• 대한안전경영과학회지
• /
• 제6권2호
• /
• pp.251-262
• /
• 2004

There is boner process of stone manufacturing to become quality down of stone to consolidated micro crack appearance of stone surface and biotite by fire that is to be route process in stone surface by flame of LPG. And then, it is develop that stone surface process equipment by automation for the work method of boner process can be substitute work method by shotball blasting. To developement of equipment, There is to be down noise and dust. Acording to remove calamity growth hazardous substance in the work environment, there is to solve workplace avoidance factor. We have taken Taguchi's parameter design approch, specifically orthogonal array, and determined the optimal levels of stone surface through analysis of the experimental results using SIN ratio.

• 동력기계공학회지
• /
• 제19권5호
• /
• pp.25-31
• /
• 2015

This study deals with optimal conditions for design parameters of the multistage bollard with up and down installed on the street to protect pedestrians or stop cars. FE simulation and Taguchi method are used to achieve the optimization for the automatic multistage bollard to minimize effective stress caused by the external force. Thickness, height of stage 2, diameter and over-all height which affect its structural strength are chosen as design parameters. According to the experiments combined by orthogonal array, each of the effective stresses is evaluated. And the results are analyzed by using the signal to noise ratio concept of Taguchi method. From their results, the optimal combination of design parameters are proposed.

• 한국소음진동공학회논문집
• /
• 제17권4호
• /
• pp.324-332
• /
• 2007

Sensor placement method for damage identification has been developed for model updating using Taguchi method. In order to select the optimal sensor location, the analysis of variance of objective function using orthogonal array was carried out. Then, modal data at the selected locations were used for damage identification using model updating. The numerical model of a cantilever beam was used in order to compare the damage identification results with conventional sensor location method.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2010년도 춘계학술대회
• /
• pp.293-301
• /
• 2010

Wood-PP composite materials were prepared by Taguchi robust design method with L9 orthogonal array to optimize experimental conditions. Tensile strength of the composite materials was considered as the main properties. Amount of wood powder and modifier of resin were chosen as significant parameters. As the result of Taguchi analysis in this study, the amount of wood powder was the most influencing parameter on the increase of tensile strength. The optimal conditions were determined and these results were good agreement with data analyzed by Taguchi robust design method.

• 한국정밀공학회지
• /
• 제25권11호
• /
• pp.90-94
• /
• 2008

Recently, a great deal of research is focused on the printed electronics. One of their mainly concerned products is printed RFID tag. RFID technology has attracted researchers and enterprises as a promising method for automatic identification, and they are expected to replace conventional bar codes in inventory tracking and management. The key to successful RFID technology lies in developing low-cost RFID tags and the first step in applying printing technology to RFID systems is to replace antennas that are conventionally produced by etching copper or aluminum. However, due to the printing quality variations, errors, and lower conductivity, the performance of the printed RFID antennas is lower than that of antennas manufactured by conventional etching methods. In this paper, the effect of variations in the printing conditions on the antenna performance is investigated. Three levels for each condition parameter is assumed and effect on the resonant frequency are examined experimentally based on orthogonal array. The most serious factor that affects the resonant frequency of the antenna is the non-uniformity of the edge and the resonant frequency is found to be lower as the non-uniformity increases.

• 한국통신학회논문지
• /
• 제40권3호
• /
• pp.425-431
• /
• 2015

빔 공간 Multiple-Input Multiple Output(MIMO) 시스템은 단일 Radio Frequency(RF)-체인을 가지는 Electronically Steerable Parasitic Array Radiator(ESPAR) 안테나를 이용하여 다수의 데이터를 동시에 전송할 수 있는 시스템이다. 단일 안테나, 단일 RF-체인을 사용하는 ESPAR 안테나의 특성에 의해 빔 공간 MIMO 시스템은 기존 MIMO 시스템에 비해 시스템의 복잡도가 줄어들고 안테나의 소형화가 가능하다. 기존에는 빔 공간 MIMO 시스템을 사용하여 단일 반송파를 전송하는 연구만이 진행되었다. 따라서 본 논문에서는 다중 반송파를 전송하기 위해 Orthogonal Frequency Division Multiplexing(OFDM) 기반의 빔 공간 MIMO 시스템을 제안하고 성능을 분석하였다. 제안하는 빔 공간 MIMO 시스템은 기생소자의 리액턴스 값에 의해 Bit Error Rate(BER) 성능이 변화하기 때문에 최적의 성능을 가지는 리액턴스 값을 찾고, 이때의 BER 성능이 기존의 MIMO OFDM 시스템의 성능과 유사한 것을 확인하였다.

• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.5955-5962
• /
• 2014

일반적으로 고성능의 레이스카나 스포츠카 시장에서 차량의 프레임 설계는 매우 중요한 기술적 요소로 작용하고 있다. 차량의 비틀림 강성은 차량의 코너링 성능에 많은 영향을 주기 때문에 레이스 차량에 있어 우수한 성능의 프레임이라는 것은 높은 비틀림 강성을 가진다는 것을 뜻한다. 본 연구에서는 입문용 포뮬러 레이스카 프레임의 최적 비틀림 강성 설계를 위하여 다구찌 직교배열표를 가진 실험계획법과 유한요소 해석 기술을 이용하였다. 이러한 기법을 통해서 얻은 결과가 초기설계단계에서 보다 14.5%의 무게를 감량함과 동시에 무게 대비 비틀림 강성 10.7%의 개선 효과를 볼 수가 있었다. 따라서 본 연구에서는 직교배열표를 가지는 실험계획법을 이용한 구조해석이 설계 초기단계에서 저가형 레이스 차량에 사용되는 Tubular space frame 설계에 매우 유용함을 나타내고 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.134-139
• /
• 2005

This paper presents a robust design of vehicle interior noise using Taguchi method and a substructure synthesis method with a hybrid model. Firstly, the proposed method identifies the critical process of the concerned interior noise through a TPA (Transfer Path Analysis). Secondly, a strategy for a robust design is discussed, in which the major noise factor among uncertainties in the process is quality distribution of rubber bushes connecting a cradle and a trimmed body. Thirdly, a virtual test model fer the process is developed by applying a substructure synthesis method with a hybrid modeling approach. Fourthly, virtual tests are carried out according to the predefined tables of orthogonal array in Taguchi robust design process. The process was performed under 2 sub-steps. The first step is sensitivity analysis of 31 panels, and the other step is weight optimization of mass dampers on sensitive panels. Finally, two vehicles with the proposed countermeasures were validated. The proposed method reduces 87.5% of trials of measurements due to the orthogonal arrays and increases robustness by 8.6dB of S/N ratio and decreases $5\;dB(A){\sim}10\;dB(A)$ of interior noise in the concerned range of RPM.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.345-348
• /
• 2008

Metallic bipolar plate for molten carbonate fuel cell(MCFC) is composed of the shielded slot plate and the center plate. Among these, the center plate plays an important role in gas sealing. Therefore, manufacturing of the center plate is considered one of the key issues in MCFC. The center plate is manufactured by bending process. In bending process, springback and recoiling are two main problems. The aim of this article is to optimize the bending process of the center plate regardless of springback and recoiling. To achieve this goal, we proposed the punch having step to reduce springback and recoiling. Using finite element method and $L_9$ orthogonal array, we determined the main factors in the center plate bending process. And we found the optimal bending process condition for the MCFC center plate.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권1호
• /
• pp.18-23
• /
• 2006

Cutting by a high speed laser cutting machine is one of most effective technologies to improve productivity. This paper has presented the cutting characteristics and optimal cutting conditions in a high speed feeding type laser cutting machine by using Tacuchi method in the design of experiment. An L9(34) orthogonal array is adopted to study the effect of adjustment parameters. The adjustment parameters consist of cutting speed, laser power, laser output duty and assistant gas pressure. The surface roughness of sheet metal is regarded as a quality feature. Analysis of variance is performed in order to evaluate the effect of adjustment parameters on the quality feature of laser cutting process.