• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.81-82
• /
• 2007

열처리 조건이 이종접합 유기태양전지(heterojunction organic photovoitaics)의 power conversion efficiency(PCE)에 미치는 영향에 대해 살펴보았다. 본 연구에서는 열처리 온도와 열처리 시간을 변수로 다양한 조건하에서 유기태양전지를 제작하고 AM1.5G 조건에서의 효율 변화를 관찰하였다. 열처리 온도는 $90^{\circ}C$, 열처리 시간은 20분에서 가장 우수한 변환효율이 관찰되었다.

• Textile Coloration and Finishing
• /
• v.26 no.4
• /
• pp.347-352
• /
• 2014

Film thickness dependent nanostructure evolution by a post annealing was investigated in poly (3-hexylthiophene):phenyl-C61-butyric acid methyl ester(P3HT:PCBM) films for organic solar cells which were fabricated by dichlorobenzene(DCB) solvent. In case of a 70nm thin film, the thermal annealing process affected to slight increment of the P3HT crystals in the surface region. On the other hand, large number of small sized P3HT crystals near the surface region was formed in the 200nm thick film. The solar cell devices showed the 3% power conversion efficiency(PCE) in 1:0.65 and 1:1 ratio(by weight) of P3HT and PCBM in 70nm and 200nm thickness conditions, respectively. Despite to the similar PCE, the short circuit current Jsc was different in 70nm and 200nm devices, which was related to the different nanostructure of P3HT:PCBM after thermal annealing.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.57.1-57.1
• /
• 2011

We studied the performance of CdSe nanoparticle in the active layer of organic photovoltaics (OPVs) by changing concentration of the CdSe NPs in the P3HT:PCBM layer. We observed that the absorption peak value gradually increases with the increasing amount of CdSe NPs at 600nm wave length. However, the electrical properties of OPVs correspond less with the tendency of UV/visible result. The highest performance was shown with 10% of CdSe NPs. The device performance decreased after 10% of CdSe NPs, this shows the dependencies of performanc of hybrid solar cells on the CdSe NPs loading amount. The resulting OPVs with 10 % of CdSe NPs show a short circuit current density ($J_{sc}$) of $6.96mA/cm^2$, open circuit voltage ($V_{oc}$) of 0.61V, fill factor (FF) of 0.59, and power conversion efficiency (PCE) of 2.53% under AM 1.5 ($100mW/cm^2$).

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.353-356
• /
• 2014

We fabricated organic photovoltaic (OPV) based on ZnO ripple structure on indium tin oxide as electron-collecting layers and PTB7-F20 as donor polymer. In addition, atomic layer deposition (ALD) was used for preparing additional ZnO layers on rippled ZnO. Addition of 2 nm-thick ALD-ZnO resulted in enhanced initial OPV performance and stability. Based on photoluminescence results, we suggest that ALD-ZnO layers reduced number of surface defect sites on ZnO, which can act as electron-hole recombination center of OPV, and increased resistance of ZnO towards surface defect formation.

• Journal of Powder Materials
• /
• v.27 no.4
• /
• pp.305-310
• /
• 2020

In this study, partially dry transfer is investigated to solve the problem of fully dry transfer. Partially dry transfer is a method in which multiple layers of graphene are dry-transferred over a wet-transferred graphene layer. At a wavelength of 550 nm, the transmittance of the partially dry-transferred graphene is seen to be about 3% higher for each layer than that of the fully dry-transferred graphene. Furthermore, the sheet resistance of the partially dry-transferred graphene is relatively lower than that of the fully dry-transferred graphene, with the minimum sheet resistance being 179 Ω/sq. In addition, the fully dry-transferred graphene is easily damaged during the solution process, so that the performance of the organic photovoltaics (OPV) does not occur. In contrast, the best efficiency achievable for OPV using the partially dry-transferred graphene is 2.37% for 4 layers.

• Journal of Sensor Science and Technology
• /
• v.28 no.1
• /
• pp.23-29
• /
• 2019

A copper tetracumylphenoxy phthalocyanine (CuPccp) thin film was formed on an organic insulator film by Langmuir-Blodgett (LB) deposition for gas sensor fabrication. To increase the reproducibility of film transfer, stearyl alcohol was used as a transfer promoter. The structural properties of the CuPccp layers were optically monitored through attenuated total reflection and polarization-modulated ellipsometry techniques. The average thickness of a single layer of the CuPccp LB film was measured to be 2.5 nm. Despite the role of the transfer promoter, the stability of the layer transfer was not sufficient to ensure homogeneity of the LB film. This was probably due to the presence of aggregates in the molecular structure of the CuPccp LB film. Nevertheless, copper phthalocyanine polymorphism can be greatly suppressed by the LB arrangement, which appears to contribute to the improvement of electrical conductivity. The p-type semiconductor characteristics were confirmed by Hall measurements from the CuPccp LB films.

• Journal of Sensor Science and Technology
• /
• v.28 no.4
• /
• pp.236-239
• /
• 2019

In this work, we performed an optical simulation study on the performance of a PMDPP3T:PCBM based on an organic photovoltaic (PV) device. The virtual PV device was developed in Lumerical, finite-difference time-domain (FDTD) solutions. Different layers of the PV cell have been defined through the incorporation of complex refractive index value of those layers' constituent materials. During the simulation study, the effect of the variation active layer thickness on an ideal short circuit current density ($J_{sc,ideal}$) of the PV cell has been, first, observed. Thereafter, we have investigated the impact of surface roughness of a transparent conducting oxide (TCO) electrode on $J_{sc,ideal}$ of the PV cells. From this simulation, it has been observed that the $J_{sc,ideal}$ value of the PV cell is strongly dependent on the thickness of its active layer and the photon absorption of the PV cell has gradually decreased with the increment of the TCO's surface roughness. As a result, the capability of the PV device has been reduced with the increment of the surface roughness of the TCO.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.10
• /
• pp.1049-1054
• /
• 2012

Continued advancements in organic materials have led to the development of organic devices that are thin, flexible, and lightweight and that can potentially be used as low-cost energy-conversion devices. While these devices have many advantages, the environmentally induced degradation of the active materials and the low-work-function electrodes remain a valid concern. Hence, many vacuum deposition processes have been applied to develop low-permeation barrier coatings. In this work, we present the results pertaining to the developed thin-film encapsulation. Multilayer encapsulation involves the use of $SiO_x$ or $SiN_x$ with parylene. The effective water vapor transmission rates were investigated using a Ca-corrosion test. The integration of the developed barrier layers was demonstrated by encapsulating pentacene/$C_{60}$ solar cells, and the results are presented.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.93-93
• /
• 2010

Semiconductor nanocrystal quantum dots (NQDs) have recently attracted considerable interest for use in photovoltaics. Band gaps of NQDs can be tuned over a considerable range by varying the particle size thereby allowing enhance absorption of solar spectrum. NQDs, synthesized using colloidal routes, are solution processable and promise for a large-area fabrication. Recent advancements in multiple-exciton generation in NQD solutions have afforded possible efficiency improvements. Various architectures have attempted to utilize the NQDs in photovoltaics, such as NQD-sensitized solar cell, NQD-bulk-heterojuction solar cell and etc. Here we have fabricated CdSe NQDs with the band gap of 1.8 eV to 2.1 eV on thin-layers of p-type organic crystallites (1.61 eV) to realize a donor-acceptor type heterojuction solar cell. Simple structure as it was, we could control the interface of electrode-p-layer, and n-p-layer and monitor the following efficiency changes. Specifically, surface molecules adsorbed on the NQDs were critical to enhance the carrier transfer among the n-layer where we could verify by measuring the photo-response from the NQD layers only. Further modifying the annealing temperature after the deposition of NQDs on p-layers allowed higher conversion efficiencies in the device.

• Fibers and Polymers
• /
• v.7 no.3
• /
• pp.217-222
• /
• 2006

Propargyl alcohol was coupled to 2,4-hexadiyne-1,6-diol (HDD) and crystallized in the process of ultraviolet irradiation-induced topochemical polymerization. The HDD polymer crystals were used as one component in the fabrication of organic photovoltaic cells, in combination with fullerene as the electron acceptor. The various structures of the produced photovoltaic cells included bilayer, trilayer, and bulk heterojunction structures. Their photovoltaic properties were analyzed in relation to crystal structure, electrochemical properties, and band structure of the HOD polydiacetylene polymers.