• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.3
• /
• pp.154-159
• /
• 2006

It is essential to understand the decomposition characteristics for developing the optimum anaerobic digestion system of organic wastes. In this study, BMP (Biochemical Methane Potential) test using serum bottle was conducted to evaluate the anaerobic degradability of fish offal. 3 different groups of fish offal including waste from mackerel and hairtail handling except viscera and fish viscera were chosen for the substrates. Grinded fish offal was transferred anaerobically to serum bottle in amounts of 50 ml, 100 ml and 150 ml, respectively. BMP test was carried out in triplicate. Cumulative methane production and methane production rate depending on incubation time were evaluated. These results varied depending on substrate characteristics. The average values of ultimate methane yield ranged between $420ml{\cdot}CH_4/g{\cdot}VS$ and $490ml{\cdot}CH_4/g{\cdot}VS$, and the methane production and degradation rate of viscera were higher than those of other parts of fish offal. According to the analysis of elemental composition, average C/N ratio of fish offal used in this study was 5.2. Theoretical ultimate methane yield calculated from elemental composition was $522ml{\cdot}CH_4/g{\cdot}VS$. Biodegradability was calculated as 0.847.

• Progress in Superconductivity
• /
• v.8 no.1
• /
• pp.65-70
• /
• 2006

We fabricated $YBa_2Cu_33O_{7-x}$(YBCO) films on(00l) $LaAlO_3$ substrates prepared by metal organic deposition(MOD) method using trifluoroacetate(TFA) solution and evaluated the effects of the humidity on the microstructure, phase purity, and critical properties. The films calcined at $430^{\circ}C$ were fired at $775^{\circ}C$ at 0%, 4.2%, 12.1%, and 20.0% humidified As gas mixed with 0.1% $O_2$. We observed that the amount of $BaF_2$ phase was effectively reduced and that a sharp and strong biaxial texture formed under a humidified atmosphere, leading to increased critical properties. For the films fired at 0% humidity, the $T_c\;and\;I_c$ were undetectably small. When the humidity was increased to 4.2%, the corresponding $T_c$(onset) and $I_c$ were increased to 90.5 K and 8 A/cm-width, respectively. For the films at the humidity range of 12.1-20.0%, the $I_c$ was found to be 35 A/cm-width. According to the results of the XRD, pole-figure, and SEM, these improved critical properties are probably attributed to the formation of a purer YBCO phase, larger grain size, and stronger c-axis orientation.

• Applied Chemistry for Engineering
• /
• v.17 no.6
• /
• pp.591-596
• /
• 2006

Topology and molecular ordering of NPD(4,4'-bis-[N-(1-naphthyl)-N-phenyl-amino]biphenyl) thin films deposited under magnetic field with post-deposition annealing were investigated. NPD was deposited onto ITO glass substrates via thermal evaporation process in vacuum. It is of great importance for highly oriented organic/metal films to have improved device performances such as higher current density and luminance efficiency. AFM (Atomic Force Microscope) and XRD (X-Ray Diffraction) analyses were used to characterize the topology and structure of oriented NPD films. The multi-source meter was used to observe the current-voltage characteristics of the ITO (Indium-Tin Oxide) / NPD (4,4'bis[N-(1-napthyl)-N-phenyl-amino]-biphenyl) / Al (Aluminum) device. While NPD thin films deposited under magnetic field were not molecularly well aligned according to the XRD results, the films after post-deposition annealing at $130^{\circ}C$ were well-oriented. AFM images show that NPD thin films deposited under magnetic field had a smoother surface than those deposited without magnetic field. The current-voltage performance of NPD thin films was improved due to the enhanced electron mobility in the well-aligned NPD films.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.1-7
• /
• 2017

Polydimethylsiloxane (PDMS) can be deposited on various substrates using chemical vapor deposition process, which results in the formation of PDMS thin films with thickness below 5 nm. PDMS layers can be evenly deposited on surfaces of nanoparticles composed of various chemical compositions such as $SiO_2$, $TiO_2$, ZnO, C, Ni, and NiO, and the PDMS-coated surface becomes completely hydrophobic. These hydrophobic layers are highly resistant towards degradation under acidic and basic environments and UV-exposures. Nanoparticles coated with PDMS can be used in various environmental applications: hydrophobic silica nanoparticles can selectively interact with oil from oil/water mixture, suppressing fast diffusion of spill-oil on water and allowing more facile physical separation of spill-oil from the water. Upon heat-treatments of PDMS-coated $TiO_2$ under vacuum conditions, $TiO_2$ surface becomes completely hydrophilic, accompanying formation oxygen vacancies responsible for visible-light absorption. The post-annealed $PDMS-TiO_2$ shows enhanced photocatalytic activity with respect to the bare $TiO_2$ for decomposition of organic dyes in water under visible light illumination. We show that the simple PDMS-coating process presented here can be useful in a variety of field of environmental science and technology.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.140-145
• /
• 2006

The mort commonly available substrate material is glass in the display fibrication process. However, glass is not desirable due to its heaviness and fragility. Recently, plastics such polysulfone (PSF), polyethesulfone (PES), polycarbonate (PC), polyethylene terephthalate (PET) and cyclic olefin polymers (COP) have been investigated to replace glass as a substrate material for display fibrication. Plastic substrates are advantageous in that they are lightweight, huh impart resistance, flexibility, and ability for roll to roll manufacturing process. But many plastics have poor chemical resistance in organic solvent. The chemica resistance is also lequired because they are exposed to solvents for various chemical treatments din the manufacturing process. So, we have an interest in the chemical modification of PSF to improve chemical resistance. We introduced crosslinkable imide moieties using chloromethylation method for the modification of PSF which could be overcome above shortcomings for display substrate based on plastic film. We prepared the cross-linked polysulfone films which were represented chemical resistance in HeOH, THF, DMSO and NMP. The thermal properties were measured by TGA, DSC and TMA. As the results, we have confirmed to enhance of the thermal property. They had low coefficient of thermal expansion (CTE) which decreased to 15% and had increased $T_g\;from\;180^{\circ}C\;to\;252^{\circ}C$. Cross-linked polysulfone films with imide side-chain had good optical properties and chemical resistance so that they could be used as flexible display substrate.

• Korean Journal of Food Science and Technology
• /
• v.26 no.5
• /
• pp.567-572
• /
• 1994

Diglyceride was prepared by reaction of hydrogenated beef tallow and glycerol (GL) in the presence of a Pseudomonas lipase. Both substrates were mixed at the ratio of GL/Triglyceride of 0.5 which is the stoichiometric molar ratio for the complete conversion of triglyceride (TG) to diglyceride (DG). DG can be obtained by solid phase-glycerolysis of hydrogenated beef tallow without use of organic solvents or emulsifiers by careful control of reaction temperature. Optimized reaction temperature condition was as follows: An initial incubation at$60^{\circ}C$ for 2h followed by the first temperature shift down to $55^{\circ}C$ for 4h, and then the second shift down to $50^{\circ}C$ for up to 3 days. There was a large decrease in the content of TG during the first $60^{\circ}C$ incubation for 2h. Even a prolonged incubation at $60^{\circ}C$ could not make a change of the composition of the reaction mixture at liquid state. By controlling the temperature lower than $60^{\circ}C$, reaction mixtures were solidified. The reaction temperature at $50^{\circ}C$ below the melting temperature of hydrogenaed beef tallow gave an 71% optimum yield of DG after 72h enzymatic glycerolysis and about 73% of total DG was 1,3-DG.

• The Korean Journal of Physiology
• /
• v.20 no.2
• /
• pp.225-235
• /
• 1986

Effects of anions on p-Aminohippurate (PAH) transport across the basolateral membrane (BLM) were studied. Basolateral membrane vesicles were isolated from rabbit renal cortex by using a self-orienting Percoll-gradient centrifugation and $Mg^{2+}-precipitation$. The characteristics of the membrane vesicles was examined by marker enzyme activity, membrane orientation and transport studies. The Na-K-ATPase activity in the fraction containing BLM vesicles was enriched 9·fold, and the alkaline phosphatase activity in the fraction containing BBM vesicles was increased 9-fold, compared with those of the homogenate. The transport properties of the two membrane preparations were studied by a rapid filtration technique. The uptake of PAH by BLM was sensitive to changes in medium osmolarity and inhibited by probenecid. When the uptake of $50{\mu}M$ PAH in voltage-clamped BLM vesicles was determined in the presence of various anions in the incubation medium, cis inhibitions by $SO_4\;and\;SSO_3$ were observed in the presence of sodium gradient (out>in). Sodium-dependent PAH uptake was inhibited competitively by external $SO_4$ PAH uptake in BLM vesicles loaded with 20 mM acetate and $SO_4\;or\;200\;{\mu}M$ PAH was significantly stimulated as compared with unloaded vesicles. The extent of trans-stmulation of PAH uptake by $SO_4$. was increased with the inside concentration of $SO_4$. This trans-stimulatory effect by $SO_4$, was observed to be additive in the presence of Na gradient and completely inhibited by 2 mM probenecid and 1 mM SITS. These results demonstrate that PAH/anion exchange is present in BLM of renal cortex and in this exchange mechanism inorganic as well as organic anions are involved as substrates.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.3
• /
• pp.49-56
• /
• 2002

In this study, the InGaP epilayers were grown on the exact and the $2^{\circ}$, $6^{\circ}$, $10^{\circ}$ of cut GaAs substrates by metal-organic vapor phase epitaxy, and the effects of interfacial elastic strains determined by the substrate offcut angle upon the resulting dislocation density of epilayer were investigated for the first time. The elastic strains were obtained from lattice mismatch and lattice misfit by TXRD, and the dislocation densities from epilayer x-ray FWHM. For the offcut angle range used in this study, the elastic strain was maximum and x-ray FWHM minimum at offcut angle $6^{\circ}$. From 11K PL measurements, PL wavelength was found to decrease with an increase of offcut angle. PL intensity was maximum at offcut angle $6^{\circ}$. TEM results showed that the electron diffraction pattern was of typical zincblende structure, and that the dislocation density was minimum for substrate offcut angle $6^{\circ}$. The results obtained in this study, along with the device fabrication process and beam characteristics, clearly demonstrated that the optimum substrate offcut angle for the InGaP/GaAs heterostructures is $6^{\circ}$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.1052-1058
• /
• 2005

Structured lipid (SL) was synthesized by enzymatic interesterification with algae oil containing docosahexaenoic acid (DHA) and soybean oil in the stirred-batch type reactor. The reaction was performed for 15hr at $65^{\circ}C$ with 300 rpm catalyzed by sn-1,3 specific Lipozyme RM 1M lipase from Rhizomucor miehei ($11\%$ by weight of total substrates) in the absent organic solvent. SL contained $87.1\;area\%$ triacylglycerol (TAG), $12.1\;area\%$ diacylglycerol (DAG), $0.6\;area\%$ monoacylglycerol (MAG), and $0.2\;area\%$ free fatty acid (FFA). Major fatty acid profiles of SL were DHA $(15.7\;mol\%)$, linoleic $(31.1\;mol\%)$, palmitic $(20.2\;mol\%)$, oleic $(13.5\;mol\%)$ and eicosapentaenoic acid $(EPA,\;6.6 mol\%)$. SL contained the newly synthesized several peaks. Iodine and saponification of SL were 206.7 and 183.8. SL color showed darker and redder than soybean oil, and appeared the most yellowish color among SL, soybean, and algae oil.

• Journal of Life Science
• /
• v.27 no.9
• /
• pp.1086-1095
• /
• 2017

There is growing interest in groundwater resources to overcome the loss of surface water resources due to climate change. An understanding of the microbial community of aquifers is essential for monitoring and evaluating groundwater contamination, as well as groundwater management. Most microorganisms that inhabit aquifer ecosystems are attached to sediment particles rather than planktonic, as is the case in groundwater. Since sampling aquifer sediment is not easy, groundwater, which contains planktonic microorganisms, is generally sampled in microbial community research. Although many studies have investigated microbial communities in contaminated aquifers, there are only a few reports of microbial communities in uncontaminated or pristine aquifers, resulting in limited information on aquifer microbial diversity. Such information is needed for groundwater quality improvement. This paper describes the ecology and community structure of groundwater bacteria in uncontaminated aquifers. The diversity and structures of microbial communities in these aquifers were affected by the concentration or distribution of substrates (e.g., minerals, organic matter, etc), in addition to groundwater characteristics and human activities. Most of the microbial communities in these uncontaminated aquifers were dominated by Proteobacteria. Studies of microbial communities in uncontaminated aquifers are important to better understand the biogeochemical processes associated with groundwater quality improvement. In addition, information on the microbial communities of aquifers can be used as a basis to monitor changes in community structure due to contamination.