• Near Infrared Analysis
• /
• v.1 no.2
• /
• pp.1-8
• /
• 2000

Using the net analyte signal, hybrid linear analysis was proposed to predict chemical concentration. In this paper, we select a sample from training set and apply orthogonal signal correction to obtain an improved pseudo unit spectrum for hybrid least analysis. using the mean spectrum of a calibration training set, we first show the calibration by hybrid least analysis is effective to the prediction of not only chemical concentrations but also physical property variables. Then, a pseudo unit spectrum from a training set is also tested with and without orthogonal signal correction. We use two data sets, one including five chemical concentrations and the other including ten physical property variables, to compare the performance of partial least squares and modified hybrid least analysis calibration methods. The results show that the hybrid least analysis with a selected training spectrum instead of well-measured pure spectrum still gives good performances, which is a little better than partial least squares.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.331-337
• /
• 2007

In this paper, we propose a novel Walsh coded training signal design and Walsh decoding method to estimate the channel response in MIMO-OFDM systems. The Walsh coded training signals are designed to have orthogonal property in time domain. Using the orthogonal property, the Walsh decoding process makes it possible to separate the desired training signal from the received signal and to estimate the channel response. The computer simulation results show that the proposed method exhibits almost the same performance as Li's original method using the optimal training sequence, even though the proposed method has much lower complexity.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.12
• /
• pp.2818-2825
• /
• 2013

In this paper, a channel estimation method by orthogonalizing of the time domain training signal in MIMO-OFDM systems is proposed. It has shown that Jeon's method[8] cannot be directly used in 4 Tx antenna MIMO-OFDM systems since the delayed Rx signals interfere the orthogonal property of the time domain training signals. As a possible solution to the problem, in this paper, a guard interval is inserted into the center of the training signals so that the orthogonal property between the Rx training signals can be maintained. It is shown by using computer simulations that the proposed method can estimate the channel response in time domain in 4 Tx antenna MIMO-OFDM systems.

• Journal of Communications and Networks
• /
• v.11 no.1
• /
• pp.42-46
• /
• 2009

Superimposed training (SIT) design for estimating of time-varying multipath channels is investigated for mobile orthogonal frequency division multiplexing (OFDM) systems. The design of optimum SIT consists of two parts: The optimal SIT sequence is derived by minimizing the channel estimates' mean square error (MSE); the optimal power allocation between training and information data is developed by maximizing the averaged signal to interference plus noise ratio (SINR) under the condition of equal powered paths. The theoretical analysis is verified by simulations. For the metric of the averaged SINR against signal to noise ratio (SNR), the theoretical result matches the simulation result perfectly. In contrast to an interpolated frequency-multiplexing training (FMT) scheme or an SIT scheme with random pilot sequence, the SIT scheme with proposed optimal sequence achieves higher SINR. The analytical solution of the optimal power allocation is demonstrated by the simulation as well.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2275-2284
• /
• 2015

In this paper, the Walsh coded orthogonal training signals for 4 × 4 multiple input multiple output-orthogonal frequency division multiplexing (MIMO-OFDM) systems are designed and the channel estimation equations are derived as a closed form, taking account of the inter training signal interference problems caused by the multi-path delayed signals. The performances of the proposed channel estimation method are analyzed and compared with the conventional methods[9,14] by using computer simulation. The simulation results show that the proposed methods has better performances, compared with the conventional methods[9,14]. As a result, the proposed method can be used for MIMO-OFDM systems with null sub-carriers.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.14 no.5
• /
• pp.30-37
• /
• 2015

The study for enhancing the data transmission rate of the next generation wireless communication system using MIMO system operating in the frequency selective fading environment is currently actively conducted. Mixed signal from each transmitted antennas are received at antennas. The training signal with orthogonal property is needed to separate the mixed signal and enable to estimate channel and time synchronization. In this paper we introduce several training sequences used in MIMO communication system and proposed the modified WeCAN sequence with good auto-correlation property in interested area. We compared auto-correlation property of each sequence via simulation and compared the performance of sequences in doppler shift and multipath fading channel.

• Journal of Communications and Networks
• /
• v.15 no.4
• /
• pp.352-361
• /
• 2013

Combining multiple-input multiple-output orthogonal frequency division multiplexing (MIMO-OFDM) with a massive number of transmit antennas (massive MIMO-OFDM) is an attractive way of increasing the spectrum efficiency or reducing the transmission energy per bit. The effectiveness of Massive MIMO-OFDM is strongly affected by the channel state information (CSI) estimation method used. The overheads of training frame transmission and CSI feedback decrease multiple access channel (MAC) efficiency and increase the CSI estimation cost at a user station (STA). This paper proposes a CSI estimation scheme that reduces the training frame length by using a novel pilot design and a novel unitary matrix feedback method. The proposed pilot design and unitary matrix feedback enable the access point (AP) to estimate the CSI of the signal space of all transmit antennas using a small number of training frames. Simulations in an IEEE 802.11n channel verify the attractive transmission performance of the proposed methods.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2006.11a
• /
• pp.175-177
• /
• 2006

This letter deals with non-pilot-aided symbol timing estimation methods in an orthogonal frequency division multiplexing (OFDM) system. To do this, OFDM system uses a frequency diversity scheme over two consecutive data symbols. Our approach can be viewed as an expansion of Schmidl's and Minn's correlation methods. Using the OFDM signal equipped with frequency diversity, however, symbol timing is accurately estimated without additional training symbol and a second-order diversity gain is achieved.

• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.892-901
• /
• 2016

In the multi-user multiple-input multiple-output (MIMO) system, orthogonal random beamforming (ORBF) scheme is proposed to serve multiple users simultaneously in order to achieve the multi-user diversity gain. The opportunistic space-division multiple access system (OSDMA-S) scheme performs multiple weighting matrices during the training phase and chooses the best weighting matrix to be used to broadcast data during the transmitting phase. The OSDMA-S scheme works better than the original ORBF by decreasing the inter-user interference during the transmitting phase. To save more time in the training phase, a partly random multiple weighting matrices selection scheme is proposed in this paper. In our proposed scheme, the Base Station does not need to use several unitary matrices to broadcast pilot symbol. Actually, only one broadcasting operation is needed. Each subscriber generates several virtual equivalent channels with a set of pre-saved unitary matrices and the channel status information gained from the broadcasting operation. The signal-to-interference and noise ratio (SINR) of each beam in each virtual equivalent channel is calculated and fed back to the base station for the weighting matrix selection and multi-user scheduling. According to the theoretical analysis, the proposed scheme relatively expands the transmitting phase and reduces the interactive complexity between the Base Station and subscribers. The asymptotic analysis and the simulation results show that the proposed scheme improves the throughput performance of the multi-user MIMO system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.4
• /
• pp.567-573
• /
• 2002

In this paper, we propose a new symbol time synchronization scheme suitable for the OFDM system with an interpolator. The proposed scheme performs the following three steps. In the first step, the coarse symbol time synchronization is achieved by continuously measuring the average power of the received envelope signal. Based on this average power, the detection possibility for the symbol time synchronization is determined. It the signal is sufficient for synchronization, we next perform a relatively accurate symbol time synchronization by measuring the correlation between a short training signal and the received envelope signal. Finally, an additional frequency synchronization is performed with a long training signal to correct symbol synchronization errors caused by the phase rotation. From the simulation results, one can see that the proposed synchronization scheme provides a good synchronization performance over frequency selective channels.