• Korean Journal of Materials Research
• /
• v.18 no.6
• /
• pp.307-312
• /
• 2008

In this study, a new cleaning process with a low cost of ownership (CoO) was developed with ozonated DI water ($DIO_3$). An ozone concentration of 40 ppm at room temperature was used to remove organic wax film and particles. Wax residues thicker than $200\;{\AA}$ remained after only a commercial dewaxer treatment. A $DIO_3$ treatment in place of a dewaxer showed a low removal rate on a thick wax layer of $8000\;{\AA}$ due to the diffusion-limited reaction of ozone. A dewaxer was combined with a $DIO_3$ rinse to reduce the wax removal time and remove wax residue completely. Replacing DI rinse with the $DIO_3$ rinse resulted in a surface with a contact angle of less than $5^{\circ}$, which indicates no further cleaning steps would be required. The particle removal efficiency (PRE) was further improved by combining a SC-1 cleaning step with the $DIO_3$ rinsing process. A reduction in the process time was obtained by introducing $DIO_3$ cleaning with a dewaxing process.

• Journal of Environmental Science International
• /
• v.8 no.1
• /
• pp.19-26
• /
• 1999

The degree of pesticides accumulation in tap water in Taejon from June 1995 to Apr 1996 was measured by Ellman's coupled enzyme assay. Since organic phosphate and carbamate pesticides specifically inhibit the neurotransmitter modulating enzyme acetylcholinesterase(AChE), the enzyme activity can be used as a diagnosis for the pesticides accumulation in water and various samples. During the period of this study, the enzyme activity was changed almost every week. The lowest enzyme activity was 64 % of that of the control reaction and there are several days showing about 100 % enzyme activity. In general, the enzyme activity is higher in summer than other seasons especially early spring times. The pH value of tap water was very close to neutral(pH 7.0) and it seems that the enzyme activity was not affected by the small pH changes. Either boiling of tap water or addition of NaOH solution decomposed the pesticide components. These results show that AChE assay is a convenient, sensitive, and reliable method for detection of pesticides in water samples.

• Journal of the Korean Ceramic Society
• /
• v.31 no.3
• /
• pp.282-290
• /
• 1994

In this research, the organic salt [RCOOH] Br with long alkyl-chain was synthesized, and the organophilic [RCOOH]-Montmorillonite was formed by cation-exchange-reaction between Na-Montmorillonite and synthesized organic salt [RCOOH] Br. After drying of the organophilic [RCOOH]-Montmorillonite at $65^{\circ}C$ in high vaccum, the experiments for the probability of forming its complexes with various swelling-solutions as dist, water, methanol, ethanol, acetonitrile, propionitrile, butyronitrile, toluene and n-decanol were performed, and the corresponding basal spacings obtained were 17.44$\AA$, 31.86$\AA$, 34.38$\AA$, 30.37$\AA$, 32.39$\AA$, 35.04$\AA$, 14.16$\AA$ and 14.63$\AA$ respectively.

• Korean Journal of Materials Research
• /
• v.27 no.5
• /
• pp.255-262
• /
• 2017

Reactive oxygen species (ROS) can be produced by interactions between sunlight and light-absorbing substances in natural water environments and can completely destroy various organic pollutants in waste water. In this study, we used graphene oxide modified $Ag_2Se$ nanoparticles to enhance photochemically generated oxygen (PGO) species activity. Surface area and pore volumes of the $Ag_2Se-graphene$ ($Ag_2Se-G$) samples showed catastrophic decrease due to deposition of $Ag_2Se$. The generation of reactive oxygen species was detected through the oxidation reaction of DPCI to DPCO. The photocurrent density and the PGO effect increase in the case of the use of modified graphene. The PGO effect of the graphene modified with $Ag_2Se$ composites increased significantly due to a synergetic effect between graphene and the $Ag_2Se$ nanoparticles. The photocatalytic activity of sample was evaluated by measuring the degradation of organic pollutants such as methylene blue (MB) and industrial dyes such as Texbrite BA-L (TBA) under visible light.

• Membrane and Water Treatment
• /
• v.13 no.6
• /
• pp.321-335
• /
• 2022

Copper-based Metal-organic framework (MOF) namely ([Cu (INA)₂]-MOF) is synthesized by ball milling and characterized using scanning electron microscopy (SEM) for the topography, microstructure, and elemental evidence determination, powdered X-ray diffraction (XRD) for the crystallinity measurement, thermogravimetric (TG) analysis was performed to determine the thermal stability of the material, and Fourier transformed infrared (FTIR) spectroscopy for functional groups identification. The use of [Cu (INA)₂]-MOF as hazardous removal material of β-agonists as persistent hazardous micro-pollutants in our environmental water is first reported in this study. The removal efficiency of the Cu-MOF is successfully determined to be 97.7% within 40 minutes, and the MOF has established an exceptional removal capacity of 835 mg L^-1 with 95 % percent removal on Clenbuterol (CLB) even after the 5th consecutive cycle. The Langmuir model of the adsorption isotherms was shown to be more favourable, while the pseudo-second-order model was found to be favoured in the kinetics. The reaction was exothermic and spontaneous from a thermodynamic standpoint, and the higher temperatures were unfavourable for the adsorption study of the CLB. As a result, the studied MOF have shown promising properties as possible adsorbents for the removal of CLB in wastewater.

• Clean Technology
• /
• v.22 no.3
• /
• pp.175-180
• /
• 2016

Tyrosinases catalyze the hydroxylation of a monophenol (monophenolase activity) and the conversion of an o-diphenol to o-quinone (diphenolase activity), which are mainly involved in the modification of tyrosine residues into 3,4-dihydroxyphenyl-alanine (DOPA) and DOPA/DOPAquinone-derived intermolecular cross-linking. Previously, we obtained a slightly acidic and cold-active tyrosinase, tyrosinase-CNK, by our recombinant protein approach. The enzyme showed optimal activity at pH 6.0 and 20 ℃ with an abnormally high monophenolase/diphenolase activity ratio and still had approximately 50% activity compared with the highest activity even in ice water. Here, we investigated reaction stability of the recombinant tyrosinase-CNK as a psychrophilic enzyme. The enzyme showed remarkable thermal stability at 0 ℃ and the activity was well conserved in repeated freeze-thaw cycles. Although water-miscible organic solvent as reaction media caused the activity decrease of tyrosinase-CNK as expected, the enzyme activity was not additionally decreased with increased concentration in organic solvents such as ethanol and acetonitrile. Also, the enzyme showed high salt tolerance in chaotropic salts. It was remarkably considered that 2⁺ metal ions might inhibit the incorporation of Cu²⁺ into the active site. We expect that these results could be used to design tyrosinase-mediated enzymatic reaction at low temperature for the production of catechols through minimizing unwanted self-oxidation and enzyme inactivation.

• Journal of the Korean Ceramic Society
• /
• v.55 no.3
• /
• pp.261-266
• /
• 2018

Hollow or bumpy ZnO structures with micrometer-size features have been investigated as photocatalysts for water purification due to their high surface area available for reaction with harmful organic molecules and relatively large size for easy separation after finishing the photocatalytic reaction. In this study, selective synthesis of ZnO hollow or crumpled microspheres was performed using a simple and versatile ultrasonic spray pyrolysis process with various zinc precursors. The morphologies, phases, specific surface areas, and optical properties of the microspheres were characterized using X-ray diffraction, scanning electronic microscopy, nitrogen adsorption-desorption isotherms, and UV-vis spectroscopy. In addition, the mechanism underlying the formation of different morphologies and their photocatalytic activities were systematically investigated.

• Journal of the Korean Chemical Society
• /
• v.9 no.1
• /
• pp.61-65
• /
• 1965

Metal distribution in the reaction products and system of reactions between organo chloro acid or ester and zinc, silicon, magnesium, and tin under acetonitrile, dioxane, and toluene solvent were determined by means of radioactive tracer prepared by means of a (n, ${\gamma}$) reaction. It was found that the solubility of the organo halogen metal complex was markedly increased in a hydrophilic solvent and was decreased in a nonpolar solvent which resulted in an increased metal distribution in the recovered metal or water washing of the recovered metal mixture. This was also true in the case of the reaction conducted in the presence of a carbonyl compound. The relative increase of the solubility of the metal complex in a hydrophilic solvent was in order of zinc, silicon, tin and magnesium, and in a nonpolar solvent, it was in order of silicon, tin, magnesium, and zinc. There was no formation of organo metallics throughout the reaction sequence. The result was discussed and the observed solvent influence on the present reaction path was criticized.

• Textile Coloration and Finishing
• /
• v.30 no.2
• /
• pp.107-116
• /
• 2018

Simplification of the manufacturing process in shoe making is essential to improve productivity and reduce production costs. To improve the adhesion of EVA foam used as a midsole, EVA/itaconated EPDM(EPDM-g-IA)(80/20wt%) blend was prepared using Torque Rheometer-Plasti-Corder, and 1,6-hexamethylenediamine/crosslinking agent/foaming agent/additive were mixed, followed by amidation reaction and foaming to prepare EVA/EPDM-g-IA foam for shoe midsole. In this study, we investigate the effect of the content of 1,6-hexamethylenediamine(0, 0.5, 1.0, 2.0, 3.0) on the mechanical properties, water-contact angle and adhesion of EVA/itaconated EPDM foam. As the content of 1,6-hexamethylenediamine increased, mechanical properties such as tensile strength, tear strength, tensile elastic modulus, hardness, and water-contact angle were lowered, but elongation at break and compression set(%) were increased. Both normal type and non-UV type adhesive strength increased with increasing diamine content. In particular, it was found that the adhesion strength of the non-UV type adhesion increased sharply with increasing diamine content. As a result, an adherend rupture occurs in a foam sample having a content of 1,6-hexamethylenediamine of 3phr. From this, it can be seen that the EVA/itaconated EPDM foam for shoe midsoles, which can be used for non-UV adhesion without primer and UV treatments, have been developed.

• Journal of Environmental Health Sciences
• /
• v.27 no.1
• /
• pp.27-35
• /
• 2001

This aim of the work presented in this paper is to investigate the factors that affcet chlorine decay and to develop functional relationships that can be used to enhance the durability of network models. predictive relationships were established that correlated the rate of chlorine decay to the various water conditions such as DOC, N $H_3$-N, initial chlorine, contact time, temperature and pH values. Free chlorine residual decreased with increasing temperature, DOC, N $H_3$-N, reaction time and chlorine dose. At 2$0^{\circ}C$, pH 7, The initial chlorine demand per mg as DOC/L and mg as N $H_3$-N/L was about 0.43, 2.69 mg/$\ell$ respectively at 180 minutes contact time. The Reaction between chlorine and humic acids was lasted intil 48hr, but the reaction between chlorine and N $H_3$-N was almost completed in 180 min. When the temperature is raised by 1$0^{\circ}C$, chlorine is more consumed about 0.25 mg/$\ell$ in the absence of organic substances and it is more consumed about 3.4 mg/$\ell$ in the presence of humic acid (5 mg/$\ell$) in water at pH 7 for 180 min. Regression Analysis created the resulting prediction equation for the chlorine decay in a SPSS package of the computer system. The model is as follows; $C_{t}$=1.239+0.707(Co)-0.000529(Time)-0.0112(Temp)+0.02227(pH)-0.42(DOC)-2.132(N $H_3$-N).).