• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.1
• /
• pp.81-85
• /
• 2009

We has been analysed optical properties of OLED(organic light emitting diode) and characteristics of ITO(Indium Tin Oxide) in terms of $O_2$ plasma treatment for manufacturing high efficiency OLED, RF power of $O_2$ plasma was changed 25, 50, 100, 200 W. $O_2$ gas flow, gas pressure and treatment time were fixed. Sheet resistance and surface roughness of ITO were measured by Hall-effect measurement system and AFM, respectively. The ranges of sheet resistance and surface roughness were $5.5{\sim}6,06\;{\Omega}$ and $2.438{\sim}3.506\;nm$ changing of RF power, respectively, PM(Passive Matrix)OLED was fabricated with the structure of ITO(plasm treatment)/TPD($400\;{\AA}$)/$Alq_3(600\;{\AA})$/LiF($5\;{\AA}$)/Al($1200\;{\AA}$). Turn-on voltage of PMOLED was 7 V and luminance was $7,371\;cd/m^2$ at the RF power of 25 W, $O_2$ plasma treatment of ITO surface was result in lowering the operating voltage and improving luminance of PMOLED.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.1
• /
• pp.47-51
• /
• 2008

The Al:Au double-layer metal electrode for use in transparent, dual emission of organic light-emitting diode (OLED) was fabricated. The electrode of Al:Au metals with various thicknesses was deposited by the vacuum thermal evaporation technique. For Al thickness of 1 nm, a bottom luminance of $4880\;cd/m^2$ was observed at 8 V. Otherwise, top luminance of $2020\;cd/m^2$ were observed at 8 V. In addition, the threshold voltages of the electrodes were 2.2 V. It was forward that the inserting 1 nm Al between LiF and Au enhanced electron injection with tunneling effect.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.161-165
• /
• 2023

This paper designed a voltage feedback driving circuit to compensate for the characteristic deviation of the Active Matrix Organic Light Emitting Diode driving Thin Film Transistor. This paper describes a stable and fast circuit by applying charge sharing and polar stabilization methods. A 12-inch Organic Light Emitting Diode with a Double Wide Ultra eXtended Graphics Array resolution creates a screen distortion problem for line parasitism, and charge sharing and polar stabilization structures were applied to solve the problem. By applying Charge Sharing, all data lines are shorted at the same time and quickly positioned as the average voltage to advance the compensated change time of the gate voltage in the next operation period. A buffer circuit and a current pass circuit were added to lower the Amplifier resistance connected to the line as a polar stabilization method. The advantage of suppressing the Ringing of the driving Thin Film Transistor can be obtained by increasing the stability. As a result, a circuit was designed to supply a stable current to the Organic Light Emitting Diode even if the characteristic deviation of the driving Thin Film Transistor occurs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1464-1466
• /
• 2007

We demonstrate p-doped organic light emitting diodes (OLEDs) comprising tungsten oxide ($WO_3$) and 1,4-bis[N-(1-naphthyl)-N'-phenylamino]-4,4' diamine (NPB). We propose the NPB : $WO_3$ composition functions as a p-doping layer which significantly improves hole injection that leads to the fabrication of 4-(dicyano-methylene)-2-methyl-6-(p-dimethylaminos tyryl)-4H-pyrane (DCMl) based p-doped OLEDs with high efficiency and long lifetime.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2001.08a
• /
• pp.189-190
• /
• 2001

In this paper, we explain the materials of the advanced organic light emitting diode(OLED) for the excellent OLED displays. We have been designed the various kinds of organic materials like as the hole-injecting materials (HIMs), the hole transporting materials(HTMs). the light emitting materials(LEMs), and the electron injecting materials(EIMs). As the results, we found the excellent materials and their combinations for the OLED displays.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.100-101
• /
• 2008

We have developed low voltage driving white organic light emitting diode with new electron transport layer. The with light emission was realized with a yellow dopant, rubrene and blue-emitting DPVBi layer. The new electron transport layer results in very high current density at low voltage, causing a reduction of driving voltage. The device with new electron transport layer shows a brightness of 1000 cd/m2 at 4.3 V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1374-1377
• /
• 2005

Top-emitting organic light-emitting diode (TEOLED) was fabricated on flexible substrate of PES film. Aluminum and Chromium multilayer was used as an anode of TEOLED and the TEOLEDs of Cr(20nm)/Al(100nm)/Cr(20nm)/NPB(60nm)/Alq(60nm)/LiF(1nm)/Al(2nm)/Ag(20nm)/NPB(200nm) has been fabricated on PES film and Si wafer for control device. The TEOLED on PES film which had good anode surface morphology, showed very similar device characteristics to that on Si wafer.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.4
• /
• pp.61-66
• /
• 2010

Organic light emitting diode(OLED) has been developed fast from 1963 when electric light emitting phenomenon was discovered. PMOLED(passive matrix OLED) is producted earlier than AMOLED(active matrix OLED). PMOLED is mainly mounted at sub display, but AMOLED is mounted at main display. Nowadays AMOLED is expanded to PMP(portable multimedia players), navigation and TV market. Even thought OLED's market is opening to many applications, OLED's life is worried until now. If we know about OLED's real life, we need time to test so much time over 20,000hrs. Realistically, there is difficult to test such as long time with products from the information-technology sector having a short life cycle. In this paper, we study about OLED's accelerated test to reduce life test by current. We can design OLED's accelerated life model by the result of test. The model consists of design variables like ratio of light emitting, organic material structure, condition of aging, etc. In conclusion, this model can be applied to study about organic material, machine and manufacturing process etc, and also it's possible to develop a method of manufacturing process & materials, so we need to study on the subject of this paper continuously.

• The Journal of the Korea Contents Association
• /
• v.8 no.11
• /
• pp.18-24
• /
• 2008

An organic light-emitting diode(OLED) has advantages of low power driving, self light-emitting, wide viewing angle, excellent high resolution, full color, high reproduction, fast response speed, simple manufacturing process, or the like. However, there are still a number of challenges to get over in order to put it to practical use as a high performance display. First of all, the most important thing is to improve the efficiency of the OLED element in order to commercialize it. To this end, its efficiency can be improved by lowering the driving voltage through the improvement of structure of the OLED element and the application of new organic substance. Therefore, in this study, we have manufactured a red OLED element by applying fluorescent dyes to the emitting layer of the element having the structure of ITO/TPD/ Znq2+DCJTB /Znq2/Al and the structure of ITO/CuPc/NPB/ Alq3+DCJTB/Alq3/Al, in order to light-emitting various colors or improve the brightness and the efficiency, and then we have evaluated its electrical and optical characteristics.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.301-305
• /
• 2008

An organic light-emitting diode(OLED) has advantages of low power driving, self light-emitting, wide viewing angle, excellent high resolution, full color, high reproduction, fast response speed, simple manufacturing process, or the like. However, there are still a number of challenges to get over in order to put it to practical use as a high performance display. First of all, the most important thing is to improve the efficiency of the OLED element in order to commercialize it. To this end, its efficiency can be improved by lowering the driving voltage through the improvement of structure of the OLED element and the application of new organic substance. Therefore, in this study, we have manufactured a red OLED element by applying fluorescent dyes to the emitting layer of the element having the structure of ITO/TPD/Znq2+DCJTB/Znq2/Al and the structure of ITO/CuPc/NPB/Alq3+DCJTB/Alq3/Al, in order to light-emitting various colors or improve the brightness and the efficiency, and then we have evaluated its electrical and optical characteristics.