• Journal of the Korean Society for Precision Engineering
• /
• v.2 no.3
• /
• pp.59-69
• /
• 1985

The purpose of this paper is to investigate the variations of out-of- roundness due to its assessment methods for the practical workpieces. Experiments were carried out with the test specimens having the typical roundness profile. The roundness measuring system which has the autocentripetal functions and the automatic centering table unit was used. From the experimental results, it was found that the ratio of LSC to MZC values varied with the shape of roundness profiles, and the rate of variation for out-of-roundness was increased logarithmically with the increment of undulations by the effect of filter. Therefore, it is suggested that the least squares center method should be useful with the sufficient accuracy except for some special cases in the roundness profiles, and the condition of filter has considerable influence upon the out-of-roundness to be measured.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.3
• /
• pp.18-26
• /
• 1991

A study on the measuring and evaluation of LSC(Least Square Center) roundness was carried out. The experimental set-up was made by index head and indicator, and the measuring data were compensated by a developed computer program. The results obtained are as follows : 1) An index head can conveniently be used to measure LSC roundness. 2) A program for calculating LSC roundness is developed. 3) Without a high quality roundnes measuring apparatus, LSC roundness can be measured and calculated by using index head and the developed program in machine shop as well as in a measuring room

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.291-292
• /
• 2006

Currently A demand of high precision workpiece is increasing in industry. At present, roundness measuring machine using Air bearing, coordinate measuring machine that are used from measurement station. but these machines will not be able to apply to In-line process. because of like these machine's price are very expensive and measurement time is long. also, the complexity of conventional roundness measurement method based on fourier transform, it makes difficult to development analysis program. This work present new architecture of a Out-diameter measuring system fur analysis of roundness of product. In this system, the influence of table motion errors is minimize by using two LVDT sensor and knife edge contact tip. We are produce a test machine and make an experimenter on Out-diameter of test bearing. The measurement result compared with roundness measuring machine.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.643-644
• /
• 2008

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.8
• /
• pp.1029-1034
• /
• 2010

In this paper, we present the roundness profile and run-out error measurement for a rotating shaft. The devices for measuring the roundness require a precision rotation table which is used as a reference to obtain the circular profile. Therefore, the roundness measuring system is expensive and requires precision manufacturing. The two-point method for succession measurement has been used to obtain a linear profile or used in straightness measurement using two displacement measuring devices. In this paper, the method is used for measuring the circular profile of a rotating shaft. A method to remove the vibration of the shaft, i.e., the run-out, is used, and the original circular profile is obtained from the measured raw data that excludes the run-out error of the rotating shaft. This method will be useful for obtaining the precise circular profile without using a precision reference circular artifact.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.153-158
• /
• 2000

This study was carried out in order to investigate the relationship roundness of fly ashes and fluidity of fly ash cement paste. electrostatic precipitator system in coal-fired power plant have many successive collection fields in the direction of flue gas travel. In experiment, the roundness of fly ashes collected from the same location had similar values regardless of the load or boiler, and they increased going from the 1st collection filed to third collection filed in the direction of gas movement. In considering the relation between roundness of fly ashes and fluidity of fly ash cement paste, it has a high correlation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.840-846
• /
• 2007

This paper investigates the dynamic behavior of a HDD spindle system due to the imperfect roundness of a rotating shaft. The shaft of a spindle motor rotates with eccentricity by the unbalanced mass of the rotating part. The eccentricity generates the run-out of a spindle motor which results in the eccentric motion of a rotating part. Roundness of a shaft affects this motion which limits the memory capacity of a HDD. This research proposes a modified Reynolds equation for the coupled journal and thrust FDBs to include the variable film thickness due to the roundness. Finite element method is used to solve the Reynolds equation for the pressure distribution. Reaction forces and friction torque are obtained by integrating the pressure and shear stress, respectively. The dynamic behavior is determined by solving the equations of a motion of a HDD spindle system in six degrees of freedom with the Runge-Kutta method to characterize the motion of a rotating part. This research shows that the roundness of a rotating shaft causes the excitation frequency with integer multiple of a rotating frequency.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.4
• /
• pp.52-60
• /
• 1999

In this study the effect of roundness error with respect to the cutting conditions using the external cylindrical work piece by end mill cutting in a machining center was studied. the end mill used in this study is HSS coated with Ti-N which is of Ø 12-4 flutes. The material of workpiece is SM20C and cutting oil is used as a cooling flued The cutting experiments were carried out for the several cutting conditions(depth of cut height of end mill feed rate revolution per minute and cutting direction) and their roundness effects were compared using the least squares circle measuring method. The experimental results are summarized as follows : 1) The cutting depth is dominant for the roundness of a cylindrical work piece and the cutting speed must be determined precisely when the cutting depth is large 2) When the cutting direction in circular manufacturing is the same with the spindle rotation i.e up-cutting condition the surface roundness is also improved.

• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.31-37
• /
• 1988

A phase different method to evaluate the instrument error of roundness measuring instrument and the form error of specimens for the calibration of the instrument is used. An instrument with a rotary table supported by an air bearing was calibrated by using the standard balls as a standard. The calibration was carried out repeatedly by setting the same ball in 12 phase angles(per 30.deg.) on the table and by recording their roundness errors with a magnification of 100,000 times. As a result of data analysis of all the observations, readout at each of 144 orientations(per 2.5.deg.) from recorded data file, the error of performance of the instrument and the specimens are separated. In the particular instrument used in the present experiment, the error of the instrument was determined with the accuracy of 0.0164 (.mu.m) and the form error of the specimens was determined with the accuracy of 0.0264,0.0172(.mu.m), respectively. If the instrument was calibrated by using the above specimens, then the accuracy of the measurement of roundness error can be improved to about 0.017 (.mu.m).

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.5
• /
• pp.17-24
• /
• 2001

Recently, the requirements for high precision and efficiency machining are gradually increased to raise international competitiveness at the industrial fields of die and molds. This trend had made effects on the industrial fields in Korea and which needs fur studying of high precision and efficiency machining. This study is to investigate the effects of the non-out of end mill in the external cylindrical machining operated by solid carbide end mills with Al-alloy in high speed machining center relating to high spindle revolution and frost fred per minute on the dimensional precision, roundness of workpiece. From the results of experimentations followings are obtained; when Al-alloy is processed by the external cylindrical cutting of end milling through the high speed revolution, if the spindle revolution is higher relating to radial depth of cut, feed per tooth in very lower situation, finally, productivity can be raised because high precision and quality products are machined high efficiently.