• Journal of the Korean Applied Science and Technology
• /
• v.19 no.2
• /
• pp.103-107
• /
• 2002

Diphosphine dinuclear gold(I) complexes were synthesized from the reaction of bridged diphosphines and gold ions. As a bridged diphosphine, 1,2-bis(diphenylphosphino)metbane (dppm) or 1,1'-Bis(diphenylphosphino) ferrocene (dppf) was introduced. As anionic ligands, CI was first coordinated to Au, resulting in (diphosphine)$(AuCl)_{2}$. Then, the ligand, SPh, was substituted for Cl in the chloride complex to give (diphosphine)$(AuSPh)_{2}$. As a result, three digold complexes, (dppm)$(AuCl)_{2}$. (I), (dppf)$(AuCl)_{2}$. (II), and (dppf)$(AuSPh_{2}$. (III) were prepared in this study. The thermal properties were investigated at first hand to confirm that the gold complexes were in fact formed. The digold complexes were decomposed above $200^{\circ}C$ while the ligand, dppm or dppf, melts under $180^{\circ}C$ The photoluminescence (PL) spectra of the spin-coated thin films showed the maximum peak at 590, 595, and 540nm for the complex, I, II, and III, respectively. These complexes were found to give the orange color phosphorescence. Therefore, these digold complexes can be candidates for orange-red phosphorescent materials in organic electroluminescent devices (OELD). Further studies on application of the complexes as a dopant in an emitting layer are in progress in our laboratory.

• Journal of the Korea Convergence Society
• /
• v.10 no.1
• /
• pp.285-290
• /
• 2019

AHR regulates the expression of xenobiotics metabolizing enzymes (XMEs) as a transcription fact upon binding of ligands that are mainly aryl hydrocarbons. The role of AHR in human physiology has been intensively investigated for the past decades, however our understanding on AHR yet to be elucidated largely due to the lack of proper chemical agents. It has been demonstrated that AHR correlates to pathogenesis for some diseases in recent studies suggesting that the study on the AHR may provide a valid therapeutic target. Classical antagonists in current use are reported to be partially agonistic whereas a pure antagonist is yet to be found. In this study, phenyldiazenylaniline has been designed based on the structure of two known AHR antagonist, Resveratrol and CH223191. The derivatives of phenyldiazenylaniline have been prepared and subjected to assessment as an AHR antagonist in order to optimize the AHR antagonistic activity of the designed structure by means of convergence study of organic synthesis and molecular biology.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.7 no.2
• /
• pp.25-34
• /
• 1999

The effects of copper on the anaerobic degradation of propionate were studied using anaerobic batch reactors. The apparent inhibitory effects of copper on the anaerobic degradation of propionate could be observed from behaviors of intermediates, ultimate methane yield(UMY) and specific methanogenic activity(SMA) There was little inhibition at the concentration of $2.5mg\;Cu^{2+}/L$. Beyond this concentration, the inhibitory effects increased with increasing dose of coppers. The 50% inhibition of UMY and SMA occurred at copper dosage of 33.8 and $24.1mg\;Cu^{2+}/gVSS$, respectively. The inhibitory effect based on the UMY was gradually reduced with the operation time dueprobably to the acclimation of microorganisms and/or binding of the added copper by ligands(and possibly ion exchange sites)contained on the cell membrane and extracellular polymer matrix whereas it based on the SMA might exclude the this phenomena. Therefore, the methodology for interpretation of inhibition data based on the SMA was more accurated than the UMY. There was no inhibitory effect in batch reactors supplemented with sulfate due to an antagonistic action of the sulfate reducing bacteria. Propionate degradation was initially retarded for copper inhibited samples but it gradually degraded afterward. Based on the mass removal considering take into account the propionate to acetate conversion, propionate degradation may appeal more affected than acetate. This result revealed that the hydrogenotrophic methanogens were the most affected by copper.

• Journal of the Korean Chemical Society
• /
• v.40 no.6
• /
• pp.445-452
• /
• 1996

Catalytic hydrogenation of ketones and aldehydes by RuH(NO)$L_3$ ($L_3$: $PPh_3$, PhP($CH_2CH_2PPh_2$)$_2$(etp)) was investigated to examine the reaction mechanism and the competence of hydridonitrosyl complexes as catalysts for organic synthesis. RuH(NO)$L_3$ showed catalytic activity for the hydrogenation and the activities of catalysts were dependent on the steric and electronic factors. The less the steric demands of the substrates become, the more activity the catalysts show. For the electronic effect, the more the partial positive charge on the carbonyl carbon atom in ketones becomes and the more the double bond character of carbonyl group in aldehydes becomes, the more active the catalysts are. These results reflect the difference of reaction mechanisms of two substrates, ketones and aldehydes. Catalytic activities of RuH(NO)(etp) and RuH(NO)($PPh_3$)$_3$ in the presence of extra $PPh_3$ toward hydrogenation showed the existence of a reaction pathway accompanied with the change of the bonding modes of NO ligand. The roles of excess $PPh_3$ change with increase of the mole ratio of $PPh_3$ to catalysts; prevention of ligand dissociation from comlexes → bases → ligands. The activity of RuH(NO)(etp) was lower than that of RuH(NO)($PPh_3$)$_3$ toward the hydrogenation of the same substrates mainly due to the structural difference. These catalysts showed the selectivity toward olefin hydrogenation over carbonyl groups in the competitive reaction.

• Journal of the Korean Chemical Society
• /
• v.17 no.3
• /
• pp.174-181
• /
• 1973

Dichlorodiacetatotitanium(IV) dissolves in alcohols with chemical reaction. Such solvolytic reaction of $TiCl_2(OAc)_2$with various alcohols has been studied by means of solution NMR spectroscopy and chemical analysis of the isolated products. The reaction of $TiCl_2(OAc)_2$ with primary alcohols has shown to be a quantitative two-step ligand substitution process as shown in the following: $TiCl_2(OAc)_2+ROH{\to}TiCl_2(OAc)_2(OR)+AcOH$ $TiCl_2(OAc)_2(OR)+ROH{\to}TiCl_2(OAc)_2+AcOH$The molecular form initially soluble in organic solvents has been found to be the monosubstituted species $TiCl_2(OAc)(OR)$. Alcoholysis with t-butyl alcohol has shown remarkable differences. When the mole ratio of t-butyl alcohol to $TiCl_2(OAc)_2$ is less than 1/2, the following reaction is dominant. $TiCl_2(OAc)_2+t-ButOH{\to}TiCl_2(OAc)_2+t-ButCl$However, at higher mole ratio another substitution process resembling the first step reaction with primary alcohols is competitively accompanied. The reaction with t-butyl alcohol also differs from that with primary alcohols in that only one either of the two chloro-or acetato-ligands in $TiCl_2(OAc)_2$ is subjected to substitution.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.363-363
• /
• 2014

Ruthenium (Ru) has attractive material properties due to its promising characteristics such as a low resistivity ($7.1{\mu}{\Omega}{\cdot}cm$ in the bulk), a high work function of 4.7 eV, and feasibility for the dry etch process. These properties make Ru films appropriate for various applications in the state-of-art semiconductor device technologies. Thus, it has been widely investigated as an electrode for capacitor in the dynamic random access memory (DRAM), a metal gate for metal-oxide semiconductor field effect transistor (MOSFET), and a seed layer for Cu metallization. Due to the continuous shrinkage of microelectronic devices, better deposition processes for Ru thin films are critically required with excellent step coverages in high aspect ratio (AR) structures. In these respects, atomic layer deposition (ALD) is a viable solution for preparing Ru thin films because it enables atomic-scale control of the film thickness with excellent conformality. A recent investigation reported that the nucleation of ALD-Ru film was enhanced considerably by using a zero-valent metallorganic precursor, compared to the utilization of precursors with higher metal valences. In this study, we will present our research results on the synthesis and characterization of novel ruthenium complexes. The ruthenium compounds were easy synthesized by the reaction of ruthenium halide with appropriate organic ligands in protic solvent, and characterized by NMR, elemental analysis and thermogravimetric analysis. The molecular structures of the complexes were studied by single crystal diffraction. ALD of Ru film was demonstrated using the new Ru metallorganic precursor and O2 as the Ru source and reactant, respectively, at the deposition temperatures of $300-350^{\circ}C$. Self-limited reaction behavior was observed as increasing Ru precursor and O2 pulse time, suggesting that newly developed Ru precursor is applicable for ALD process. Detailed discussions on the chemical and structural properties of Ru thin films as well as its growth behavior using new Ru precursor will be also presented.

• Journal of the Korean Chemical Society
• /
• v.35 no.5
• /
• pp.512-519
• /
• 1991

The axial ligations of nitrogenous bases (pyridine, imidazole, 1-methylimidazole and 2,6-lutidine) to Zn(II)-, Cu(II)-, and Ni(II)-tetrakis(o-chlorophenyl)porphyrin(o-ClTPP), and -tetraphenylporphyrin (TPP) were investigated in organic solvents $(CH_2Cl_2,\;C_6H_6,\;CH_3NO_2,\;(CH_3)_2CO,\;CHCl_3,\;DMF\;and\;DMSO)$ and at 0.01M of ionic strength. The equilibrium constants for the ligation reactions of methalloporphyrins were determined using spectrophotometric method at 15∼35${\circ}C$. In case of M(II)-TPP the equilibrium constants K were considerably larger than those of M(II)-(o-Cl)TPP, depending on steric effect of the porphyrin. The linear relationships between logK of the axial ligation and $pK_a$ of nitrogenous base were shown in M(II)-TPP, but not in M(II)-(o-Cl)TPP. The stabilities of MTPP(L) were controlled by the reation enthalpy and entropy, while those of M(o-Cl)TPP almost by the reaction entropy. The coordinating power of solvent to the methalloporphyrin were also studied in $CHCl_3,\;(CH_3)_2CO$, DMF and DMSO. From those results the solvent effects on the equilibrium constants were discussed.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.65-65
• /
• 2012

Copper zinc tin sulfide ($Cu_2ZnSnS_4$, CZTS) is a very promising material as a low cost absorber alternative to other chalcopyrite-type semiconductors based on Ga or In because of the abundant and economical elements. In addition, CZTS has a band-gap energy of 1.4~1.5eV and large absorption coefficient over ${\sim}10^4cm^{-1}$, which is similar to those of $Cu(In,Ga)Se_2$(CIGS) regarded as one of the most successful absorber materials for high efficient solar cell. Most previous works on the fabrication of CZTS thin films were based on the vacuum deposition such as thermal evaporation and RF magnetron sputtering. Although the vacuum deposition has been widely adopted, it is quite expensive and complicated. In this regard, the solution processes such as sol-gel method, nanocrystal dispersion and hybrid slurry method have been developed for easy and cost-effective fabrication of CZTS film. Among these methods, the hybrid slurry method is favorable to make high crystalline and dense absorber layer. However, this method has the demerit using the toxic and explosive hydrazine solvent, which has severe limitation for common use. With these considerations, it is highly desirable to develop a robust, easily scalable and relatively safe solution-based process for the fabrication of a high quality CZTS absorber layer. Here, we demonstrate the fabrication of a high quality CZTS absorber layer with a thickness of 1.5~2.0 ${\mu}m$ and micrometer-scaled grains using two different non-vacuum approaches. The first solution-processing approach includes air-stable non-toxic solvent-based inks in which the commercially available precursor nanoparticles are dispersed in ethanol. Our readily achievable air-stable precursor ink, without the involvement of complex particle synthesis, high toxic solvents, or organic additives, facilitates a convenient method to fabricate a high quality CZTS absorber layer with uniform surface composition and across the film depth when annealed at $530^{\circ}C$. The conversion efficiency and fill factor for the non-toxic ink based solar cells are 5.14% and 52.8%, respectively. The other method is based on the nanocrystal dispersions that are a key ingredient in the deposition of thermally annealed absorber layers. We report a facile synthetic method to produce phase-pure CZTS nanocrystals capped with less toxic and more easily removable ligands. The resulting CZTS nanoparticle dispersion enables us to fabricate uniform, crack-free absorber layer onto Mo-coated soda-lime glass at $500^{\circ}C$, which exhibits a robust and reproducible photovoltaic response. Our simple and less-toxic approach for the fabrication of CZTS layer, reported here, will be the first step in realizing the low-cost solution-processed CZTS solar cell with high efficiency.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.3
• /
• pp.195-207
• /
• 2000

Organic and inorganic characteristics including bacterial cell number, enzyme activity, nutrients, and heavy metals have been monitored in twelve acrylic experimental tanks for two weeks to estimate and compare self-purification capacities in two Korean wet-land environments, tidal flat and rice field, which are possibly different with the environments in other countries because of their own climatic conditions. FW tanks, filled with rice field soils and fresh water, consist of FW1&2 (with paddy), FW3&4 (without paddy), and FW5&6 (newly reclaimed, without paddy). SW tanks, filled with tidal flat sediments and salt water, are SW1&2 (with anoxic silty mud), SW3&4 (anoxic mud), and SW5&6 (suboxic mud). Contaminated solution, which is formulated with the salts of Cu, Cd, As, Cr, Pb, Hg, and glucose+glutamic acid, was spiked into the supernatent waters in the tanks. Nitrate concentrations in supernatent waters as well as bacterial cell numbers and enzyme activities of soils in the FW tanks (except FW5&6) are clearly higher than those in the SW tanks. Phosphate concentrations in the SW1 tank increase highly with time compared to those in the other SW tanks. Removal rates of Cu, Cd, and As in supematent waters of the FW5&6 tanks are most slow in the FW tanks, while the rates in SW1&2 are most fast in the SW tanks. The rate for Pb in the SW1&2 tanks is most fast in the SW tanks, and the rate for Hg in the FW5&6 tanks is most slow in the FW tanks. Cr concentrations decrease generally with time in the FW tanks. In the SW tanks, however, the Cr concentrations decrease rapidly at first, then increase, and then remain nearly constant. These results imply that labile organic materials are depleted in the FW5&6 tanks compared to the FW1&2 and FW3&4 tanks. Removal of Cu, Cd, As from the supernatent waters as well as slow removal rates of the elements (including Hg) are likely due to the combining of the elements with organic ligands on the suspended particles and subsequent removal to the bottom sediments. Fast removal rates of the metal ions (Cu, Cd, As) and rapid increase of phosphate concentrations in the SW1&2 tanks are possibly due to the relatively porous anoxic sediments in the SW1&2 tanks compared to those in the SW3&4 tanks, efficient supply of phosphate and hydrogen sulfide ions in pore wates to the upper water body, complexing of the metal ions with the sulfide ions, and subsequent removal to the bottom sediments. Organic materials on the particles and sulfide ions from the pore waters are the major factors constraining the behaviors of organic/inorganic elements in the supernatent waters of the experimental tanks. This study needs more consideration on more diverse organic and inorganic elements and experimental conditions such as tidal action, temperature variation, activities of benthic animals, etc.

• Microbiology and Biotechnology Letters
• /
• v.37 no.3
• /
• pp.248-257
• /
• 2009

The inhibitors against Vibrio harveyi quorum sensing (QS) signaling were developed by modifying the molecular structure of the major signal, N-3-hydroxybutanoyl-L-homoserine lactone (3-OH-$C_4$-HSL). A series of structural derivatives, N-(3-hydroxysulfonyl)-L-homoserine lactones (HSHLs) were synthesized by the solid-phase organic synthesis method. The in vivo QS inhibition by these compounds was measured by a bioassay system using the V. harveyi bioluminescence, and all showed significant inhibitory effects. To analyze the interaction between these compounds and LuxN, a 3-OH-$C_4$-HSL receptor protein of V. harveyi, we tentatively determined the putative signal binding domain of LuxN based on the sequence homology with other acyl-HSL binding proteins, and predicted the partial 3-D structure of the putative signal binding domain of LuxN by using ORCHESTRA program, and further estimated the binding poses and energies (docking scores) of 3-OH-$C_4$-HSL and HSHLs within the domain. In comparison of the result from this modeling study with that of in vivo bioassay, we suggest that the in silica interpretation of the interaction between ligands and their receptor proteins can be a valuable way to develop better competitive inhibitors, especially in the case that the structural information of the protein is limited.