• 한국생물공학회:학술대회논문집
• /
• 2001.11a
• /
• pp.723-726
• /
• 2001

This study was performed to improve the yield of bacterial cellulose(BC) by UV and NTG mutagenesis of strain KJ-1 which produced largely BC. some mutants showed high BC productivity with twice elevation compared to that the wild strain KJ-1. A difference was found in production and bioconversion phase of synthesized organic acid, such as gluconic acid, 2-keto gluconic acid, and 5-keto gluconic acid between mutants and strain KJ-1 in the static culture. The organic acid produced in secondary metabolism phase, were more rapidly consumed in the culture with the mutants than that the parent strain after glucose in the broth was conversed to a limiting substrate. Therefore, we suggested the reason for increasing of BC production that the mutant strain consumed more efficiently synthesized acids as substrates than that of the parent strain.

• Journal of Korean Society of Water and Wastewater
• /
• v.10 no.3
• /
• pp.73-82
• /
• 1996

The removal efficiencies of organic substrates, nitrogen and phosphorus in the anaerobic-aerobic biological phosphorus removal process were investigated by addition of acetic acid, propionic acid and butyric acid which are normal volatile fatty acids contained in anaerobic digester supernatants. Substrate utilization coefficients for the phosphorus release and uptake were also estimated. The effect of a VFA, which showed higher phosphorus removal efficiency than the other VFAs did, was also studied in an anaerobic-aerobic-anoxic biological nutrient removal process. For the anaerobic-aerobic process added by VFA, the phosphorus removal efficiencies were up to about 68%, 55% and 61% for the reactors of acetic acid, propionic acid and butyric acid added, respectively, which indicates the efficiencies were increased by about 8-21%, comparing to that of 47% for the reactor with no VFA added. There were no significant difference in removal efficiencies for organic substrate and $NH_3-N$ without regard to addition of VFA. However, the removal efficiency of total nitrogen was increased in the case of VFA added, since $NO_3-N$ was less produced. For the anaerobic-aerobic-anoxic process added VFA, the removal efficiencies for $NH_3-N$ and $PO{_4}^{3-}-P$ were increased by 5% and 13%, respectively, comparing with them in the reactors not added VFA.

• Journal of Adhesion and Interface
• /
• v.4 no.2
• /
• pp.1-9
• /
• 2003

Epoxy-amine liquid prepolymers are extensively applied onto metallic substrates and cured to obtain painted materials or bonded joint structures. Overall performances of such systems depend on the created interphase between the organic layer and the substrate. When epoxy-amine liquid mixtures are applied onto more or less hydrated metallic oxide layer, concomitant amine chemical sorption and hydroxide dissolution appear lending to the chelate formation. As soon as the chelate concentration is higher than the solubility product, these species crystallize as sharp needles. Moreover, intrinsic and thermal residual stresses are developed within painted or bonded systems. When residual stresses are higher than the organic layer/substrate adhesion, buckling, blistering, debonding may occur leading to a catastrophic drop of system performances. Practical adhesion can be evaluated with either ultimate parameters (Fmax or Dmax) or the critical strain energy release rate, using the three point flexure test (ISO 14679-1997). We observe that, for the same system, the ultimate load decreases while residual stresses increase when the liquid/solid time increases. Ultimate loads and residual stresses depend on the metallic surface treatment. For these systems, the critical strain energy release rate which takes into account the residual stress profile and the Young's modulus gradient remains quite constant whatever the metallic surface treatment was. These variations will be discussed and correlate to the formation mechanisms of the interphase.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.3
• /
• pp.119-125
• /
• 2004

Sugar beet stillages were used as a substrate for the production of single cell protein by a thermotolerant yeast Candida rugosa. 3 Stillage substrates were nutritionally optimized for the better production of yeast biomass and for the reduction of COD. The addition of Phosphorus(P) was required for all stillages, but Nitrogen(N) only when the residual sugar remained. The addition of P increased the biomass production to 23-61%. The addition of N increased the biomass production only a little, but when added together with P increased to 90%. The COD decreased to 26-46% when P was added, but decreased to 85% when P was added together with N.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1364-1369
• /
• 2005

In this paper, we have identified the mechanism of C-V hysteresis behavior often observed in pentacene organic thin-film transistors (OTFTs). The capacitance-voltage (C-V) characteristics were measured for pentacene OTFTs fabricated on glass substrates with MoW as gate/source/drain electrode and TEOS $SiO_2$ as gate insulator. The measurements were made at room temperature and elevated temperatures. From the room temperature measurements, we found that the hysteresis behavior was caused by hole injection into the gate insulator from the pentacene semiconductor for large negative gate voltages, resulting in the negative flat-band voltage shift. However electron injection was observed only at elevated temperatures

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.811-813
• /
• 2003

We investigated the electrical properties of self-assembled (4,4'-Di(ethynylphenyl)-2'-nitro-1-thioacetylbenzene), which has been well known as a conducting molecule having possible application to molecular level negative differential resistance(NDR)[1]. Generally, the phenomenon of NDR can be characterized by the decreasing current with the increasing voltage[2]. To deposit the SAM layer onto gold electrode, we transfer the prefabricated nanopores into a 1mM self-assembly molecules in THF solution. Au(111) substrates were prepared by ion beam sputtering method of gold onto the silicon wafer. As a result, we measured the voltage-current properties and confirmed the negative differential resistance properties of self-assembled organic thin film and measured, using Scanning Tunneling Microscopy(STM).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.45-48
• /
• 2002

Poly(3-hexylthiophene) or P3HT based organic thin film transistor (OTFT) array was fabricated on flexible poly carbonate substrates and the electrical characteristics were investigated. As the gate dielectric, a dual layer structure of polyimide-$SiO_2$ was used to improve the roughness of $SiO_2$ surface and further enhancing the device performance and also source-drain electrodes were $O_2$ plasma treated for improvement of the electrical properties, such as drain current and field effect mobility. For the active layer, polymer semiconductor, P3HT layer was printed by contact-printing and spin-coating method. The electrical properties of OTFT devices printed by both methods were evaluated for the comparison. Based on the experiments, P3HT-based OTFT array with field effect mobility of 0.02~0.025 $cm^{2}/V{\cdot}s$ and current modulation (or $I_{on}/I_{off}$ ratio) of $10^{3}\sim10^{4}$ was fabricated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.13-15
• /
• 2005

The growth of $Bi_2Te_3$ thin films on (001) GaAs substrates by metal organic chemical vapour deposition (MOCVD) is discussed in this paper. The results of surface morphology, electrical and thermoelectrical properties as a function of growth parameters are given. The surface morphologies of $Bi_2Te_3$ films were strong1y dependent on the deposition temperatures. Surface morphologies varied from step-flow growth mode to island coalescence structures depending on deposition temperature. In-plane carrier concentration and electrical Hall mobility were highly dependent on precursor's ratio of Te/Bi and deposition temperature. The high Seebeck coefficient (of $-160{\mu}VK^{-1}$) and good surface morphology of our result is promising for $Bi_2Te_3$ based thermoelectric thin film and two dimensional supperlattice device applications.

• Economic and Environmental Geology
• /
• v.33 no.5
• /
• pp.353-365
• /
• 2000

After their first appearance on Earth, bacteria have exerted significant influence on geochemical behavior of elements. Numerous evidence of their control on geochemistry through geologic history has been observed in a variety of natural environments. They have mediated weathering rate, formation of secondary minerals, redox transformation of metals and metalloids, and thus global cycling of elements. Such ability of bacteria receives so considerable attention from microbiologists, mineralogists, geologists, soil scientists, limnologists, oceanographers, and atmospheric scientists as well as geochemists that a new and interdisciplinary field of research called 'geomicrobiology' is currently expanding. Some recent subjects of geomicrobiology which are studied extensively are as follows: 1) Functional groups distributed on bacterial cell walls adsorb dissolved cations onto cell surfaces by electrostatic surface complexation, which is followed by hydrous mineral formation. 2) Dissimilatory metal reducing bacteria conserve energy to support growth by oxidation of organic matter coupled to reduction of some oxidized metals and/or metalloids. They can be effectively used in remediating environments contaminated with U, As, Se, and Cr. 3) Bacteria increase the rate of mineral dissolution by excreting proton and ligands such as organic acids into aqueous system. 4) Thorough investigation on the effects of biofilm on geochemical processes is needed, because most bacteria are adsorbed on solid substrates and form biofilms in natural settings.

• Korean Journal of Organic Agriculture
• /
• v.6 no.1
• /
• pp.109-116
• /
• 1997

This experiment was carried out to examine the effect of various functional materials such as bioceramic podwers, crushed shells and elvanites supplemented to the each substrate on the seedlings growth of cucumber, watermelon and tomato. The seedlings were grown in pots filled with substrates of bioceramic podwers, crushed shell and elvanites. The growth of cucumber seedlings in terms of plant height, stem diameter, leaf width, leaf area, plant fresh and dry weight was promoted by adding the bioceramic. powder (1 to 2g/kg), crushed shells (20 to 80g/kg) or elvanites (20 to 80g/kg). Watermelon seedlings in terms of plant height, number of leaves and leaf area were greater than those of the control by adding bioceramics (1 to 2g/kg). Plant height was also promoted by the adding of bioceramic power from 16 days after treatment. But leaf area was increased from 8 days after treatment, while stem diameter was not affected. Watermelon seedlings were also influenced by adding curshed shells (20 to 80g/kg) and elvanites (20 to 40g/kg) into each substrate. The growth of characteristics of tomato seedlings were promoted by adding 1 to 3g/kg of bioceramics, 10 to 80g/kg of crushed shell or 20 to 40g/kg of elvanites, respectively. Especially, root growth was greatly influenced by bioceramic powder, whereas the shoot growth(leaves and stem) was stimulated by crushed shells and elvanites suppemented into substrate.