• 한국시뮬레이션학회논문지
• /
• 제22권3호
• /
• pp.81-87
• /
• 2013

본 논문은 컴퓨터 해석프로그램인 SimulationX를 이용하여 굴삭기 주행모터의 내부에서 발생하는 서지압력의 저감 방법에 대하여 분석하는 연구이다. 설계민감도 해석을 통하여 설계상의 문제점을 파악하고 해결책에 접근하는 방법을 다룬다. 진행순서는 다음과 같다. 우선 현재 설계 된 주행모터에 장착된 밸브들의 동적거동을 분석하여 설계의 문제점을 찾아낸다. 그 후 많은 설계변수들 중 동적성능향상에 민감하다고 판단되는 변수를 도출하고 설계치수를 조정하여 동적성능 안정화의 경향을 살펴본다. 마지막으로 민감한 변수가 다수 일 경우 변수조합을 통해 효과적인 튜닝방법을 제안한다.

• 대한안전경영과학회지
• /
• 제8권4호
• /
• pp.91-107
• /
• 2006

본 논문은 Contour Crafting(CC) 프로세스의 압출과 적층 단계에서 물질 흐름의 형태를 연구하기 위한 실험과 모델링을 보여준다. 특히, 실험재료로써 진흙을 이용한 압출과 적층 메커니즘을 이해하기 위하여 기초적인 유한성분분석(FEA)을 실행하였다. FEA 시뮬레이션을 이용한, CC의 성능에 있어서 압출구멍의 기하학적인 효과에 대한 분명하고 기본적인 이해를 하게 되었다. 네모난 형상이 원하는 외부 표면특성을 만드는 것뿐만 아니라, 그리고 층간에 최적의 융합을 수행하는데 있어서 가장 적합하다는 것을 알아냈다. 우리의 실험은 이 결과들을 증명한다.

• Journal of Periodontal and Implant Science
• /
• 제29권1호
• /
• pp.65-80
• /
• 1999

The purpose of this study was to evaluate the effects of periodontal curet and various rotating instruments on the root surfaces. Thirty-five extracted teeth with advanced periodontal disease were used. They was root planed with periodontal curet, periodontal Perio-Clean bur, periodontal Roto-Perio bur, resin polishing ET bur, and resin polishing diamond fissure bur. To find dentinal tubule orifices on the root surface, tetracycline HCI solution was applied to the one tooth of treated each group. Then, root surfaces were investigated using scanning electron microscope. Amount of loss of cementum was evaluated by loss of tooth substance index. The results were as follows. 1. Groups treated with periodontal curet and Perio-Clean bur showed irregular surface and concavities. Concavities seemed to be lacunae of cementocyte. Other groups treated with Roto-Perio bur, resin polishing ET bur, and resin polishing diamond fissure bur showed partially opened dentinal tubule orifice. 2. Groups treated with periodontal curet and Perio-Clean bur and tetracycline HCl showed irregular surface. No dentinal tubule orifice was seen. Other groups treated with Roto-Perio bur, resin polishing ET bur, and resin polishing diamond fissure bur and tetracycline HCl showed dentinal tubule orifice with various shape and size. 3. Loss of tooth substance indices were compared between groups. There was no statistically difference between periodontal curet and Perio-Clean bur groups. There were statistically differences between periodontal curet and Roto-Perio bur, ET bur, and diamond fissure bur groups. As a result of this study, groups treated with Roto-Perio bur, resin polishing ET bur, and resin polishing diamond fissure bur showed more cementum removed than groups treated with periodontal curet and Perio-Clean bur. Therefore, in a conventional treatment for periodontal disease, it was recommended that periodontal curet or Perio-Clean bur should be used. In a treatment for regeneration of periodontal tissue, it was recommended that Roto-Perio bur, resin polishing ET bur, or resin polishing diamond fissure bur should be used

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.789-794
• /
• 2000

The Paper studies the flow and heat transfer characteristics to a jet impinging at different oblique angles, to a plane surface by numerical methods. The flowfield and heat transfer rate associated with the oblique Impingement of an axisymmetric jet are of interest as a result of its presence in numerous technological Problems. For the computation of heat transfer rate, the standard ${\kappa}-{\varepsilon}$ and ${\kappa}-{\varepsilon}-\bar {{\upsilon}'^ 2}$ turbulent model were adapted. The accuracy of the numerical calculations was compared with various experimental data reported in the literature. ${\kappa}-{\varepsilon}-\bar {{\upsilon}'^ 2}$ model showed better agreement with experimental data than standard ${\kappa}-{\varepsilon}$ model in prediction of the turbulent intensity and the heat transfer rate. In the case of computation of flowfield, the study carries on the ${\alpha}=45$ deg, h/D=4.95. The jet Reynolds number based on the nozzle diameter(D), was 48,000. For the computation of heat transfer rate, the Re=20,000, the jet orifice-to-plate spacings(L/D) are 4, 6 and 10, and the angle between the axis of the jet orifice and the plate surface is set at 30, 45, 60, or 90 deg. For the smaller spacings, the near-peak Nusselt numbers are not significantly effected by the initial decreases in the Jet angle. The overall shape of the local Nusselt number x-axis profile is influenced by both the jet orifice-to-plate spacing and the jet angle.

• Journal of Periodontal and Implant Science
• /
• 제27권1호
• /
• pp.191-203
• /
• 1997

Recently, alteration on chemical treatment on the root and removal of pathologic bacteria, which is the main reason for periodontal disease, by complete removal of infected cementum layer was been emphasied In this study, teeth extracted due to periodontal disease were root planed using periodontal curette and roto bur. Then they were treated with different concentration of Tetracycline HCI at different time. The state of root surface and change in the pre and post treatment was observed. The results were as follows. 1. The group treatment with periodontal curette and saline showed remaining plaque, debris and irregular surface and no dentianl tubule orifice could be seen. 2. The group treatment with periodontal curette and tetracycline HCI showed process compoed with decacified material and there was concanity seemed to be a lacunae of cementocyte. 3. The group treatment with roto bur and saline, there was no remaning plaque and partial dentinal tubule orifice could be seen but smear layer covering them.4. The group treatment with roto bur and tetracycline HCI showed various shape and size dentinal tubule orifice could be seen. From the results, roto bur showed cleaner surfaces than treatment with periodontal curette. But still smear layer existed. Thus for regeneration of periodontal tissue, chemical treatment using tetracycline HCI should follow roto bur treatment. And it is considered that the treatment time is more important than the concentration of tetracycline HCl.

• 한국추진공학회지
• /
• 제8권2호
• /
• pp.1-9
• /
• 2004

산화제 매니폴드 내부유동의 물리적 특성을 파악하기 위해. CAE 기법을 이용한 수치 해석적 연구를 수행하였다. 유동장의 물리적 특성을 충분히 해상해 내면서도, 유동해석의 계산비용을 절감하기 위한 방안으로 분사공에 대한 모델링 작업을 시도하였으며, 대규모 유동패턴을 정확히 예측해 내면서도 약 30%의 계산 비용의 절감을 얻을 수 있었다. 예분산판이 장착되지 않은 경우, 압력과 유량의 분포가 분사공 윗면에서 상당히 불균일하게 나타났는데, 이는 매니폴드 내에 존재하는 두 개의 대규모 유동 패턴에 기인한 것으로 생각된다.

• 대한기계학회논문집
• /
• 제11권5호
• /
• pp.810-818
• /
• 1987

본 연구에서는 이러한 개념을 바탕으로 오리피스 내의 국소 압력강하치의 통 계적 해석을 통한 유동양식의 판별을 시도하였다. 수평관내 물과 공기를 매질로 2상 유동을 형성하여 각 유동양식에 따른 압력강하치의 확률밀도함수를 구하였으며 순간압 력강하의 통계치를 분석하였다.본 연구에서 다룬 유동양식은 기포유동, 플러그(pl- ug)유동, 슬러그(slug)유동, 성층(stratified)유동 등이며 천이영역에 대한 실험자료 도 포함하였다. 끝으로 이러한 유동양식 판별법을 사용하여 유동선도를 완성하였으 며 다른 선도와 비교분석하였다.

• Restorative Dentistry and Endodontics
• /
• 제43권2호
• /
• pp.15.1-15.7
• /
• 2018

Objectives: The present study aimed to evaluate the shaping ability of 2 thermally treated nickel-titanium reciprocating systems in simulated curved canals. Materials and Methods: Forty simulated canals were prepared to apical size 25 using Reciproc Blue R25 (VDW) and WaveOne Gold Primary (Dentsply Sirona) instruments. Standard pre- and post-preparation images were taken and superimposed. The removal of resin material was measured at 5 standard points: the canal orifice, halfway between the canal orifice and the beginning of the curve, the beginning of the curve, the apex of the curve, and the end-point of the simulated canal. The data were analysed using the independent sample t-test with a 5% significance threshold. Results: The canals in which Reciproc Blue R25 was used showed a significantly greater widening than those in which WaveOne Gold was used at 4 of the 5 measurement points (p < 0.05). The Reciproc Blue R25 instrument removed significantly more resin from the inner aspect of the curve at 2 of the 5 points and similar amounts at the remaining 3 points. At the 2 apical points, there was no significant difference between the Reciproc Blue R25 and WaveOne Gold Primary instruments. Conclusion: Both instruments respected the original canal anatomy; however, WaveOne Gold resulted in a more conservative shape with less transportation.

• Design & Manufacturing
• /
• 제9권2호
• /
• pp.25-29
• /
• 2015

This paper presented characterization of spray velocity and angle of spray nozzle systems for cosmetic products. Diameter and length of nozzle orifice were chosen as shape factors of the spray system. Spray orifice of the spray pattern is a factor influencing the quality of the product. Fluid analysis was conducted by using "Fluent" to obtain spray angle and velocity. RSM (Response Surface Method) was used to approximate the relationship between these 2 factors and spray characteristics. To evaluate the proposed method, experimental work with existing was conducted and good agreement between simulation and experimental results.

• 수산해양기술연구
• /
• 제22권1호
• /
• pp.41-48
• /
• 1986

Ifis recommended that the injection rate should be accurate and reliable in the input data of the performance simulation in diesel engine. Matsuoka Sin improved W. Bosch's injection ratio measurement system. Matsuoka Sin reduced length of the test pipe and set the orifice. However, it was not measured accurately to measure the injection ratio due to reflection wave. In the present thesis, the improved measurement system with combination of the conventional W. Bosch type injection ratio measurement system and Matsuoka Sin type corrected W. Bosch type was practically made. The location of orifice and throttle valve was modified and set one more back pressure valve in order to reduce the effect of reflection wave. The results according to injection condition of multi-hole nozzle are following: 1. Measurement error of injection ratio measurement system in this thesis was $\pm$ 1 %, therefore, its reliability was good. 2. The form of injetion ratio is changed from trapezoidal shape to triangle shape with increase of revolution per minute when injection amount is constant. 3. In the case of constant rpm, the initial injection ratio is almost constant regardless of the amount, meanwhile the injection period becomes longer with increase of the amount. 4. The injection pressure of nozzle isn't largely influenced with injection ratio in the case of constant injection amount and rpm, otherwise the initial injection amount is increased by 3-4% when the injection pressure is low. 5. The injection ratio isn't nearly influenced with back pressure.