• 한국자동차공학회논문집
• /
• 제19권6호
• /
• pp.1-9
• /
• 2011

In this study, the specifications of the components of the vent vale were optimally determined in order to enhance the performance of the vent valve. Design objective was to minimize fuel leakage while satisfying the design constraints on the performance indices. To obtain the optimum solution based on real experiments, several design techniques available in PIAnO, a commercial PIDO tool, were used. First, an orthogonal array was used to generate training design points and then real experiments were performed to measure the experimental data at the training design points. Next, Kriging metamodels for the objective function and design constraints were generated using the experimental data. Finally, a genetic algorithm was employed to obtain the optimization results using the Kriging models. Fuel leakage of the optimized vent valve was found to be reduced by 95.8% compared to that of the initial one while satisfying all the design constraints.

• Journal of the Korean Data and Information Science Society
• /
• 제11권1호
• /
• pp.65-72
• /
• 2000

로버스트설계는 품질공학에서 품질특성치의 수행변동(performance variation)을 줄이는데 있다. 다구찌가 제안한 파라미터설계는 아주 많은 장점을 가지고 있으나 몇 가지 단점이 있다. 그 중에서 파라미터설계에 있어서 교차배열은 제어인자와 잡음인자의 모든 교호작용효과를 고려한 실험배치이기 때문에 많은 실험횟수를 필요로 하는 단점이 있다. 그래서 대안방법으로 Welch등(1990)이 제안한 통합배열이 고려된다. 본 논문에서는 로버스트 설계를 위한 다구찌의 파라미터설계(혹은 교차배열방법론)와 통합배열방법론을 시뮬레이션을 통하여 비교 연구하고자 한다.

• 대한기계학회논문집A
• /
• 제34권5호
• /
• pp.611-617
• /
• 2010

터빈 블레이드와 같은 시스템의 피로수명은 형상 설계변수의 변화에 따라 비선형적으로 복잡하게 나타난다. 방대한 계산시간이 요구되는 이러한 시스템의 CAE 기반 파라메트릭 설계최적화 문제에 근사기법인 크리깅 메타모델 방법이 활용되고 있다. 본 연구에서는 터빈 블레이드의 피로수명을 향상시키기 위하여, 설계변수 변화에 따른 피로수명의 비선형성을 고려함은 물론 직교성과 균형성을 모두 만족하는 다 수준 전산 실험계획법을 수행하여 크리깅 메타모델을 구축하였다. 크리깅 메타모델로부터 만족도 함수를 적용하여 피로 수명을 최적화하였고, 몬테카를로 모의실험법을 적용한 식스시그마 최적설계를 수행하여 피로수명의 결함률을 향상시킨 최적해의 강건성을 확보하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.71-74
• /
• 2001

Using the Taguchi method, optimum process condition of lead frame blanking has been determined in the point of view of shape of blanked profile. As the main process parameters, clearance, strip holding pressure and bridge width are selected. According to the orthogonal array table, three levels of experiment have been carried out for each factors. The optimal blanking condition is analyzed with the SN ratio. It has been verified that the optimal process condition can be determined with a combination of basic blanking experiment and experiment design method. Both the effect of each factors and gain can be judged in the quantitative manners from the analysis of SN ratio.

• 소성∙가공
• /
• 제11권2호
• /
• pp.132-137
• /
• 2002

Using the Taguchi method, optimum process condition of lead frame blanking has been determined in the point of view of shape of blanked profile. As the main process parameters, clearance, strip holding pressure and bridge width are selected. According to the orthogonal array table, three levels of experiment have been carried out for each factor. The optimal blanking condition is analyzed with the SN ratio. It has been verified that the optimal Process condition can be determined with a combination of basic blanking experiment and experiment design method. Both the effect of each factor and gain can be judged in the quantitative manner from the analysis of SN ratio.

• 지능정보연구
• /
• 제5권1호
• /
• pp.1-12
• /
• 1999

강건설계(robust design)는 낮은 비용으로 잡음에 강건한 고품질의 제품이나 공정을 설계하는 체계적이고 효율적인 방법이다. 그러나 강건설계의 과정 중 비표준 직교배열의 사용과 교호인자을 포함한 실험계획은 다소 복잡하고, 전문지식이 필요한 부분으로 비전문가에는 난해한 작업이다. 이를 해결하기 위하여 본 연구에서는 표준직교배열의 변형과 선점도를 이용하여 교호인자를 직교배열의 열에 자동으로 할당하는 전문가시스템 prototype을 개발하였다. 사용자가 수준별 인자수와 교호작용의 유무를 입력하면, 시스템은 적절한 직교배열을 선정하여 필요에 따라 변형하며, 제어인자와 교호작용을 직교배열표에 자동으로 할당하여 출력한다. 개발된 시스템을 사용함으로써 초보자도 직교배열을 쉽게 변형할 수 있으며 다수의 교호인자를 포함한 실험계획을 빠르게 할 수 있다. 본 연구에서 이용된 지식은 문헌에서 추출하였으며, 추론 전략으로는 규칙기반추론(rule-based reasoning)을 이용하였다.

• 대한기계학회논문집
• /
• 제17권10호
• /
• pp.2509-2517
• /
• 1993

Lapping is a very complicated and random process resulting from the variation of abrasive grains in its sizes and shapes and from the numerous factors having an effect on the process quality. Thus it needs to be analyzed by experimental method rather than by theoretical method to obtain the relative effects of factors quantitatively. In this study, cylindrical lapping experiment designed by Taguchi's L8 orthogonal array was performed and analyzed by Yates' ANOVA table. As a result, effective factors and interaction effects were identified and discussed. Also the optimal factor combination to obtain the largest improvement of surface roughness was selected and confirmatory experiments were peformed.

• 한국소음진동공학회논문집
• /
• 제16권7호
• /
• pp.720-728
• /
• 2006

A robust damage assessment technique is presented such that the location and severity of damage in structures can be identified using measured modal data. In order to identify the damage efficiently, the concept of design of experiment using orthogonal array is used for screening the main effects of each parameter which corresponds to possible damage location in FE model. Then, Taguchi method, which has been widely used for robust design in industry, is applied to parameter updating in analytical FE model. The numerical simulations of a truss structure show that damages in structure can be located from updated parameters.

• 산업경영시스템학회지
• /
• 제33권3호
• /
• pp.71-78
• /
• 2010

The end shape of tube for automobile power steering system has influence on the ability of performance. In this case study, we attempted to optimize the forming process of a small tube using Taguchi experimental design methodology. A preliminary experiment was conducted and four main control factors were selected. The experiment was set up as an $L_9(3^4)$ orthogonal array, and determined the optimal levels of the four factors through the analysis of the experimental results. As a result, the performance characteristic(close adhesion power) of the product was improved about 36%. In addition, the process capability index $C_{pk}$ is enhanced from 0.94 to 6.85.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 추계학술발표대회 논문집
• /
• pp.208-211
• /
• 2000

Processing parameters of filament winding were investigated by using design of experiment. To understand 4 main effects(fiber tension, impregnation pressure, processing rate, and temperature) and 3 interactions, $L_{27}(3^{13})$ orthogonal array table was adopted. The used materials were carbon fiber and epoxy resin. Split disk test and short-beam test, which are the general test methods for filament wound composite material, were selected as evaluation methods for a filament would part. The optimal processing parameters for the filament winding were easily found through the analysis of variance of the experimental results.