• 한국정밀공학회지
• /
• 제31권11호
• /
• pp.993-998
• /
• 2014

Silver (Ag) grid patterned PET substrates were manufactured by thermal roll-imprinting methods. We coated highly conductive layer (HCL) as a supply electrode on the Ag grid patterned PET in the three kinds of conditions. One was no-HCL without conductive PEDOT:PSS on the Ag grid patterned PET substrate, another was thin-HCL coated with ~50 nm thickness of conductive PEDOT:PSS on the Ag grid PET, and the other was thick-HCL coated with ~95 nm thickness of conductive PEDOT:PSS. These three HCLs in order showed 73.8%, 71.9%, and 64.7% each in transmittance, while indicating $3.84{\Omega}/{\Box}$, $3.29{\Omega}/{\Box}$, and $2.65{\Omega}/{\Box}$ each in sheet resistance. Fabrication of organic solar cells (OSCs) with HCL Ag grid patterned PET substrates showed high power conversion efficiency (PCE) on the thin-HCL device. The thick-HCL device decreased efficiency due to low open circuit voltage ($V_{OC}$). And the Ag grid pattern device without HCL had the lowest energy efficiency caused by quite low short current density ($J_{SC}$).

• 마이크로전자및패키징학회지
• /
• 제14권1호
• /
• pp.27-31
• /
• 2007

휨성 유기박막트랜지스터(organic thin film transistor, OTFT)를 제작하기 위하여 게이트 절연막으로 PVP(poly-4-vinylphenol) 유기막을 이용하여 MIM (metal-insulator-metal) 구조의 캐패시터 소자를 제작하였다. 유기 절연층의 형성은 Al/PES (polyethersulfone) 기판과 ITO/Glass 기판 위에 PVP를 용질로, PGMEA(propylene glycol monomethyl ether acetate)를 용매로 사용하였다 또한 열경화성 수지인 poly(melamine-co-(ormaldehyde)를 사용하여 cross-linked PVP 절연막을 합성하여 스핀코팅법으로 소자를 형성하였다. 제작된 소자에 대해 절연막 두께와 기판 종류에 따른 전기적 특성을 조사한 결과 Al/PES 기판을 사용하였을때 누설전류는 1.3 nA로 ITO/glass 기판을 사용했을때의 27.5 nA보다 크게 개선되었다. 또한 제작된 모든 캐패시터 소자의 정전용량은 $1.0{\sim}1.2nF/cm^2$ 범위로 나타났으며 계산값과 매우 유사한 결과를 얻을 수 있었다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권4호
• /
• pp.161-168
• /
• 2001

Organic thin film transitors(TFTs) are of interest for use in broad area electronic applications. For example, in active matrix liquid crystal displays(AMLCDs), organic TFTs would allow the use of inexpensive, light-weight, flexible, and mechanically rugged plastic substrates as an alternative to the glass substrates needed for commonly used hydrogenated amorphous silicon(a-Si:H). Recently pentacene TFTs with carrier field effect, mobility as large as 2 $cm^2V^{-1}s^{-1}$ have been reported for TFTs fabricated on silicon substrates, and it is higher than that of a-Si:H. But these TFTs are fabricated on silicon wafer and $SiO_2$ was used as a gate insulator. $SiO_2$ deposition process requires a high insulator which is polyimide and photo acryl. We investigated trasfer and output characteristics of the thin film transistors having active layer of pentacene. We calculated field effect mobility and on/off ratio from transfer characteristics of pentacene thin film transistor, and measured IR absorption spectrum of polymide used as the gate dielectric layer. It was found that using the photo acryl as a gate insulator, threshold voltage decreased from -12.5 V to -7 V, field effect mobility increased from 0.012 $cm^2V^{-1}s^{-1}$ to 0.039 $cm^2V^{-1}s^{-1}$ , and on/off current ratio increased from $10^5\;to\;10^6$. It seems that TFTs using photo acryl gate insulator is apt to form channel than TFTs using polyimide gate insulator.

• Journal of Information Display
• /
• 제2권2호
• /
• pp.52-60
• /
• 2001

The electrical and mechanical properties in indium-tin-oxide films deposited on polymer substrate were examined. The materials of substrates were polyethersulfone (PES) which have gas barrier layer and anti-glare coating for plastic-based devices. The experiments were performed by rf-magnetron sputtering using a special instrument and buffer layers. Therefore, we obtained a very flat polymer substrate deposited ITO film and investigated the effects of buffer layers, and the instrument. Moreover, the influences of an oxygen partial pressure and post-deposition annealing in ITO films deposited on polymer substrates were clarified. X-ray diffraction observation, measurement of electrical property, and optical microscope observation were performed for the investigation of micro-structure and electro-mechanical properties, and they indicated that as-deposited ITO thin films are amorphous and become quasi-crystalline after adjusting oxygen partial pressure and thermal annealing above $180^{\circ}C$. As a result, we obtained 20-25 ${\Omega}/sq$ of ITO films with good transmittance (above 80 %) of oxygen contents with under 0.2 % and vacuum annealing. Furthermore, using organic buffer layer, we obtained ITO films which have a rather high electrical resistance (40-45 ${\Omega}/sq$) but have improved optical (more than 85 %) and mechanical characteristics compared to the counterparts. Consequently, a prototype reflective color plastic film LCD was fabricated using the PES polymer substrates to confirm whether the ITO films could be realized in accordance with our experimental results.

• 한국전기전자재료학회논문지
• /
• 제22권11호
• /
• pp.961-968
• /
• 2009

In this work, transparent conductive oxide(TCO) films such as $In_2O_3-SnO_2$(ITO) and $In_2O_3-ZnO$(IZO) were prepared on polyethylene naphthalene(PEN) and glass substrates by using rf-magnetron sputtering system. The TCO films deposited on PEN substrate show very poor conductivity as compared to that of the TCO films deposited on glass substrates. From the results of the residual gas analysis(RGA) test, this poor stability of plastic substrate is presumed to be caused by the deteriorated adhesion between the TCO films and the plastic substrate due to outgassing from the plastic substrate during deposition of TCO films. From our experiment, it is found that the vaporization of some defects in the plastic substrates deteriorate the adhesion of the TCO films to the plastic substrate, because the most plastic substrates containing the water vapor and/or other adsorbed particles such as organic solvents. Mixing of these gases vaporized in the sputtering process will also affect the electrical property of the deposited TCO films. Inorganic thin composite $(SiO_2)_{40}(ZnO)_{60}$ film as a gas barrier layer is coated on the PEN substrate to protecting the diffusion of vapors from the substrate, so that the TCO films with an improved quality can be obtained.

• 대한화학회지
• /
• 제13권3호
• /
• pp.233-240
• /
• 1969

The synthesis is described of new pepsin substrates of benzyloxycarbonyl-glycyl-L-tyrosyl-L-phenylalanyl-glycine ethyl ester and benzyloxycarbonyl-glycyl-L-tyrosyl-L-phenylalanyl-glycine for studies on the specificity of pepsin, and thin layer chromatographic examination of the peptides prepared showed the new substrates are homogeneous and also, same examination of the incubation mixtures showed that two synthetic substrates are cleaved by pepsin at the L-tyrosyl-L-phenylalanyl bond and hydrolysis of these substrates by pepsin is achieved without transpeptidation. It is found that synthetic peptides are moderately soluble with the amount of the substrate up to a concentration of 0.7 mM in aqueous sodium citrate buffers (0.04 M) in the pH range 1.8-4.0, thus obviating the necessity for the adding of an organic solvent in the assay mixture. The kinetic parameters for synthetic substrates are tabulated in the following table. The data in the table indicate that the susceptibility of synthetic peptides to peptic hydrolysis are relatively large and the change of the carboxyl-terminal group of synthetic substrate from glycine ethyl ester to glycine causes a small decrease in the susceptibility of the L-tyrosyl-L-phenylalanyl bond.

• 유기물자원화
• /
• 제2권2호
• /
• pp.31-37
• /
• 1994

퇴비화 과정의 미생물학적 연구를 위해 퇴비화 재료인 유기성 폐기물에 많이 존재하는 고분자 물질의 분해에 관여하는 미생물들과 이들이 분비하는 효소들을 손쉽게 선별, 정량하는 방법을 개발하였고 아울러 혐기적 상태에서의 퇴비화 가능성을 탐색하는 연구의 일환으로 혐기적 분해의 최종적 역할을 하는 황산 환원 균의 퇴비화 과정에서의 분포를 알아보았다. 고분자 물질의 분해 측정법 개발에 사용된 기질은 각각 다당류 및 단백질 중에서 ${\beta}-glucan$, xylan, dextran, CMC(carboxymethylcellulose), casein, collagen 등을 재료로 사용하였고 이들을 가교제를 써서 불용화시키고 색소를 결합시켜 색소기질을 제조하였다. 제조된 기질을 이용하여 실제의 퇴비에서 고분자 분해 세균을 분리할 수 있었으며 기존의 효소 정량법에 비해 민감하게 효소 활성을 정량할 수 있었다. xylan과 ${\beta}-glucan$ 색소기질의 경우 고체 배지 상에서 고분자 분해 미생물을 선별할 때 기존의 Congo red 법과는 달리 미생물 집락에 손상을 입히지 않고도 손쉽게 사용할 수 있었다. 실험에 쓰인 오니에 포함되어 있는 황산 환원 세균은 lactic acid, propionic acid, butyric acid, formic acid 등의 유기산에 대해 높은 활성을 보여 주었고, acetic acid, valeric acid도 이용할 수 있었다.

• 원예과학기술지
• /
• 제19권2호
• /
• pp.179-185
• /
• 2001

원예용 배지의 물리화학적 특성을 파악하기 위해 전세계적으로 다양한 분석 방법이 사용되고 있다. 유럽은 배지 분석방법의 표준화 연구를 지속적으로 수행해왔다. 유럽표준화 위원회에서는 유럽표준방법으로 CEN methods를 최종안까지 제출하였으며 사실상 유럽표준 배지분석방법의 제정을 확립하는 단계에 있다. 물리적 특성 중 건물함량과 수분함량은 건조 후 분석하였고, 실험 가밀도는 일정한 부피에 채워진 시료의 무게로 측정하였다. 가밀도, 진밀도, 공극률, 액상, 기상, 부피 감소율은 double ring과 sand suction table이라는 장치를 사용하여 배지를 포화, 배수시킨 후 건조시켜 분석하였다. 화학적 특성 중 pH와 EC는 부피 기준 1:5로 침출하여 분석하였다. 유기물과 회분함량은 건조와 연소 과정을 통해 분석하였다. CEN methods는 유럽표준방법으로 확립을 앞두고 있으나 더 지속적인 연구가 필요할 것이다.

• 생태와환경
• /
• 제35권4호통권100호
• /
• pp.295-305
• /
• 2002

1996년 4월부터 1998년 3월까지 서울의 한강지류 3차 하천인 양재천 200m구간에서 저서성 대형 무척추동물을 채집하였다. 유기물 오염으로 인해 종풍부도가 상대적으로 낮았지만 군집 풍부도양상은 조사지점에 따라 다르게 나타났다. 유속이 높고 큰 하상구성물이 많은 직류부 조사지점에서는 종풍부도가 높았고 유기물오염에 상대적으로 내성이 낮은 종들이 추가적으로 출현하였다. 반대로 유속이 느리고 퇴적이 많이 이루어진 소(pool)에 위치한 조사지점에서는, 종풍부도는 낮았고, 유기오염물에 내성이 강한 수종이 많이 채집되었다. 중요요인분석에서 직류부의 조사지점은 유속, 마찰유속(shear velocity)과 관련성이 있었고, 유기물오염에 내성이 비교적 낮은 다양한 종들과 연관성을 나타냈다. 특히 큰 하상구성물을 심은 지점은 하상구성물의 다양도나 조도(roughness)와같은 수리학적 (hydraulics)특징과 관련되었고, 하천의 부분적 회복을 나타내는 종들과 관계가 있었다. 소에 위치하는 조사지점은 하상구성물에 퇴적한 유기물과 유기물오염에 내성이 강한 빈모류나 깔따구류와 연관을 나타내었다.

• Ocean and Polar Research
• /
• 제30권4호
• /
• pp.509-518
• /
• 2008

Distribution of bacterial abundance and production was investigated in seawater around Saemangeum dike 7 times during March, $2007{\sim}July$, 2008. In the inner area of the dike, salinity variation was great due to river runoff from Mangyung and Dongjin Rivers and high chlorophyll a (chl a) concentrations up to $124.3{\mu}g\;l^{-1}$ was found. In the outer area of the dike, salinity was higher than in the inner area of the dike, and chl a was lower up to 10 times than in the inner area of the dike. Thus, the area of Saemangeum showed meso- to hypereutrophic conditions. Bacterial abundance and production ranged from 0.3 to $4.3{\times}10^9\;cells\;l^{-1}$ and from 5.2 to $570 pmol\;l^{-1}h^{-1}$ in outer area of the dike, respectively, while in the inner area of the dike bacterial abundance and production was 3 to 4 times higher ($0.4{\sim}12.7{\times}10^9\;cells\;l^{-1}$ and $12.3{\sim}1309\;pmol\;l^{-1}h^{-1}$, respectively) than those in the outer area. In both areas, bacterial abudance and production was highest in summer and lowest in winter. However, the variations of bacterial parameters was very large in each season. These large variations seemed to be related with the supply of organic matter. Bacterial abundance and production showed significant negative correlations with salinity in the inner area, suggesting that allochthonous organic matter input by river runoff could be an important factor in regulating the distribution of bacterial abundance and production. In addition, bacterial production also correlated positively with chl a in the inner area, suggesting that autochthonous substrate might be another regulating factor of bacterial growth in the area. These results suggest that the supply of both allochthonous organic substrates introduced by river runoff and autochthonous substrates produced by phytoplankon could be important in regulating bacterial growth and utilization of organic matter in the area. Thus, to manage water quality in the inner area of dike, it seems to be important to lower the load of both organic and inorganic nutrients from adjacent rivers.