• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1331-1337
• /
• 2003

Linearized equations of motion for the vibration analysis of rotating cantilever plates with arbitrary orientation angle are derived in the present work. Two in-plane stretch variables are introduced to be approximated. The use of the two in-plane stretch variables enables one to derive the equations of motion which include proper motion-induced stiffness variation terms. The equations of motion are transformed into dimensionless forms in which dimensionless parameters are identified. The effects of the dimensionless parameters on the modal characteristics of rotating cantilever plates are investigated through numerical study. The natural frequency loci veering along with the associated mode shape variations, which occur while the rotating speed increases, are also presented and discussed.

• 한국생산제조학회지
• /
• 제20권2호
• /
• pp.202-206
• /
• 2011

Works on the strength and stiffness in the structural members are carried out widely with various material and cross-sections with ever increasing safety concerns, they are presently applied in various fields including railroad trains, air crafts and automobiles. In addition to this, problem of lighting structural members became important subject by control of exhaust gas emission, fuel economy and energy efficiency. So, Light weight of member structures is necessary for the high performance and various functions. In this study, the CFRP flat and circular member was manufactured by CFRP prepreg sheet in autoclave. Carbon FRP is an anisotropy material whose mechanical properties change with its fiber orientation angle, so this study apply to the effects of the fiber orientation angle on the bending characteristics of the member. Each CFRP flat and circle are compared by strength and stiffness.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.53-56
• /
• 2000

Langmuir-Blodgett(LB) technique is the best candidate for the future molecular electronic devices. But, these molecular thin film devices require the bulk properties that are influenced by the molecular orientations. So, this is of current interest in molecular electronic device fabrications of new materials. In this study, quantitative evaluation of molecular orientation in LB films of PAAS was performed by comparing the absorption intensities of the FT-IR transmission and reflection-absorption spectra and the polarized UV/visible absorption spectra. It was found that the polar angle( $\theta$ ) of the dipole moment is about 68$^{\circ}$ and the tilting angle of the alkyl chain is about 11.5$^{\circ}$

• 한국산학기술학회논문지
• /
• 제13권8호
• /
• pp.3513-3520
• /
• 2012

본 연구는 뇌졸중 환자와 정상 성인이 앉은 자세에서 동적으로 변화하는 지지면의 각도에 적응하여 신체를 정위시키는 능력에 차이가 있는지 알아보기 위해 실시되었다. 뇌졸중 환자 12명(남 6명, 여 6명)과 정상 성인 12명(남 6명, 여 6명)을 대상으로 실시하였고, 앉은 자세에서 지지면을 2가지 방향(우세측, 비우세측)으로 기울였을 때 수직선과 머리와 체간이 이루는 각도를 영상 동작 분석 시스템을 이용하여 측정하였다. 앉은 자세에서 우세한 쪽을 올렸을 때 뇌졸중 환자와 정상 성인의 사이의 머리와 체간의 각도는 유의한 차이를 보였다(p<0.05). 앉은 자세에서 비우세한 쪽을 올렸을 때 뇌졸중 환자와 정상 성인 사이의 머리와 체간의 각도는 유의한 차이를 보였다(p<0.05). 앉은 자세에서 비우세한 쪽을 내렸을 때 뇌졸중 환자와 정상 성인 사이의 머리와 체간의 각도는 유의한 차이를 보였다(p<0.05). 앉은 자세에서 우세한 쪽을 내렸을 때 뇌졸중 환자와 정상 성인 사이의 머리의 각도는 유의한 차이를 보였으나(p<0.05) 체간의 각도는 유의한 차이를 보이지 않았다(p>0.05). 본 연구의 결과, 뇌졸중 환자들이 정상 성인에 비해 동적으로 변화하는 지지면의 각도에 적응하여 신체를 정위시키는 능력에 있어서 다양한 결손이 있음을 확인하였다. 뇌졸중 환자가 앉은 자세에서 환경의 변화에 적응하여 신체를 정위시키는 능력의 분석을 통해 뇌졸중 환자의 앉은 자세 조절의 문제점을 좀 더 명확히 이해할 수 있을 것으로 여겨진다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.436-439
• /
• 2003

FRP has been used widely for insulator. FRP consists of fiber and resin. The fiber contributes the high strength and modulus to the composite. The fiber orientation in FRP has a great effect on the strength of FRP because the strength of FRP mainly depends on the strength of fiber. In this study, FRP was made unidirectionally by pultrusion method. Outer part of the FRP was made by filament winding method to give fiber orientation to the FRP. And outer part of FRP was also made by wrapping method. The bending strength and bending stresses of FRP rods were simulated according to the winding orientation of glass fiber. The bending strength of FRP was also evaluated. The results of simulation and evaluation were compared each other to investigate main stresses which affect the fracture of FRP. The main stresses which had a great effect on the strength of FRP were shear stresses. Bending strength of the FRP was different with the winding angle. The bending strength of $15^{\circ}$ winded FRP was the highest.

• Macromolecular Research
• /
• 제14권5호
• /
• pp.499-503
• /
• 2006

This report presents a new technical approach for evaluating the fiber orientation of composites using small-angle light scattering (SALS). Glass fiber (GF)/polypropylene (PP) composites with different fiber orientations were prepared by drawing compression-molded specimens. The drawn samples were remelted and then annealed at $150^{\circ}C$ in order to induce a crystalline structure on the fiber surface, and then underwent SALS analysis. The samples showed a combination of circular and streak patterns. The model calculations demonstrated that the number of nuclei on the fiber surface and the thickness of the transcrystalline layer affected the sharpness and intensity of the streak pattern. In addition, the azimuthal angle of the streak pattern was found to be dependent on the direction of the transcrystalline layer, which correlated with the fiber direction. This correlation suggests that the fiber orientation in the composites can be easily evaluated using SALS.

• 한국정밀공학회지
• /
• 제14권4호
• /
• pp.119-125
• /
• 1997

The drilling experiment of carbon fiber epoxy composite material with WC-drill has been done under the various cutting conditions in order to minimize the problems occurred in the material while being drilled. It has been confirmed by a frequency analysis of the cutting force signals that the variation of cutting force resulted from the periodic variation of the angle between the ortating drill and the stacking angle of the carbon fiber. By the drilling experiment with several drills having different point angles, the drilling char- acteristics, which show the relations between the change in the point angle and cutting force or external surface condition, were analyzed.

• Applied Science and Convergence Technology
• /
• 제24권5호
• /
• pp.151-155
• /
• 2015

The interfacial electronic structure between zinc phthalocyanine (ZnPc) and aluminumdoped zinc oxide (AZO) substrates has been evaluated by ultraviolet photoemission spectroscopy and angle-dependent x-ray absorption spectroscopy to understanding the molecular orientation of a ZnPc layer on the performance of small molecule organic photovoltaics (OPVs). We find that the ZnPc tilt angle improves the ${\pi}-{\pi}$ interaction on the AZO substrate, thus leading to an improved short-circuit current in OPVs based on phthalocyanine. Furthermore, the molecular orientation-dependent energy level alignment has been analyzed in detail using ultraviolet photoemission spectroscopy. We also obtained complete energy level diagrams of ZnPc/AZO and ZnPc/indium thin oxide.

• Composites Research
• /
• 제28권1호
• /
• pp.1-5
• /
• 2015

In this paper the influence of fiber orientation of basalt and carbon inter-ply fabrics on the flexural properties of hybrid composite laminates was experimentally investigated. Four types of basalt/carbon/epoxy inter-ply hybrid composite laminates with varying angle ply orientation of reinforced basalt fiber and fixed orientation of carbon fiber were fabricated using hand lay-up technique. Three point bending test was performed according to ASTM 7264. The fracture surface analysis was carried out by scanning electron microscope (SEM). The results obtained from the four laminates were compared. Lay-up pattern of $[0B/+30B/-30B/0C]_S$ exhibits the best properties in terms of flexural strength and flexural modulus. Scanning electron microscopy results on the fracture surface showed that the interfacial de-bonding between the fibers and epoxy resin is a dominant fracture mode for all fiber lay-up schemes.

• The Korean Journal of Ecology
• /
• 제8권2호
• /
• pp.99-107
• /
• 1985

Photosynthetically Active Radiation (PAR) affects the growth of plants as well as their photosynthetic rates. A mathematical model for intercepted solar radiation on the tilted leaf with any azimuth angle was established and the leaf orientation in which receives the maximum solar radiation was determined each month, during the growing season, and for an year. PAR was maximized at the leaf elevation of 50。~60。 in the winter, at that of 20。~40。. On the whole the leaves of tilt angle 0。~40。 received much radiation comparing with those of other tilt angles. The theoretical tendencies were compared with the distribution of leaf orientation measused practically. The average leaf elevation of maple tree was 17.0。$\pm$12.0。, and that of ginkgo was 29.8。$\pm$16.0。. Several results from other literatures support our suggestion that cumulative effevct of the relationships between surface normal vector and a vector pointing in the direction of the radiation determine the leaf orientation.