, the same parameters with smartphone use in a standing position. The experiments were carried out by having the subjects write a text message in Korean on the smartphone for 3 minutes repeated 3 times with a rest period of 10 seconds given between each 3 minute period. Electromyography (EMG) was used to record the muscle activity of the upper trapezius (UT), extensor carpi radialis (ECR), and abductor pollicis (AP) during phone operation. Results: The muscle activity of the AP and ECR were significantly higher during single handed compared to double handed in both sitting and standing position (p<0.05). The muscle activity of the ECR was significantly higher in standing position compared to sitting position with double handed use of the smartphone (p<0.05). UT muscle activity of the right has been activated more than twice compared to the left UT in a sitting position (p<0.05). And UT muscle activity on the right has been activated more than five times compared to the left in a standing position (p<0.05). Conclusions: Using smartphone with double hand is useful for the prevention of musculoskeletal disorders.

• The Korean Journal of Nuclear Medicine
• /
• v.16 no.1
• /
• pp.49-54
• /
• 1982

For this study, the authors obtained and examined anterior views of the liver and spleen in two different positions, upright and supine, of 39 normal subjects and 20 patients with hepaticpathology by means of $^{99m}Tc-colloid$ and gamma camera. This examination confirms the following findings. In general, it is shown, left lobe of the liver in upright position becomes longer in height than in supine position, while the distance between lateral margin of the liver and that of the spleen becomes father in with in supine position than in upright position. The upper margin of liver moves more downward in upright position than in supine. It is noticeable that as for 5 cases with severe chronic liver disease, there is minimal alteration of the liver shape between in two positions. The comparison of the both positions for the better liver scan shows the following finding. Prominent caudate and/or left lobe are marked in the upright position in 16 cases out of the total 59, while none is found in the supine. The false cold area in lower part of the liver disappears in 7 cases in the upright position, while only one shows the disappeance of the false cold area in the supine. Left liver margin due to close contact of spleen is blurred in 3 cases in the upright position. In total 23 cases out of 59 support that the upright position is better for the liver scan, while only 4 cases support the supine position is better. These findings support two assumptions. One is that upright view can bo expected more improved resoluton than supine view for liver scan. Second is that minimal change of the liver shape in both views indicate the serious abnormality in the liver.