• Journal of Korean Society of Water and Wastewater
• /
• v.37 no.5
• /
• pp.253-259
• /
• 2023

Bioreactors are devices used by sewage treatment plants to process sewage and which produce active sludge, and sediments separated by solid-liquid are treated in anaerobic digestion tanks. In anaerobic digestion tanks, the volume of active sludge deposits is reduced and biogas is produced. After dehydrating the digestive sludge generated after anaerobic digestion, anaerobic digested wastewater, which features a high concentration of organic matters, is generated. In this study, the decomposition of organic carbon and nitrogen was studied by advanced oxidation process. Ozone-microbubble flotation process was used for oxidation pretreatment. During ozonation, the TOC decreased by 11.6%. After ozone treatment, the TOC decreased and the removal rate reached 80.4% as a result of the Ultra Violet-Advanced Oxidation Process (UV-AOP). The results with regard to organic substances before and after treatment differed depending on the organic carbon index, such as CODMn, CODCr, and TOC. Those indexes did not change significantly in ozone treatment, but decreased significantly after the UV-AOP process as the linkage treatment, and were removed by up to 39.1%, 15.2%, and 80.4%, respectively. It was confirmed that biodegradability was improved according to the ratio of CODMn to TOC. As for the nitrogen component, the ammonia nitrogen component showed a level of 3.2×10² mg/L or more, and the content was maintained at 80% even after treatment. Since most of the contaminants are removed from the treated water and its transparency is high, this water can be utilized as a resource that contains high concentrations of nitrogen.

• Membrane and Water Treatment
• /
• v.9 no.6
• /
• pp.405-419
• /
• 2018

Persulfates (i.e., peroxymonosulfate and peroxydisulfate) are capable of oxidizing a wide range of organic compounds via direct reactions, as well as by indirect reactions by the radical intermediates. In aqueous solution, persulfates undergo self-decomposition, which is accelerated by thermal, photochemical and metal-catalyzed methods, which usually involve the generation of various radical species. The chemistry of persulfates has been studied since the early twentieth century. However, its environmental application has recently gained attention, as persulfates show promise in in situ chemical oxidation (ISCO) for soil and groundwater remediation. Persulfates are known to have both reactivity and persistence in the subsurface, which can provide advantages over other oxidants inclined toward either of the two properties. Besides the ISCO applications, recent studies have shown that the persulfate oxidation also has the potential for wastewater treatment and disinfection. This article reviews the chemistry regarding the hydrolysis, photolysis and catalysis of persulfates and the reactions of persulfates with organic compounds in aqueous solution. This article is intended to provide insight into interpreting the behaviors of the contaminant oxidation by persulfates, as well as developing new persulfate-based oxidation technologies.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.187-195
• /
• 2006

Atomic force microscope (AFM)-based anodic oxidation lithography has gained great in forests in fabricating nanometer scale features on semiconductor or metal substrates beyond the limitation of optical lithography. In this article AFM anodic oxidation lithography and its organic resist layers are introduced based on our previous works. Organic resist layers of self-assembled monolayers, Langmuir-Blodgett films and polymer films aye suggested to play a key role in enhancing the aspect ratio of producing features, the lithographic speed, and spatial precision in AFM anodic oxidation lithography.

• Journal of Environmental Science International
• /
• v.14 no.10
• /
• pp.919-928
• /
• 2005

This study introduces the development of new supercritical water oxidation(SCW)(multiple step oxidation) to destruct recalcitrant organic substances totally and safely by using sodium nitrate as an oxidant. This method has solved the problems of conventional SCW, such as precipitation of salt due to lowered permittivity, pressure increase following rapid rise of reaction temperature, and corrosion of reactor due to the generation of strong acid. Destruction condition and rate in the supercritical water were examined using Polyvinyl Chloride(PVC) and ion exchange resins as organic substances. The experiment was carried out at $450^{\circ}C$ for 30min, which is relatively lower than the temperature for supercritical water oxidation $(600-650^{\circ}C)$. The decomposition rates of various incombustible organic substances were very high [PVC$(87.5\%)$, Anion exchange resin$(98.6\%)$, Cationexchange resin$(98.0\%)$]. It was observed that hetero atoms existed in organic compounds and chlorine was neutralized by sodium (salt formation). However, relatively large amount of sodium nitrate (4 equivalent) was required to raise the decomposition ratio. For complete oxidation of PCB was intended, the amount of oxidizer was an important parameter.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.10
• /
• pp.1452-1456
• /
• 2012

The anaerobic oxidation of methane (AOM) in anaerobic sewage sludge was characterized. The net methane oxidation was observed in samples amended with methane plus sulfate or with methane alone, whereas methane formation was observed in the samples without methane, indicating that methane oxidation and formation occurred simultaneously. The ratio of the net methane oxidation rate to $H_2S$ formation was 100:1, suggesting that the AOM was not closely associated with sulfate reduction in the anaerobic sludge. The net AOM was positively associated with the methane concentration and sludge dilution ratio. However, the rate of AOM was negatively correlated with organic substrate (acetate) concentration. Therefore, the production and oxidation of methane could be controlled by environmental conditions and dissolved organic compounds in the bulk solution.

• Journal of Korean Society on Water Environment
• /
• v.34 no.4
• /
• pp.409-422
• /
• 2018

The purpose of this study is to find the characteristics of organic matters based on the distribution and oxidation rates, as noted according to the spatial and temporal variations from 2008 to 2016. Generally speaking, the Han River system is separated into one lower course and two upper courses which are the Namhan River and Bukhan River. The seasonal factor is one of the most important causes of water quality changing in both of the upper courses as a result of a few pollution sources. The concentration of organic matter was measured as higher in the lower course into which great streams with point and non-point sources were identified. According to seasonal variations, however, the change of the organic matter in the lower course is comparatively slighter than that of organic matters in the upper courses. The oxidation rates related to the BOD were 15 %, 17 % and 26 % in the Bukhan River, Namhan River and the lower course, respectively. These results could be explained that more biodegradable organic matter were seen to have existed in the lower courses comparing to the activity in the upper course. The oxidation rates of the BOD were noted as relatively higher in the eutrophicated places with phytoplankton. Therefore the BOD is one of the good index models to find the characteristic of the eutrophicated water. On the other hand BOD would not be enough to estimate concentration of refractory organic matters in the Bukhan and Namhan river. Consequently, both of the TOC and BOD are necessary indices to understand the identified refractory and/or biodegradable characteristics of organic matter.

• Journal of Environmental Impact Assessment
• /
• v.30 no.2
• /
• pp.132-139
• /
• 2021

Laboratory-scale experiments were conducted to assess the effect of oxidative decomposition of polycyclic aromatic hydrocarbons (PAHs) in field soil using peroxy-acid. The study soil texture is sandy soil containing 19.2 % of organic matter at pH 6.8. Among polycyclic aromatic hydrocarbons (PAHs) in the study soil, the concentration of benzo(a)pyrene is 2.23 mg/kg which is three times higherthan the Korea standard level. Therefore benzo(a)pyrene was selected as the target study PAH for the treatment by peroxy-acid oxidation using peroxy-acid coupled with hydrogen peroxide, and the efficiency of the oxidative decomposition of benzo(a)pyrene was assessed for the different organic acids and dosages of an organic acid and hydrogen peroxide. Propionic acid among the tested organic acids showed the highest efficiency of benzo(a)pyrene reduction in the peroxyacid oxidation treatment and finally satisfied the Korea standard level.

• The Microorganisms and Industry
• /
• v.20 no.3
• /
• pp.70-73
• /
• 1994

Effects of 13 organic compounds including glucose, fructose, xylose, glutamate, succinate, malate, glycine, lactate, acetate, pyruvate, citrate, formate and cis-aconitate on the oxidation of thiosulfate and the availability of these compounds as the substrate for the respiration by Thiobacillus ocncretivorus, which is known to be an obligated autotroph, were studied. Malate nad glycine at 0.5 per cent concentration nearly doubled the thiosulfate oxidation compared to the control. No other organic substances enhanced the thiosulfate oxidation compared to the control. No other organic substances enhanced the thiosulfate oxidation. Moreover, some 30 to 40 per cent decrease was recorded by fructose, sulfate-salts medium, some 30 to 40 per cent decrease was recorded by fructose, citrate, xylose, malate, flucose, glutamate and succinate. No respiration could occur when formate and pyruvate were supplied as the substrate for respiration. But it was obvious that flucose, fructose, xylose, glutamate, malate, citrate and succinate could be used as the substrate for respiration to some extent, regarding the fact that some increase in respiration rates could be recorded compared to the result from the salts medium, where neither thiosulfate nor orgnic compounds were added. Thus, it was postulated that this organism could possibly be converted into mixotroph or hetrotroph if appropriate conditions could be prepared.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.2
• /
• pp.7-14
• /
• 2012

Batch tests were carried out to evaluate the thermal treatment of low volatile organic compounds in low-permeability soil. The chemical oxidation by sodium persulfate catalyzed by heat and Fe (II) was evaluated. Enhanced persulfate oxidation of n-decane (C-10), n-dodecane (C-12), n-tetradecane (C-14), n-hexadecane (C-16), and phenanthrene was observed with thermal catalyst, indicating increased sulfate radical production. Slight enhancement of the pollutants oxidation was observed when initial sodium persulfate concentration increased from 5 to 50 g/L. However, the removal efficiency greatly decreased as soil/water ratio increased. It indicates that mass transfer of the pollutants as well as the contact between the pollutants and sulfate radical were inhibited in the presence of solids. In addition, more pollutants can be adsorbed on soil particles and soil oxidant demand increased when soil/water ratio becomes higher. The oxidation of the pollutants was significantly improved when catalyzed by Fe(II). The sodium persulfate consumption increased at the same time because the residual Fe(II) acts as the sulfate radical scavenger.

• Journal of Environmental Science International
• /
• v.14 no.5
• /
• pp.513-520
• /
• 2005

For the destruction of toxic chlorinated organic compounds, this study proposes improved supercritical water oxidation method (multistep oxidation) using sodium nitrate as an oxidizer. This method solves the problems involved in the existing supercritical water oxidation method. Multistep oxidation means that $NaNO_3$ is oxidized to $N_2\;via\;NaNO_2$ and NO. Toxic and hard to destroy organic substances like para-dichlorobenzen(4-DCBz), polychlorinate biphenyl(PCB) ware oxidized to non toxic substances in a condition, in which rapid pressure and temperature rise is restrained as much as possible. 4-dichlorobenzene(4-DCBz) and Polychlorinate biphenyl(PCB) in condition$(450^{\circ}C,\;p_w=0.25g/cm^3,\;30min)$ Was discomposed perfectly.