• Tribology and Lubricants
• /
• 제25권1호
• /
• pp.49-55
• /
• 2009

The frictional properties of automotive brake pads with four different ceramic materials such as magnesia, hematite, alumina, and zircon were investigated. A Krauss type friction tester using gray iron disks was used to examine the friction coefficient, intensity of friction force oscillation, and the tribe-surfaces. Results showed that the friction coefficient increased as the hardness of abrasives increases. Friction oscillation was also increased with hardness of the abrasives. However, the friction materials containing less abrasive particles produced stable friction films on the sliding surface. The transition between two-body and three body abrasion during sliding also played a crucial role in destructing the friction film on the pad surface and in determining various frictional properties.

• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.224-228
• /
• 2002

We investigated the quench properties of superconducting fault current limiters (SFCLs) connected in parallel. It was carried out as an effort to scale up the current capacity of SFCL toys texts. SFCLs were based on $YBa_2$$Cu_3$$O_{7}$ films coated in-situ with a gold layer and fabricated by patterning the films into 2 mm wide and 42 cm long meander lines by photolithography. Two SFCLS were connected in parallel and tested with simulated AC fault currents. Initially the current was divided unequally into branches of parallel connection due to unequal resistance of the branches. However, once quench started in the SFCLs, the current oscillated between the branches and then was distributed nearly equally between the branches. In other words, the elements quenched simultaneously. The oscillation amplitude decreased as the source voltage was increased: the oscillation was the most prominent near the quench current. The observed oscillation and the consequent simultaneous quench was understood in terms of quench start and development in the SFCLs.

• 천문학회보
• /
• 제44권2호
• /
• pp.40.3-40.3
• /
• 2019

Our recent observations of the Sun through strong spectral lines have revealed several important properties of the three-minute umbral oscillations inside sunspots -- the oscillations of intensity and Doppler velocity with periods of 2 to 3 minutes. The oscillations usually occur in the form of a time series of oscillation packets each of which lasts 10 to 20 minutes, not as continuous trains. Each oscillation packet is characterized by a singly peaked power spectrum of velocity oscillation. The oscillations propagate in the vertical direction from the photosphere to the corona. In the upper chromosphere, they develop into shocks that eventually collide with the transition region. When shocks propagate along a highly inclined direction, the merging of two successive shocks can take place. Once they enter the corona, they change to linear compressional waves. In the image plane, the three-minute oscillations propagate with high speeds in the transverse direction as well, usually propagating radially outwards from a point, and sometimes accompanying spiraling patterns of Doppler velocity. These observational properties can be theoretically explained by postulating the spatio-temporally localized source of fast MHD waves at a depth of about 2000 km below the surface, the excitation of slow MHD waves via mode conversion near the photosphere, and the resonance of the slow waves in the photospheric layer below the temperature minimum, and the nonlinear development of slow waves in the chromosphere.

• The Korean Journal of Ceramics
• /
• 제5권1호
• /
• pp.25-29
• /
• 1999

Complex viscosities of dense alumina slurries over 45% volume density measured with the oscillating method were correlated well with Casson model. Among several monosaccharides and disaccharides studied here, fructose and sucrose showed good rheological properties in making dense alumina slurry plastic compared to other monosaccharides and disaccharides like glucose, galactose, arabinose, xylose and maltose. Sucrose content or additional water content in dense alumina slurry with sucrose contributed to the plasticity of the slurries.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.825-828
• /
• 2005

Experimental and numerical study was done to confirm the effect of the flexible tube in pipeline on transient flow oscillation. Experiment was made for a pipeline with and without deformable flexible tube using a single pumping system of main stainless pipe. The wave speeds of main pipe and flexible tube were calculated from the pipe material properties, structures, and boundary conditions. Time dependent pressure fluctuations were calculated for the pipeline using the simple and the Kelvin-Voigt viscoelastic models for the deformation of main pipe and flexible tube. Pressure calculated by the Kelvin-Voigt viscoelastic model showed better agreement with measured one than pressure by the simple model. Experimental and numerical results show that the maximum pressure as well as amplitude of pressure oscillation was decreased by inserting short flexible tube in pipeline. Hence, inserted short flexible tube to pipeline was found to be effective for the suppression of strong pressure oscillation. Moreover, the wave speed in pipe was discussed based on numerical and experimental results.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2002년도 학술발표회 논문집(II)
• /
• pp.1195-1204
• /
• 2002

The impacts of El Nino Southern Oscillation (ENSO) phenomenon on climate are widespread and extend far beyond the tropical Pacific. The phenomenon can be characterized by Southern Oscillation Index (SOI) which is derived from values of the monthly mean sea level pressure barometric difference between Tahiti and Darwin, Australia. Its best-known extreme is the El Nino event. In this study, general statistical characteristics of SOI and the data from which it is derived (i.e. mean sea level pressure data at Tahiti and Darwin) are presented as guidance when using SOI far other analyses. The characteristics include the availability of the barometric pressure data, statistics of monthly pressure data, correlation of SO intensity, frequency analysis of SOI by magnitude and by month (January-December), duration properties of SOI by run analysis.

• 한국정보통신학회논문지
• /
• 제17권8호
• /
• pp.1885-1890
• /
• 2013

본 연구에서는 극저온에서 다중 게이트 구조인 나노스케일 p-채널 무접합(junctionless) 과 축적모드(accumulation mode) 다중 게이트 FET의 전기적 특성을 분석하였다. 헬륨을 사용하는 극저온 프로브 스테이션을 사용하여 소자를 측정하였다. 극저온과 낮은 드레인 전압에서 무접합 트랜지스터의 드레인 전류의 진동 현상이 축적모드 보다 심한 것을 알 수 있었다. 이는 무접합 트랜지스터에서는 채널이 실리콘 박막의 가운데 형성되므로 전기적 채널 폭이 축적모드 트랜지스터 보다 작기 때문이다. 온도가 증가할수록 드레인 전류가 증가하며 최대 전달 컨덕턴스도 증가하는 것을 알 수 있었다. 이는 온도가 증가할수록 문턱전압이 감소하며 이동도가 증가하는 데서 기인된 것을 알 수 있었다. 소자의 크기가 나노미터 레벨로 축소되면 양자현상에 의한 드레인 전류 진동이 상온에도 일어날 수 있다.

• 전기학회논문지
• /
• 제63권1호
• /
• pp.1-9
• /
• 2014

The parameters of electromechanical modes offer considerable insight into the dynamic stability properties of a power system. This paper describes an initial result for extraction of dynamic parameters from synchrophasor measurements collected on the KEPCO system. Dominant modes of the system are estimated by oscillation detecting program in K-WAMS. The critical wide-area modes of KEPCO system have frequencies in the 0.4 to 0.7Hz range. And the local mode causing the low frequency oscillation of generators located on the west coast area has in the frequency 0.97 and 1.25 Hz, respectively. This results can serve as a reference in the future for reliable system operation in KEPCO system.

• 대한기계학회논문집B
• /
• 제35권8호
• /
• pp.757-762
• /
• 2011

본 연구에서는 표면에 사인주기의 온도변화를 주었을 때 인체피부 조직의 온도변화에 대해 연구 하였다. 표피, 진피 및 피하조직으로 이루어진 피부 각 층의 서로 다른 물성치의 영향을 Pennes 열전달 방정식을 이용한 수치해석방법으로 풀이하여 조사하였다. 각 조직의 서로 다른 물성치가 온도분포에 미치는 영향에 대해 조사하였다. 또 물성치 변화의 영향을 많이 받는 진피부분에 대해서 관류율의 영향을 조사하였다. 해석 결과 동일한 물성치를 사용한 경우와 달리 서로 다른 물성치를 사용하였을 때, 피부깊이에 따른 온도분포가 불연속적으로 나타났다.

• 에너지공학
• /
• 제13권3호
• /
• pp.205-213
• /
• 2004

본 연구에서는 고가인 고속도 CCD카메라가 아닌 비교적 간단한 광파이버 시스템을 이용한 자려진동연소 발생에 관한 검출과, 진동연소가 발생하기 전에 이를 미리 예견할 수 있는 통계학적 수법에 관해 조사를 하였다. 먼저 자려진동연소의 발생시에 사용될 수 있는 광파이버의 유용성이 검증되었다. 광파이버에 의해 검출되어진 OH 라디칼 자발광 강도는 고속도 CCD카메라에 의해 얻어진 값과 강한 자려진동연소가 발생할 때에 거의 일치를 하였다. 자려진동연소가 발생하면 시스템과 연소기기에 손상을 가하게 된다. 이러한 피해가 발생하기 전에 자려진동연소의 발생 징후를 미리 포착하려는 시도를 하였다. 이를 위해 압력과 OH라디칼 자발광과 같은 화염에서의 변동성분께 대한 통계학적 처리를 이용하여 자려진동연소의 발생을 예견할 수 있는 독특한 수법에 관해 조사를 하였다.