• Journal of the Korean Ceramic Society
• /
• v.31 no.3
• /
• pp.291-297
• /
• 1994

Cordierite powders were prepared by controlled hydrolysis of metal alkoxides with catalysts in water medium without using organic solvents. Water was adjusted to a certain pH by HC1 and NH4OH. $\alpha$-Cordierite powder was prepared from aluminum isopropoxide, tetraethyl orthosilicate and magnesium ethoxide mixed with water adjusted to pH of 3. At water pH of 11, $\alpha$-cordierite, mullite and $\beta$-quartz phases were coexisted. The powders were freeze dried, calcined and then fired at different temperatures. The characteristics of powders were examined by means of DTA, X-ray diffraction, FT-IR, and electron microscopy. It was found that $\alpha$-cordierite could be synthesized at temperature of 120$0^{\circ}C$ from the powders prepared by alkoxides with water medium without organic solvents.

• Carbon letters
• /
• v.23
• /
• pp.55-62
• /
• 2017

We report on the dispersion state of partially reduced graphene oxide (PRGO) in organic solvents, namely methyl ethyl ketone, ethyl acetate, methylene chloride, toluene, and xylene, by controlling the carbon to oxygen (C/O) atomic ratio of the PRGOs. A two-phase solvent exchange method is also proposed to transfer PRGO from water to an aprotic solvent, such as methyl ethyl ketone. We achieve relatively good dispersion in aprotic and non-polar solvents by controlling the C/O atomic ratio of the PRGOs and applying the two-phase solvent exchange method. There is an increase in the glass transition temperatures with the dispersion of PRGOs into amorphous polymers, in particular a $4.4^{\circ}C$ increase for poly(methyl methacrylate) and $3.0^{\circ}C$ increase for polycarbonate. Good dispersion of PRGO in a nonpolar polymer, such as linear low density polyethylene, is also obtained.

• KSBB Journal
• /
• v.13 no.2
• /
• pp.119-124
• /
• 1998

Twelve bacterial strains capable of growing on phenol minimal medium were isolated from iron foundry activated sludge by enrichment culture, and amount them, one isolate which was the best in cell growth and phenol degradation was selected and identified as Acinetobacter junii POH. The optimal temperature, initial pH and phenol concentration in the above medium were 3$0^{\circ}C$, 7.5 and 1000 ppm, respectively. Cell growth of Acinetobacter junii POH dramatically increased 20 hrs cultivation-time and reached a almost stationary phsae 40 hrs cultivation-time then phenol was degraded about 98%. Cell growth was inhibited y phenol at concentrations over 1500 ppm. The isolate was resistant to several antibiotics as well as various heavy metal ions. The growth-limiting log P value of Acinetobacter junii POH on organic solvents was 2.9 in the LB medium. Therefore, it is suggested that Acinetobacter junii POH could be effectively used for the biological treatment of wastewater containing the presence of heavy metal ions and organic solvents.

• Journal of the Korean Ceramic Society
• /
• v.50 no.4
• /
• pp.294-300
• /
• 2013

The effect of chemical treatments of porous silicon in organic solvents on its nanostructural and optical features was investigated. When the porous Si was dipped in the organic solvent with various PH values, the morphological, chemical, and structural properties of the porous silicon was sensitively affected by the chemical conditions of the solvents. The size of silicon nanocrystallites in the porous silicon decreased from 5.4 to 3.1 nm with increasing pH values from 1 to 14. After the samples were dipped in the organic solvents, the Si-O-H bonding intensity was increased while that of Si-H bonding decreased. Photoluminescence peaks shifted to a shorter wavelength region in the range of 583 to 735 nm as the pH value increased. PL intensity was affected by the size as well as the volume fraction of the nanocrystalline silicon in the porous silicon.

• Journal of Preventive Medicine and Public Health
• /
• v.16 no.1
• /
• pp.31-34
• /
• 1983

For the study of the applicability of predictive equation of subjective symptoms of workers using organic solvents, 67 male workers using organic solvents were selected. The predictive equation was quotated from previous Cheon's study. All the datas of necessary variables were gained. The predictive values and observed values were compared. The results were summarized as below; 1. The difference between predictive values and observed values were characteristically large. The coefficient of determination between the two values was 0.0024. 2. The $R^2$ value of multiple stepwise regression equation derived from present study was 0.2827.

• Journal of Bio-Environment Control
• /
• v.19 no.3
• /
• pp.147-152
• /
• 2010

Poor fruit set during winter period is one of the biggest problem in plastic tunnel watermelon cultivation. Hand pollination is inevitable to maximize fruit set of the winter watermelon. Productivity and viability of pollen grain and organic solvents for pollen storage were investigated. All cultivars produced more than 10 mg/flower except for 'Kumchun' cultivar. Pollen amount per flower were 13.8 mg in 'Bok' and 12.1 mg in 'Speedkul'. Germination rate of pollen grains incubated at $30^{\circ}C$ right after soaking in pentane solvent were 76% in 'Kumchun' as the lowest and 92% in 'Apollokul' as the highest. The pollen of 'Bok' showed the highest germination rate by 75% after a 15-day storage in pentane. All cultivars showed their pollen germination rate below 25% after a 24-day storage. Among the cuitivars, speed of pollen tube growth in vitro were relatively lower in 'Kumchun' and 'Sambokkul' by below $50\;{\mu}m/hr$. Pollen tube of these cultivars tended to burst during its elongation on the medium. Pollen stored 24 hrs in organic solvents showed 45, 39, 34, 23, and 19% of germination in pentane, ethyl ether, n-hexane, ethyl acetate, and acetone, respectively. Compared with light condition, pollen viability was higher in darkness during pollen storage in organic solvents. Pollen grain was susceptible to the organic solvent. The viability of pollen grains seems to be influenced greatly by duration of soaking pollen in organic solvent and the polarity of solvents. Organic solvent damages surface of pollen grain and extent of damage was varied by the solvents.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.11 no.3
• /
• pp.219-228
• /
• 2001

Objective : For the purpose of preparing the fundamental data and health promotion and control program on organic solvents in air of manufacturing industry. Methods : The author surveyed number of organic solvent components which was used in working site and also determined the organic solvents concentration in air of 927 manufacturing industries and 1,267 working process with gas chromatography(NIOSH manual) for five years from 1995 to 1999. Results : Mean number of solvents components by type of industry, working process was number of 12. There were exceeded to TLV of 1,2-dichloroethane in textile manufacturing industry N,N-dimethyl furan in tanning and dressing of leather ; luggage, handbags, saddlery, harness and footwear manufacturing industry and chemical and chemical product manufacturing industry by type of industry. There were exceeded to TLV of 1,2-dichloroethane in handwriting and drawing process, cellosolve in adhesive spreading process, N,N-dimethly furan in production of solvent process and adhesion process by working process Total exceeded rate to threshold limit values of organic solvents mixture were 12.9% for EI(Exposure index) and 10.0% for Em(Estimation of mixture) by type of industry, 11.3% for EI and 8.2% for Em by type of working process. The highest exceed rate was 36.7% for EI in tanning and dressing of leather ; luggage handbags, saddlery, harness and footwear manufacturing industry and 29.0% for Em in textile manufacturing industry. The highest exceeded rate was 23.1% for EI and 12.5% for Em in adhesive spreading process by working process. Mean values of total subjects by type of industry and type of working process were $0.7{\pm}1.8$ for EI and $0.7{\pm}1.7$ for Em respectively. Conclusions : As above results, the author suggest that it makes the environmental control program on 1.2-dichloroethane, N,N-dimethyl furan, cellosolve by kind of organic solvent and on textile manufacturing industry, tanning and dressing of leather ; luggage, handbags, saddlery harness and footwear manufacturing industry by type of industry, and on handwriting, drawing process and adhesive spreading process and adhesion process by type of working process.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.3 no.2
• /
• pp.166-176
• /
• 1993

In order to investingate the renal dysfunction in workers exposed to aromatic organic solvents, 105 male exposed workers and 109 controls were participated in this study. This study was conducted to examine the correlation among the concentration of aromatic organic solvents in air, worker's urinary NAG activity and urinary hippuric acid. The results were as follows : 1. The exposure level of aromatic organic solvent mixture caculated by the equation proposed by ACGIH was ranged from 0.27 to 0.54 and toluene concentration was ranged from 18.3ppm to 48.3ppm. 2. NAG activity in the urine of control and exposed group were $36.1{\pm}14.2nmolMU/mg$ creatinine and $52.4{\pm}26.1nmolMU/mg$ creatinine, respectively. Hippuric acid concentration in the urine of control and exposed group were $191.1{\pm}194.2mg/g$ creatinine and $789.3{\pm}784.1mg/g$ creatinine, respectively. 3. Correlation coefficent between the exposure level of aromatic organic solvent mixture was significantly related to urinary NAG activity(r=0.542) and urinary hippuric acid(r=0.752). 4. Correlation coefficient between NAG activity and hippuric acid concentration was 0.357. This study suggested that urinary NAG activity was a good renal function index for aromatic organic solvents exposure and urinary hippuric acid was an index for the biological monitoring of toluene exposure.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.353-356
• /
• 2001

The relation between the flocculation and dispersion of metal oxide powders and the properties of solvents, such as dielectric constant and solubility parameter, was investigated for TiO$_2$, $Al_2$O$_3$and Fe$_2$O$_3$particles. The particle size and median diameter of these metal oxides were measured in many organic solvents, from which the effect of solvents on the flocculation and dispersion of metal oxide powders was considered. The metal oxide powders of TiO$_2$, $Al_2$O$_3$and Fe$_2$O$_3$tend to disperse in a solvent of higher polarity, whereas they are apt to flocculate in a solvent of low dielectric constant, because the Hamaker constant between the particles becomes larger in such a solvent. There we, however, some solvents that do not obey these tendencies. It is possible to evaluate the flocculation and dispersion of these metal oxide powders in many solvents by using numeral balances of Hansen’s three-dimensional solubility parameter (f$_{d}$, f$_{p}$ and f$_{h}$). There exists a solvent giving the optimal dispersion for each metal oxide, and the optimal dispersion point of f$_{d}$, f$_{p}$ and f$_{h}$ is determined by the combination of various metal oxide powders and solvents.nts.nts.nts.

• Archives of Pharmacal Research
• /
• v.3 no.1
• /
• pp.1-6
• /
• 1980

As part of our endeavor to increase the productivity of steroid by enzymatic transformation of corticosteroids, attempts have been made to increase the solubility of steroids by using some organic solvents. When the solubility of steroids is the rate limiting factor in the steroid transformation, it was found that the use of solvents significantly improved the yield. Hydrocorisone as a substrate and 3-ketosteroid .DELTA.$^{1}$ dehydrogense as an immobilized whole cell enzyme were employed as the model system for this study. It was found that the yield of product, prodnisolone, goes through a maximum with an increase in the solvent concentration. At a high solvent concentration, the solvent showed a toxic effect and it causes a decrease in the product yield by the second order inhibition mechanism. Among the solvents evaluated, methanol and ethanol were found to be the best. These alcohols are not only good solvents but also showed minimal toxic effect. Based on the experimental results, it was concluded that the productivity of steroid can be increased by usign well selcted solvents systems for the enzymatic transformation of steroids.