• Journal of Ginseng Research
• /
• v.32 no.2
• /
• pp.120-126
• /
• 2008

This study was carried out to investigate the some physicochemical properties of Korean red ginseng (Panax ginseng C.A. Meyer) water extract (RGWE) after heated with high temperatures above $100^{\circ}C$ for 2 hours. RGWEs were heated at 100, 110 and $120^{\circ}C$ for 2 hours by using autoclave. After RGWEs were heated at high temperature for 2 hours without not adjustment of pH, the changes of saponin, free sugars, mineral and color in the RGWEs were investigated. Total ginsenoside content in control was 1.99%, while those of RGWE were 1.65, 1.49 and 1.29% when treated at 100, 110 and $120^{\circ}C$, respectively. The contents of total ginsenoside showed decreased tendency as heating temperatures were increased. The ginsenoside-$Rh_{2}$ and $-Rg_{3}$, which have been reported as very stable red ginseng ginsenosides, showed relatively strong spots on TLC when RGWEs were heated at 110 and $120^{\circ}C$. In case of free sugars in RGWEs, fructose, glucose and maltose showed high contents when compared with control, while Fe, Ca and Mg ions showed very low contents. Value of L in RGWE treated with high temperature was almost the same with control, while values of a and b were increased. Values of a were increased from -0.86 of control to +0.04, +0.05 and +1.14 when treated with 100, 110 and $120^{\circ}C$, respectively. Values of b also were increased from 27.68 of control to 33.61, 33.61 and 37.42 when treated with 100, 110 and $120^{\circ}C$, respectively. Values of total color in RGWEs treated with high temperatures, E, were finally increased by values of a and b.

• Microbiology and Biotechnology Letters
• /
• v.35 no.1
• /
• pp.30-35
• /
• 2007

This study was carried out to investigate the usefulness of the aerial part of Cnidium officinale Makino as a bioactive material source. The aerial part(leaf and stem) of Cnidium officinale Makino was extracted with three kinds of solvents and determined their antimicrobial activities against several bacteria and yeast strains using the paper disc method and the microtiter dilution method. The extracts of the Cnidium offocinale aerial part exhibited the broad spectrum of antibacterial activity against Gram (+) and Gram (-) bacteria, including food-borne pathogens such as Listeria monocytogenes, Salmonella typhimurium, and Staphylococcus aureus. The extracts of Cnidium officinale also showed antifungal activity against Saccharomyces cerevisiae. The ethyl acetate extracts completely inhibited the growth of Staphylococcus aureus and Pseudomonas aerogenes, and moderately inhibited the growth of Escherichia coli and Enterobacter cloacae at the concentration of 0.5 mg/mL. However, water extract of Cnidium officinale exhibited lower antimicrobial activity than ethyl acetate and methanol extracts. The inhibitory effect of the ethyl acetate extract of Cnidium officinale Makino was not destroyed by heating at $100^{\circ}C$ for 30 min or at $121^{\circ}C$... for 15 min. These results suggest that the aerial part of Cnidium officinale Makino could be a useful source for a natural antimicrobial material.

• Transactions of the Korean hydrogen and new energy society
• /
• v.11 no.3
• /
• pp.119-125
• /
• 2000

To improve the photochemical energy conversion efficiency and the stability of CdS particulate film electrode which is used to produce hydrogen from the aqueous $H_2S$ solution photoelectrochemically, surface treatment of this film was carried out using $TiCl_4$ solution. CdS particles for preparation of the films were synthesized by precipitation reaction of $Cd({NO_3})_2{\cdot}9H_2O$ and $Na_2S{\cdot}4H_2O$. Then, the CdS sol was hydrothermally treated for 12hr in an autoclave with the variation of treatment temperature to control the crystalline phase of particles. CdS film electrode was thus prepared by annealing at $400^{\circ}C$ for 12hr of the wet-film cast at room temperature, and subsequently surface treated with $TiCl_4$ solution. The electrodes were characterized using XRD, SEM, and the photocurrent meter. The photocurrents of Cds film electrodes prepared with surface treatment were up to two times higher than the electrodes without surface treatment, indicating about $4.0mA/cm^2$. Hydrogen production rate in a continuous flow system using photoelectrochemical or photochemical cells prepared with surface treatment also increased in proportion to the increase of photocurrents.

• Clean Technology
• /
• v.18 no.1
• /
• pp.63-68
• /
• 2012

In this study, aluminum hydroxide ($Al(OH)_3$) was synthesized by Bayer process and sodium contained in $Al(OH)_3$ was removed with the acid solution such as HCl and acetic acid for the synthesis of high purity alumina. The bauxite produced in Queensland of Australia was used for the production of alumina by Bayer, and was crushed to a particle size of below 10 um by attrition mill. The crushed bauxite was treated in sodium hydroxide solution of 5 N for the elution of aluminum component. The elution of aluminum from bauxite was carried out at $140^{\circ}C$ and 3.4 atm in autoclave. The sample solution was separated to the red mud and liquid solution by filter paper. The elution of aluminum from bauxite was confirmed with changing a structure and aluminum content in both bauxite and red mud analyzed by XRD and EDX. Aluminum contained in the separated solution was crystallized to $Al(OH)_3$ with the addition of aluminum hydroxide used as the seed material. $Al(OH)_3$ powder obtained during the crystallization process was purified by several times washing with distillated water. It was also confirmed that the sodium remained in $Al(OH)_3$ powder is removed with acid solution. The purity of $Al(OH)_3$ powder produced in this study was 99.3% and the content of sodium was reduced to approximately 0.009% after the acid treatment.

• Korean Journal of Materials Research
• /
• v.25 no.2
• /
• pp.75-80
• /
• 2015

The carbon dioxide($CO_2$) released while producing building materials is substantial and has been targeted as a leading contributor to global climate change. One of the most typical method to reducing $CO_2$ for building materials is the addition of slag and fly ash, like pozzolan material, while another method is reducing $CO_2$ production by carbon negative cement development. The MgO-based cement was from the low-temperature calcination of magnesite required less energy and emitted less $CO_2$ than the manufacturing of Portland cements. It is also believed that adding reactive MgO to Portland-pozzolan cements could improve their performance and also increase their capacity to absorb atmospheric $CO_2$. In this study, the basic research for magnesia cement using $MgCO_3$ and magnesium silicate ore (serpentine) as main starting materials, as well as silica fume, fly ash and blast furnace slag for the mineral admixture, were carried out for industrial waste material recycling. In order to increase the hydration activity, $MgCl_2$ was also added. To improve hydration activity, $MgCO_3$ and serpentinite were fired at $700^{\circ}C$ and autoclave treatment was conducted. In the case of $MgCO_3$ as starting material, hydration activity was the highest at firing temperature of $700^{\circ}C$. This $MgCO_3$ was completely transferred to MgO after firing. This occurred after the hydration reaction with water MgO was transferred completely to $Mg(OH)_2$ as a hydration product. In the case of using only $MgCO_3$, the compressive strength was 3.5MPa at 28 days. The addition of silica fume enhanced compressive strength to 5.5 MPa. In the composition of $MgCO_3$-serpentine, the addition of pozzolanic materials such as silica fume increased the compression strength. In particular, the addition of $MgCl_2$ compressive strength was increased to 80 MPa.

• Composites Research
• /
• v.32 no.6
• /
• pp.395-402
• /
• 2019

The RFI process is an OoA process that fiber mats and resin films are laminated and cured in a vacuum bag. In case that resin film is insufficient to fill empty space in fibers, it makes void defect in composites and this void decrease mechanical properties of the composites. For this reason, non-destructive testing is usually used to evaluate void of manufactured composites. So, in this study, a manufacturing method of standard void specimens, which are able to be used as references in non-destructive testing, was proposed by controlling resin film thickness in the RFI process. Also, a fiber compaction test was proposed as a method to set the resin film thicknesses depending on target voids of manufacturing panels. The target void panels of 0%, 2%, and 4% were made by the proposed methods, and signal attenuation depending on void was measured by non-destructive testing and image analysis. In addition, voids of specimens for tensile, in-plane, short beam and compressive tests were estimated by signal attenuation, and mechanical properties were evaluated depending on the voids.

• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.405-412
• /
• 2001

Corrosion tests were carried out in $360^{\circ}C$ water and $360^{\circ}C$ 70ppm LiOH solution to investigate the corrosion behavior of new zirconium alloys (Zr-0.4Nb-0.8Sn-xFeCrMn, Zr-0.2Nb-1.1Sn-xFeCrMn, Zr-1.0Nb-xFeCu). Microstructures of tested alloys were analyzed by optical microscope and TEM. The cross-sectional surface and crystalline structure of the oxide layer were analyzed by SEM and XRD. From the results of corrosion test, all the alloys showed higher corrosion rates in $360^{\circ}C$ 70ppm LiOH aqueous solution thats in $360^{\circ}C$ water. Especially, high Nb-containing alloy exhibited the acceleration of corrosion rate in LiOH solution. The low Nb- and Sn-added alloys showed better corrosion resistance than the Sn- free high Nb alloy. from the effect of final annealing on the corrosion, it was observed that the partially recrystallized alloys showed better corrosion resistance than fully recrystallized alloys. This would be related to the size and distribution of the second phase particles.

• Economic and Environmental Geology
• /
• v.49 no.5
• /
• pp.371-380
• /
• 2016

This study aims to identify the mineraloical and petrographical characteristics of caprock from drilling cores of Pohang basin as a potential $CO_2$ storage site. Experiments and modeling were conducted in order to investigate the geochemical and mineralogical caprock effects of carbon dioxide. A series of autoclave experiments were conducted to simulate the interaction in the $scCO_2$-caprock-brine using a high pressure and temperature cell at $50^{\circ}C$ and 100 bar. Geochemical and mineralogical alterations after 15 days of $scCO_2$-caprock-brine sample reactions were quantitatively examined by XRD, XRF, ICP-OES investigation. Results of mineralogical studies, together with petrographic data of caprock and data on the physicochemical parameters of brine were used for geochemical modeling. Modelling was carried out using the The Geochemist's Workbench 11.0.4 geochemical simulator. Results from XRD analysis for caprock sample showed that major compositional minerals are quartz, plagioclase, and K-feldspar, and muscovite, pyrite, siderite, calcite, kaolinite and montnorillonite were included on a small scale. Results from ICP-OES analysis for brine showed that concentration of $Ca^{2+}$, $Na^+$, $K^+$ and $Mg^{2+}$ increased due to dissolution of plagioclase, K-feldspar and muscovite. Results of modeling for the period of 100 years showed that the recrystallization of kaolinite, dawsonite and beidellite, at the expense of plagioclase and K-feldspar is characteristic. Volumes of newly precipitation minerals and minerals passing into brine were balanced, so the porosity remained nearly unchanged. Experimental and modeling results indicate the interaction between caprock and $scCO_2$ during geologic carbon sequestration can exert significant impacts in brine pH and solubility/stability of minerals.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.341-347
• /
• 2008

The feasibility of commercializing the hydrothermal synthesis of Na-A type zeolite from siliceous mudstone has been conducted using a 50-liter bench-scale autoclave and the application of the zeolite as an environmental remediation agent. Siliceous mudstone, which is widely distributed around the Pohang area, was adopted as a precursor. The siliceous mudstone is favorable for the synthesis of zeolite because it contains 70.7% $SiO_2$ and 10.0% $Al_2O_3$, which are major ingredient of zeolite formation. The synthesis of zeolite was carried out under the following conditions that had been obtained from the previous laboratory-scale tests: 10hr reaction time, $80^{\circ}C$ reaction temperature, $Na_2O/SiO_2$ ratio = 0.6, $SiO_2/Al_2O_3$ ratio = 2.0 and $H_2O/Na_2O$ ratio= 98.6. The crystallinity and morphology of the zeolite formed were similar to those obtained from the laboratory-scale tests. The recovery and cation exchange ion capacity were 95% and 215 cmol/kg, respectively, which are slightly higher than those obtained in laboratory scale tests. To examine the feasibility of the zeolite as an environmental remediation agent, experiments for heavy metal adsorption to zeolite were conducted. Its removal efficiencies of heavy metals in simulated waste solutions decreased in the following sequences: Pb > Cd > Cu = Zn > Mn. In a solution of 1500 mg/L total impurity metals, the removal efficiencies for these impurity metals were near completion (> 99%) except for Mn whose efficiency was 98%. Therefore, the synthetic Na-A type zeolite was proven to be a strong absorbent effective for removing heavy metals.

• Food Science and Preservation
• /
• v.24 no.7
• /
• pp.1025-1033
• /
• 2017

In this study, Ledum palustre L. was extracted by 4 different methods (LPW, hot water extraction; LPA, autoclave extraction; LPU, ultrasonification extraction; LPE, 70% ethanol extraction) and LPE was fractionated by using polarity difference of each solvent and used as 4 samples (LPE/H, the n-hexane layer; LPE/E, the EtOAc layer; LPE/B, the n-BuOH layer; LPE/W, the $H_2O$ layer). Antioxidant activities of Ledum palustre L. extracts were measured by DPPH and ABTS. As a result, the DPPH and ABTS radical scavenging showed high activities with LPE (82.3%, 99.8%) and LPE/E (91.8%, 99.6%) at the concentration of $1,000{\mu}g/mL$. The anti-inflammatory activities of LPE and LPE/E were measured by the inhibitory activity against NO, $PGE_2$, TNF-${\alpha}$, IL-$1{\beta}$ and IL-6 production on LPS-stimulated Raw 264.7 macrophages. As a result of MTT assay, cell viabilities of LPE and LPE/E were more than 90% at $25{\mu}g/mL$. NO and $PGE_2$ productions were inhibited by LPE (NO: 50%, $PGE_2$: 70%) and LPE/E (NO: 57%, $PGE_2$: 73%) at the concentration of $25{\mu}g/mL$. The inhibition activities against TNF-${\alpha}$, IL-$1{\beta}$, IL-6 production were 24%, 47% and 40% at the concentration of $25{\mu}g/mL$ of LPE. In particular, LPE/E showed 51%, 57% and 62% inhibition activities at the same concentration, respectively. From the above results, it can be concluded that $1,000{\mu}g/mL$ of LPE and LPE/E have the high antioxidant activities similar with Vitamin C, and $25{\mu}g/mL$, the low concetration of LPE and LPE/E have excellent anti-inflammatory activities. Therefore, if more research about anti-aging, whitening and antimicrobial activity of Ledum palustre L. extracts is carried out in the future, it will be possible to use them as effective materials for the prevention and treatment of inflammatory diseases and in the areas of functional foods and cosmetics.