• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.10a
• /
• pp.7-38
• /
• 2000

Performance, reliability, form factor drive flip chip use. BGAs and CSPs will provide stepping stone to FC DCA .Growing vendor infrastructure - Low cost, high density organic substrates -New generations of fluxes and underfills .Adhesives flip chip technology as a low cost flip chip alternatives -Low cost Au stud or Electroless Ni bumps -Reliable thermal cycling and electrical performance.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.349.2-350
• /
• 2002

Deprotection of the benzyl group has been widely used in multi-step organic synthesis with a variety of reaction conditions. including catalytic hydrogenolysis. Lewis acids such as FeCl$_3$ or MgBr$_2$ and lithium naphthalenide. However. these procedures sometimes can be problematic with multifunctional substrates. such as unsaturated bonds during hydrogenolysis. an acid-labile moiety in FeCl$_3$ and a easily reducible functional group in lithium naphthalenide. (omitted)

• 한국초전도학회:학술대회논문집
• /
• v.13
• /
• pp.89-89
• /
• 2003

• Proceedings of the Korean Ceranic Society Conference
• /
• 2004.10a
• /
• pp.83.2-83.2
• /
• 2004

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.475-477
• /
• 2014

Self-assembly of the molecular system of perylene-3,4,9,10-tetracarboxylic-3,4,9,10-dianhydride (PTCDA) is of such potential importance for organic semiconductor devices that PTCDA molecule on a variety of substrates has been extensively studied. Therefore we studied the density of states (DOS), the charge densities, and intermolacular bond lengths for PTCDA, and investigated PTCDA absorptioni sites on Si(111)In-$8{\times}8$ at room temperature using the density functional theory calculations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.673-676
• /
• 1999

We fabricated green sheet by tape casting method with fluormica glass-ceramic powders for fabrication of low temperature co-firing substrate. After ball milling with organic additives, we investigated green strength and density of green sheets which were casted by doctor blade machine. Green sheets were sintered at 700 ~ 1,00$0^{\circ}C$ for 1 ~3hrs. Microstructure, linear shrinkage and dielectric constant of substrates were surveyed.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.54 no.1
• /
• pp.8-12
• /
• 2005

Indium tin oxide(ITO) surface treated by Oxygen plasma has been in situ analyzed using XPS(X-ray Photoelectron Spectroscopy) and EDS(Energy Dispersive Spectroscopy), to investigate the relations between the properties of the ITO surface and the properties of OLED(Organic Light Emitting Diode). We measured electrical resistivity using Four-Point-Probe and calculated sheet resistance, and ITO surface roughness was measured by AFM(Atomic Force Microscope). We fabricated OLED using substrate that was treated optimum ITO surface. The plasma treatment of the ITO surface lowered the operating voltage of the OLED. We have obtained an improvement of luminance and decrease of turn-on voltage.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.5
• /
• pp.267-270
• /
• 2006

The Indium tin oxide (ITO) films were deposited on CR39 substrate using DC magnetron sputtering. ITO thin films deposited at room temperature because CR39 substrates its glass-transition temperature of is $130^{\circ}C$. ITO thin films used bottom and top electrode and for organic thin film transparent transistor.(OTFT) ITO thin film electrodes electrical properties and optical transparency properties in the visible wavelength range (300 - 800 nm) strongly dependent on volume of oxygen percent. For the optimum resistivity and transparency of ITO thin film electrode achieved with a 75 W plasma power, 10 % volume of oxygen and a 27 nm/min deposition rate. Above 85 % transparency in the visible wavelength range (300 - 800 nm) measured without post annealing process and $9.83{times}10{-4}{\Omega}cm$ a low resistivity was measured thickness of 300 nm.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.2
• /
• pp.79-90
• /
• 2001

Commercial liquid seeds are used for supplying active microbial flora to organic wastewater treatment plants of high feed-to-microorganism ratio and to maintain optimal microbial condition during unsteady state operation of the biological wastewater treatment plant. In addition to bacterial cells, the liquid weeds contain various additives for special purposes as well as organic substrates for energy supply. The additives give physical stability for the maintenance of microbial decomposition activity and ability to control the overgrowth of seed strains. In this work, the effects of addition of two kinds of typical substrate additives, poly aluminum chloride(PAC) and poly aluminum sulfate(PAS) on the consitutional total cell counts(CFU/ml) of four kinds of reorganization liquid seeds(RLS I, RLS II, RLS III and RLS IV) were studied experimentally. The addition of PAC and PAS gave negative effect on TCC constitution for the four seeds studied.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.623-624
• /
• 2004

The coating and estimation of gas and moisture barriers on polymer and glass substrates are receiving very much attention in passivation of organic light emitting devices (OLEDs). In this study, the encapsulation and lifetime measurement techniques of OLEDs were presented. The degradation mechanisms of bare and encapsulated OLEDs were investigated by the visual lifetime measurement (VLM) system with the parameters such as a pixel luminance(L), a luminance rms roughness(dL), a brightness area ratio(R), an edge degradation depth(D), etc.