• 소음진동
• /
• 제2권2호
• /
• pp.107-116
• /
• 1992

An adaptive signal processing technique is implemented for the active noise cancellation of the plane acoustic wave propagating in a duct. To avoid the instability caused by the acoustic feedback from the control speaker to the detect microphone, an off-line modeling of the acoustic feedback plant is done using the FIR filter. Auxiliary path required for the filtered-x LMS algorithm is modeled as well. Before going into the experiments, a simulation is carried out under the same conditions with experiments. The simulation shows that the longer the length of the adaptive filter is, the better the results are achieved. Experiments have been carried out at lower audio frequency range (50 - 400Hz), and the results are in good agreements with those of simulation study. As a results of this adaptive noise control, around 50dB is reduced for a pure tone noise, and for a bandlimited noise with the bandwidth of 316Hz, a maximum of 30dB noise reduction is attained.

• 한국소음진동공학회논문집
• /
• 제11권6호
• /
• pp.181-192
• /
• 2001

The power flow analysis (PFA) has been performed to analyze the vibration of coupled plates excited by a point force in an arbitrary direction. The point force generates the out-of-plane vibration associated wish flexural waves and the in-plane vibration associated with longitudinal and shear waves. The energy governing equation for each type of waves was introduced and solved to Predict the vibrational energy density and intensity generated by the out-of-plane and in-plane components of the point force in an arbitrary direction. The wave transmission approach was used to consider the mode conversion at the joint of the coupled plates. Numerical results for vibrational energy density and intensity on the coupled plates were presented. Comparison of the results by PFA with exact results showed that PFA can be an effective tool to predict the spatial variation of the vibrational energy and intensity on the coupled plates at high frequencies.

• Journal of information and communication convergence engineering
• /
• 제13권1호
• /
• pp.50-55
• /
• 2015

We report design and simulation of a two-dimensional (2D) silicon-based nanophotonic crystal as an optical insulator to enhance the light emission efficiency of light-emitting diodes (LEDs). The device was designed in a manner that a triangular array silicon photonic crystal light insulator has a square trench in the middle where LED can be placed. By varying the normalized radius in the range of 0.3-0.5 using plane wave expansion method (PWEM), we found that the normalized radius of 0.45 creates a large band gap for transverse electric (TE) polarization. Subsequently a series of light propagation simulation were carried out using 2D and three-dimensional (3D) finite-difference time-domain (FDTD). The designed silicon-based light insulator device shows optical characteristics of a region in which light propagation was forbidden in the horizontal plane for TE light with most of the visible light spectrum in the wavelength range of 450 nm to 600 nm.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2009년도 임시총회 및 하계학술연구발표회
• /
• pp.161-162
• /
• 2009

• 한국항공우주학회지
• /
• 제33권1호
• /
• pp.48-53
• /
• 2005

본 연구의 목적은 기계적인 전단층 자극방법을 이용 스월제트 혼합향상의 가능성을 고찰함에 있다. 이를 위해 기계적 자극장치가 설계, 제작되었다. 주요 구성품으로는 두개의 아음속 노즐, 스월 발생기, 그리고 유동 자극기 등이다. 실험은 다음과 같은 다양한 헬리컬 모드들에서 수행되었다; m=+0, m=$\pm$1, m=$\pm$2, m=$\pm$3, m=$\pm$4. 열선유속계를 이용한 plane 파동과 헬리컬 파동 자극에 따른 제트속도 측정이 이루어 졌다. 다양한 헬리컬 모드에서의 결과 값들이 기준 값(plane-wave)과 비교되었다. 획득된 결과는 3-D mesh plot 과 2-D contour plot으로 표현되었다. 이로써 새로 고안된 장치는 헬리컬 불안정파 자극에 대한 효과를 입증하였고 또한 결과적으로 스월제트의 혼합을 증진시켰다.

• Structural Engineering and Mechanics
• /
• 제72권4호
• /
• pp.455-468
• /
• 2019

The present article is aimed at studying the reflection phenomena of plane waves in a homogeneous, orthotropic, initially stressed magneto-thermoelastic rotating medium with diffusion. The enuciation is applied to generalized thermoelasticity based on Lord-Shulman theory. There exist four coupled waves, namely, quasi-longitudinal P-wave (qP), quasi-longitudinal thermal wave (qT), quasi-longitudinal mass diffusive wave (qMD) and quasi-transverse wave (qSV) in the medium. The amplitude and energy ratios for these reflected waves are derived and the numerical computations have been carried out with the help of MATLAB programming. The effects of rotation, initial stress, magnetic and diffusion parameters on the amplitude ratios are depicted graphically. The expressions of energy ratios have also been obtained in explicit form and are shown graphically as functions of angle of incidence. It has been verified that during reflection phenomena, the sum of energy ratios is equal to unity at each angle of incidence. Effect of anisotropy is also depicted on velocities of various reflected waves.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2010년도 임시총회 및 하계학술연구발표회
• /
• pp.112-113
• /
• 2010

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.440-444
• /
• 2006

In this paper an analytical study is carried out to improve the capacity of absorbing boundary using dashpot, one of the most widely used absorbing boundaries in FEM. Using harmonic plane wave equation, absorbing boundary condition is modified to maximize its capacity according to the incident angle. Validity of the modified absorbing boundary conditions is investigated by adopting the solution of Miller-Pursey which is the solution for the wave propagation in semi-infinite elastic media, and the absorption ratio is calculated according to various Poisson's ratios.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.138-140
• /
• 2002

We fabricated textured Ni substrate for YBCO coated film and evaluated the degree of texture in terms of rolling condition and annealing time. The substrate was compacted from pure Ni powder and reduced the thickness to 100 $\mu$m by rolling followed by heat treatment. As decreasing the thickness of substrate, it was observed that the non-uniform deformation such as ‘wave edge’ or ‘wave buckle’ developed locally on it, causing reduced texture. On the other hand, uniformly deformed substrate showed better cube texture indicating the FWHM of in-plane and out-of-plane of about $11^{\circ}$ ~ $14^{\circ}$. In addition, annealing at $1000^{\circ}C$ for 1~ 8 hr did not make a remarkable difference on the texture.

• 대한기계학회논문집A
• /
• 제40권11호
• /
• pp.919-925
• /
• 2016

본 연구에서는 비선형 체적파 혼합 기법의 선행연구를 토대로 램파 기법에 적용하여 램파 혼합 기법에 대한 연구를 수행하였다. 램파 혼합 기법의 타당성을 증명하기 위해 결함이 없는 시편과 부식에 의해 발생된 표면 결함이 있는 시편에 대해 실험을 진행하였다. 실험 대조군으로는 램파의 지배적인 면내변위와 면외변위를 가지는 모드 및 주파수로 선정하였다. 그 결과 램파 혼합 기법으로도 결함 검출이 가능하였고, 기존의 램파 기법의 경향성과 유사하게 나타났다. 그리고 이론과 동일한 지배적인 변위와 모드가 발생된 것을 확인 할 수 있었다. 그러나 결함 검출 성능은 측정 방법 및 단순 모드 선정에 따라 결정되는 것이 아니라 변위 비율에 따라 결정된다.