• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.11
• /
• pp.1080-1087
• /
• 2009

This paper presents an algorithm to acquire 3D geometric information using a virtual plane method. The method to measure 3D information on the plane is easy, because it's not concerning value on the z-axis. A plane can be made by arbitrary three points in the 3D space, so the algorithm is able to make a number of virtual planes from feature points on the target object. In this case, these geometric relations between the origin of each virtual plane and the origin of the target object coordinates should be expressed as known homogeneous matrices. To include this idea, the algorithm could induce simple matrix formula which is only concerning unknown geometric relation between the origin of target object and the origin of camera coordinates. Therefore, it's more fast and simple than other methods. For achieving the proposed method, a regular pin-hole camera model and a perspective projection matrix which is defined by a geometric relation between each coordinate system is used. In the final part of this paper, we demonstrate the techniques for a variety of applications, including measurements in industrial parts and known patches images.

• Bulletin of the Korean Mathematical Society
• /
• v.48 no.3
• /
• pp.601-609
• /
• 2011

Tensor product immersions of a given Riemannian manifold was initiated by B.-Y. Chen. In the present article we study the tensor product surfaces of two Euclidean plane curves. We show that a tensor product surface M of a plane circle $c_1$ centered at origin with an Euclidean planar curve $c_2$ has harmonic Gauss map if and only if M is a part of a plane. Further, we give necessary and sufficient conditions for a tensor product surface M of a plane circle $c_1$ centered at origin with an Euclidean planar curve $c_2$ to have pointwise 1-type Gauss map.

• Journal of the Korean Mathematical Society
• /
• v.33 no.2
• /
• pp.367-379
• /
• 1996

Let $V = {(z, y) : f(z, y) = z^n + Ay^\alpha z^p + y^\beta z^q + y^k = 0}$ and $W = {(z, y) : g(z, y) = z^n + By^\gamma z^s + y^\delta z^t + y^k = 0}$ be germs of analytic irreducible subvarieties of a polydisc near the origin in $C^2$ with n < k and (n, k) = 1 where A and B are complex numbers. Assume that V and W are topologically equivalent near the origin.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.1 no.2
• /
• pp.42-59
• /
• 1983

This article investigates the situation of the Plane Rectangular Coordinate derived from the Gauss Double Projection whereby the positioning of triangulation point in Korea has been represented on. Analyzing and assessing it have been performed by means of new computational method such as computer programing. On the basis of the results brought about, it is found that a new Plane Rectangular Coordinate as well as map projection and scale factor of geodetic length may be adapted to improve the distortion along the geodetic line on a certain zone of map projection in order to enhance the accuracy and the utility of the practical surveying works. The proposals for this study are as follows; (1) projection: Gauss-Kruger's projection (2) Coordinate system: Plane Rectangular coordinate with 8 origin system (3) Scale factor of geodetic length in origin; $m_0=0.9999$

• Archives of Plastic Surgery
• /
• v.33 no.2
• /
• pp.155-160
• /
• 2006

Although several reports have been introduced about dual plane augmentation mammaplasty, the description of periareolar approach dual plane augmentation mammaplasty was few. This article describes specific characteristics, and different classification and techniques for the periareolar dual plane breast augmentation while postoperative scars resulted from inframammary crease approach caused complaints. A total of 124 patients(248 breasts) had periareolar dual plane augmentation surgery from 1998 to 2004. Anatomic implants were used in 43 cases. Most of the patients were satisfied with the outcomes of periareolar dual plane augmentation. Periareolar dual plane augmentation mammaplasty adjusts implant and tissue relationships to ensure adequate soft-tissue coverage while optimizing implant-breast parenchymal dynamics to offer increased benefits and fewer faults compared to a single pocket location in a wide range of breast types with minimal scars. Two types of dual plane classifications are discussed in this study for the periareolar approach exclusively. The boundaries of retroglandular dissection remain constant, as the costal origin of pectoralis major are divided. Type A dual plane implies that the inferior edge of pectoralis muscle lies below the inferior areolar border, and type B dual plane implies that the inferior edge lies above the superior areolar border.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.474-478
• /
• 1992

The non-rational transfer function of a Bernoulli-Euler beam, as an important component of a flexible structure, is analyzed. The true pattern of zeros of that transfer function is investigated as a function of sensor and actuator seperation. Translational displacement sensors are used for two cases in which a force input and a moment input are seperately applied. When the displacement sensor is located at a certain point, the first pair of zeros on the real axis of the s-plane arrive at the origin and cancel the rigid-body mode. The location of the translational displacement sensors on the beamat which the rigid-body mode of the beam is unobservable is analyzed as the center of percussion and is uniquely located for each case. If sensor is moved beyond such a point, a pair of zeros appear on the imaginary axis and move away from the origin along the imaginary axis of the s-plane.

• Journal of information and communication convergence engineering
• /
• v.15 no.3
• /
• pp.137-142
• /
• 2017

A general linearly constrained narrowband adaptive array is examined in the eigenvector space. The optimum weight vector in the eigenvector space is shown to have the same performance as in the standard coordinate system, except that the input signal correlation matrix and look direction steering vector are replaced with the eigenvalue matrix and transformed steering vector. It is observed that the variation in gain factor results in the variation in the distance between the constraint plane and the origin in the translated weight vector space such that the increase in gain factor decreased the distance from the constraint plane to the origin, thus affecting the nulling performance. Simulation results showed that the general linearly constrained adaptive array performed better at an optimal gain factor compared with the conventional linearly constrained adaptive array in a coherent signal environment and the former showed similar performance as the latter in a noncoherent signal environment.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1468-1473
• /
• 2013

This paper dealt with the propagation characteristics of acoustic signals produced by partial discharges and the positioning of PD origin in insulation oil to develop insulation diagnostic techniques of oil-immerged transformers. Electrode systems such as needle to plane, plane to plane, and particle electrodes were fabricated to simulate some defects of power transformers. In addition, the frequency spectrum and propagation characteristics of acoustic signals with partial discharge (PD) in insulation oil were analyzed. Although there were differences based on the type of defect, the frequency spectra of the acoustic signals measured by wide and narrow band acoustic emission (AE) sensors were distributed in the range of 50 kHz-400 kHz. Therefore, a narrowband AE sensor is suitable for the diagnosis of oil-immersed power transformers. We could find the position of the PD source with an error margin of 10% in the experiments by calculating the position of the PD occurrence using the time difference of arrival measured by five AE sensors.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48
• /
• pp.79-95
• /
• 2003

To clarify the botanical origins of oriental medicines which have been argued or confused for plant origins, species of original plants were investigated through the textural research for oriental medicines and the comparison of Chinese, Korean, Japanese and North Korean Pharmacopoeia. Twenty oriental medicines were studied; Angelicae Gigantis Radix, Rhei Rhizoma, Atractylodis Rhizoma Alba, Aconiti Lateralis Radix Preparata, Acanthopanacis Cortex, Osterici Radix, Cnidii Rhizoma, Saposhnikovae Radix, Magnoliae Cortex, Paeoniae Radix, Liriopis Tuber, Zanthoxyli Fructus, Achyranthis Radix, Sinomeni Caulis et Rhizoma, Polygonati Rhizoma, Cinnamomi Cortex, Visci Herba et Loranthi Ramulus, Fritillariae Thunbergii Bulbus, Pogostemonis Herba, and Curcumae Longae Radix.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.545-552
• /
• 2008

Purpose: The transaxillary approach for breast augmentation has been advocated for patients and surgeons for several decades. However, this blind technique had many disadvantages including, traumatic dissection, difficult hemostasis, displacement of implants, and ill-defined asymmetrical location of inframammary crease. In the present study, the precise endoscopic electrocautery dissection was applied to eliminate the limits of blunt dissection throughout the procedures. Methods: From December 2006 to December 2007, a total of 103 patients with an average age of 29.5 years underwent endoscopic assisted transaxillary dual plane augmentation mammoplasty. The mean implant size was 243 cc with the range between 150 and 350 cc. Through a 4 cm axillary incision, electrocautery dissection for submuscular pockets was carried out under the endoscopic control. The costal origin of pectoralis muscle was completely divided to expose subcutaneous tissue and to make type I dual plane. Results: Using the endoscopic dissection, we achieved good aesthetic results including a short recovery period, less morbidity, and symmetrical well-defined inframammary crease. Type I dual plane procedure could support the consistent inframammary fold shape and be applied to most patients without breast ptosis. Minor complications did not occur, however, four major complications of capsular contracture occurred. Conclusion: In contrast to the era of the blind techniques, endoscopic assisted transaxillary dual plane breast augmentation can now be performed effectively and reproducibly. With Its advantage, the axillary application of endoscopy for augmentation mammaplasty is useful to achieve the optimal cosmetic outcomes.