• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.112-117
• /
• 2001

An experiment using high preheated and swirled air in the coaxial diffusion flame burner was carried out in order to decrease NOx emission and improve the thermal efficiency. $N_2$ gas was used for diluent and propane was utilized for fuel. Combustion using high preheated air has two remarkable characteristics ; (1) low NOx emission with increasing dilution level, (2) high thermal efficiency in the furnace. Also, swirled air can mix fuel and oxidizer well in condition of diffusion flme and maintain the stable combustion. The color of flame changes from yellow to blue green according to increasing the dilution level of mixture gas. NO emission decreased with increasing dilution level and the swirl number.

• 한국의류학회지
• /
• 제27권11호
• /
• pp.1300-1306
• /
• 2003

Cotton fibers were treated, with 1, 2, 3, 4-butanetetracarboxylic acid (BTCA) which is formaldehyde-free reagent to impart durable press performance. The dyeability, dyeing rate, and diffusion coefficient, of BTCA treated cottons were compared to prove the changes of pore size structure using direct dyes and disperse dyes. Diffusion coefficients of BTCA treated cotton fibers were determined at acidic conditions to figure out the effect of swelling. Since the dyeability of BTCA treated cotton fibers dyed with direct dyes were reduced, it is considered that the dyeability to direct dyes is related to the quantity of residual large pores. But, the dyeability to disperse dyes were increased due to the less reduction of small pore sizes and the increase of hydrophobicity in BTCA treated cotton cellulose. The dyeability to direct dye and disperse dye were decreased more at acidic conditions than at neutral conditions. It seemed that the swelling of pores in the fiber were inhibited.

• 한국세라믹학회지
• /
• 제30권1호
• /
• pp.55-61
• /
• 1993

In the WSi2/CVD-Si/SiO2 polycide structure, electrode resistance and its property were studied as a function of deposition temperature and thickness of CVD-Si, diffusion condition of POCl3, and WSi2 being deposited or not. Resistivity of poly-Si is decreased with increment of thickness in the case of POCl3 diffusion of low sheet resistance, but it is increased in the case of high sheet resistance. The resistivity of amorphous-Si is generally lower than that of poly-Si. Initial sheet resistance of poly-Si/WSi2 gate electrode is affected by the thickness and resistance of poly-Si layer, but final resistance after anneal, 900$^{\circ}C$/30min/N2, is only determined by WSi2 layer. Flourine diffuses into SiO2, but tungsten does not. In spite of out-diffusion of phosphorus into WSi2 layer, the sheet resistance is not changed.

• 한국환경과학회지
• /
• 제11권12호
• /
• pp.1321-1326
• /
• 2002

A numerical model is investigated to predict a behavior of the gaseous volatile organic compounds and a subsurface contamination caused by them in the unsaturated zone. Two dimensional advective-dispersion equation caused by a density difference and two dimensional diffusion equation are computed by a finite difference method in the numerical model. A laboratory experiment is also carried out to compare the results of the numerical model. The dimensions of the experimental plume are 1.2m in length, 0.5m in height, and 0.05m in thickness. In comparing the result of 2 methods used in the numerical model with the one of the experiment respectively, the one of the advective-dispersion equation shows better than the one the diffusion equation.

• Journal of applied mathematics & informatics
• /
• 제38권5_6호
• /
• pp.489-506
• /
• 2020

The spatial fractional diffusion equation can be discretized by employing the implicit finite difference scheme using the shifted Grünwald formula. The discretized linear system is obtained, whose the coefficient matrix has a diagonal-plus-Toeplitz structure. In order to solve the diagonal-plus-Toeplitz linear system, on the basis of circulant and skew-circulant splitting (CSCS splitting), we construct a new and efficient iterative method, called DSCS iterative methods, which have two parameters. Than we prove the convergence of DSCS methods. As a focus, we derive the simple and effective values of two optimal parameters under some restrictions. Some numerical experiments are carried out to illustrate the validity and accuracy of the new methods.

• Journal of Photoscience
• /
• 제4권3호
• /
• pp.105-112
• /
• 1997

The fluorescence quenching of 2, 5-di-(5-tert-butyl-2-benzoxazolyl)-thiophene (BBOT) by aniline in five different solvents namely heptane, hexane, cyclohexane, dioxane and acetonitrile has been carried out at room temperature with a view to understand the quenching mechanisms. The experimental results show positive deviation in the Stern-Volmer plots in all the solvents. In order to interpret these results we have invoked the Ground state complex and sphere of action static quenching models. Using these models various rate parameters have been determined. The magnitudes of these parameters suggest that sphere of action static quenching model agrees well with the experimental results. Hence this positive deviation is attributed to the static and dynamic quenching. Further, with the use of Finite Sink approximation model, it was possible to check these bimolecular reactions as diffusion-limited and to estimate independently distance parameter R$^1$ and mutual diffusion coefficient D. Finally an attempt has been made to correlate the values of R$^1$ and D with the values of the encounter distance R and the mutual diffusion coefficient D determined using the Edward's empirical relation and Stokes-Einstein relation.

• 분석과학
• /
• 제8권4호
• /
• pp.663-668
• /
• 1995

Ion transport of a polypyrrole/chloride (PPy/Cl) film and a polypyrrole/poly(styenesulfonate) (PPy/PSS) film as a function of applied dc potential was investigated by employing electrogravimetric impedance technique and electrochemical impedance technique. The cation and anion contribution to the whole charge capacitance and the diffusion coefficients of cation and anion in a PPy/PSS film were calculated by fitting the electrogravimetric impedance data with proposed model circuit. The diffusion coefficients of $Na^+$ in a 1 M $NaClO_4$ solution are over 1 order of magnitude larger than those of $ClO{_4}^-$, and $ClO{_4}^-$ contribution to charge compensation decreases as dc potential lowers. The charge compensation of a PPy/Cl film ir a 1 M CsCl solution is carried out largely by $Cl^-$ at 0.2 V vs. Ag/AgCl and by $Cs^+$ as well as $Cl^-$ at -0.4 V.

• Journal of Welding and Joining
• /
• 제18권6호
• /
• pp.62-67
• /
• 2000

Metallurgical characteristics of bonded region and high temperature mechanical properties of heat resistant alloy, Fe-35Ni-26Cr during liquid phase diffusion bonding were investigated employing AM17 insert metal. The insert metal for bonding, AM17 was newly developed Ni-base metal using interpolation method. Bonding of specimens were carried out at 1,403~1,463K for 600s in vacuum. The microconstituents in the bonded interlayer disappeared in the bonding temperature over 1,423K. The microstructures, alloying elements and hardness distribution in the base metal. The tensile strength and elongation of the joints at elevated temperatures were the same level as one of the base metal in the bonding temperature over 1,423K. The creep rupture strength and rupture lives of joints were almost identical to those of base metal.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2271-2282
• /
• 1995

Numerical simulations for the effects of secondary flow and turbulence diffusion on the particle concentration distributions have been carried out for the single stage electrostatic precipitator. The electrohydrodynamic secondary flow, particle concentration distribution and collection efficiency have been evaluated as a function of dimensionless parameters such as Re, $N_{end}$, $P_{e}$ x. The results of simulations show that for increasing secondary flow intensity the concentration distribution is drastically deformed and collection efficiency is decreased which is more than due to turbulent diffusion.n.n.

• 한국시스템다이내믹스연구
• /
• 제14권4호
• /
• pp.5-35
• /
• 2013

The study examines the play theory based internet rumor process by using simulating tools, Vensim, which offer a new theoretical basis from which to explore complex adaptive social system. Internet rumor is not a simple linear diffusion process, but a complex interaction behavior between the actors of production and diffusion. Rumor actors consist of two type of diffusion, which is rumor mongers and playful mongers. These two type of mongers make the internet rumor as collective system. Playful mongers play strategically to maximize playfulness. Internet rumor as play is consequence of collective framing constituted by dynamic interaction and playfulness. The networking space spreading internet rumor function as a playground which mobilize play rule, ignoring fact based framing. Rumor as paly, even though it turns out to be a false and loses the public attentions rumor sustains the game play function which makes the rumor without natural extinction. The study proves that playful mongers is a main actors in rumor play ground.