• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.197-206
• /
• 2000

The deposition characteristics of MOCVD Cu using the (hfac)Cu(1,1-COD)(1,1,1,5,5,5-hexafluoro-2,4-pentadionato Cu(I) 1,5-cyclooctadine) have been investigated in terms of the effects of carrier gas such as hydrogen and argon as well as the effects of H(hfac) ligand addition. MOCVD Cu using a hydrogen carrier gas led to a higher deposition rate and lower resistivity than an argon carrier gas system. The improvement in the surface roughness of the MOCVD Cu films and the (111) preferred orientation texture was obtained by using a hydrogen carrier gas. However, the adhesion characteristics of the films showed relatively weaker compared to the Ar carrier gas system, probably due to the larger amount of F content in the films, which was confirmed by the AES analyses. When an additional H(hfac) ligand was added, the deposition rate was significantly enhanced in the case of an argon + H(hfac) carrier gas system while significant change in the deposition rate of MOCVD Cu was not observed in the case of the hydrogen carrier gas system. However, the addition of H(hfac) in both carrier gases led to lowering the resistivity of the MOCVD Cu films. In conclusion, this paper suggests the deposition mechanism of MOCVD Cu and is expected to contribute to the enhancement of smooth Cu films with a low resistivity by manipulating the deposition conditions such as the carrier gas and addition of H(hfac) ligand.

• The Journal of the Korean dental association
• /
• v.57 no.10
• /
• pp.560-568
• /
• 2019

Purpose: This study evaluated the antibacterial effects of curcuma, ginger, and finger root extracts in water-soluble powder on planktonic Streptococcus mutans(S.mutans), which is known to cause dental caries, in order to confirm whether these extracts could perform as photosensitizers for the effects of photodynamic therapy (PDT). Methods: This study used the strain of streptococcus mutans ATCC 25175 distributed by the Korean Collection for Type Cultures of the Korea Research Institute of Bioscience & Biotechnology. Commercial edible curcuma, ginger and finger root were used as the natural extracts for the use of photosensitizer. To extract organic solvent, 3 g of each powder was mixed in $30m{\ell}$ of dimethyl sulfoxide (DMSO, VWR, Germany) before extraction. $1.8m{\ell}$ of the photosensitizer solution, manufactured in the concentrations of 5, 0.5, and $0.05mg/m{\ell}$, was mixed with $0.2m{\ell}$ of the S. mutans culture medium that had been cultured for 2 days. To induce the photodynamic reaction, Qraycam (AIOBIO, Seoul, Korea) equipped with 405 nm LED was used to expose light for 5 minutes to irradiate 59 nW energy for 300 seconds. Results: Compared with the case with no light, a higher photodynamic therapeutic effect was confirmed with $0.05mg/m{\ell}$ curcuma powder extract, the concentration of $0.5mg/m{\ell}$ and LED light of 405 nm wavelength (p=0.000, p=0.003). $0.05mg/m{\ell}$ of curcuma powder extract and the concentration of $0.5mg/m{\ell}$ showed 100% antibacterial effect when exposed to light, whereas the concentration of $5mg/m{\ell}$ showed 11.95% antibacterial effect. When exposed to light, $0.05mg/m{\ell}$ of ginger powder extract showed an antibacterial effect which didn't statistically decrease. The concentrations of $0.5mg/m{\ell}$ and $5mg/m{\ell}$ did not show any antibacterial effects. As a result of examining any photodynamic therapeutic effects of finger root powder extract on S. mutans, no statistically significant effect was found. Conclusion: The curcuma powder extract is expected to perform as a photosensitizer. Even though belonging to the same ginger family, ginger powder and finger root powder seem difficult to perform as photosensitizer.

• Korean Journal of Organic Agriculture
• /
• v.21 no.4
• /
• pp.659-668
• /
• 2013

The objective of this study was carried out to elucidate the effect of LEDs (light emitting diodes) irradiation in relation to early growth and inorganic elements in leaf lettuce (Lactuca sativa L. 'Chung Chi Ma'). In morphological changes of leaves, shoot elongation and hypocotyl length showed poor growth in red light irradiation, while the red+blue light irradiation induced shorter plant height and much greater leaf numbers resulting in increased fresh weight. In change of the Hunter's color and SPAD values, lettuce seedlings grown under in red+blue and fluorescent light irradiation had a higher $a^*$ value, otherwise SPAD values were not changed in these light irradiations. Interestingly, relative chlorophyll contents showed 1.8 times increased redness in the treatment of red+blue light irradiation. Inorganic element (N, Ca, Mg, Mn, and Fe) and ascorbic acid contents were increased in lettuce plants grown under LEDs light irradiation compared to those of lettuce grown under the fluorescent light which showed higher P and Mn contents. In conclusion, it is considered that red+blue light irradiation which stimulates growth and higher nutrient uptake in leaf lettuce could be employed in containers equipped with LEDs.

• Journal of Life Science
• /
• v.28 no.7
• /
• pp.864-873
• /
• 2018

There has been increasing attention and research in various nanoparticle applications. Nanoparticles have been used for a variety of purposes in different departments including but not limited to cosmetics, food, machinery, and chemical. A highly sought-after field to use nanoparticles, especially natural or artificial silver nanoparticles (SNPs), is the utilization of their significant antimicrobial properties in daily items such as fabrics, indoor air filters, and, water filtration units where abundant bacterial and fungal growth are inevitable. These applications of SNPs, however, have enabled continuous human exposure and hence paved the way for potential SNP toxicity depending on exposure method and particle size. This potential toxicity has led to researches on safer antimicrobial solutions to be utilized in textile and filtration. In this context, products of natural origin have gained expanding interest due to their eco-friendly, cost-effective, and biologically safe properties along their promising antibacterial and antifungal activities. Natural product-applied fabrics and filters have been shown to be comparable to those that are SNP-treated in terms of ease production, material durability, and antimicrobial efficiency. This article summarizes and assesses the current state of in vitro and in vitro toxicity of SNPs and discusses the potential of natural products as an alternative.

• Journal of Sericultural and Entomological Science
• /
• v.27 no.1
• /
• pp.24-30
• /
• 1985

The effect of some organic solvents on interrupting diapause of Bombyx mori eggs was examined to provide a clue to the mechanism of diapause initiation. Methyl alcohol and benzene proved to be efficient in developing the prospective diapause eggs upto the stage of hatching or body pigmentation of the embryos. On the other hand, most of the eggs soaked in chloroform and mixture solution of chloroform-methyl alcohol (2:1) died in the early embryonic developmental stage with yellow or red brown colours, and the egg weights decreased upto ca. 40% of the original weight 8 days after the treatments. Methyl alcohol treatment for 2, 5 and 10 min to the 5hr-old-eggs led to empergence of the larvae, with high incidence (70∼80%) in the race of Kumchu X Chonghwa and with low indidence (1∼4%) in Daezo. The effect of same treatment to 20hr old eggs decreased to ca. 10% in the emergence of larvae in Kumchn X Chonghwa and increased to 20∼30% in Daezo, while the effect disappeared shortly after the diapause initiation (48hr-old-eggs). Considering the high dependency upon the egg age of the sensitivity to solvents, it was supposed that initiation and termination of diapause may be controlled by different mechanism. It was also suspected that the solvents exert their effect on the permeability of the eggshell.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.2
• /
• pp.67-74
• /
• 2016

This study was purposed to evaluate the characteristic changes of the solidified livestock manure fuel(SLMF) through the application of compression treatment process. The compression process led to an increase of VS/TS ratio (Volatile solids/Total solids ratio) and moisture removal effect of SLMF. The amount of leachate withdrawn from dairy cattle manure and Hanwoo manure by compression were 21~26%(w/w) and 15~20%(w/w), respectively. The specific gravity of the leachate of dairy cattle manure and Hanwoo manure were 1.01 and 0.99, respectively. The dehydrated cow manure was easily processed into ball-shaped solidified fuel. The drying time of the SLMF was proportional to the diameter of the solidified fuel. The highest heating value was observed in diameter range of 10~15mm SLMF. It is concluded that the higher heating value of 10~15mm SLMF was related with the amount of fibrous matter contained in the SLMF.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.22 no.4
• /
• pp.28-44
• /
• 2014

Due to development of the national economy growth, livestock goods consumption has rapidly increased over the past 30 years. It has led livestock breeders to increase their livestock numbers. An increased number of livestock have consequently resulted in an increasing animal feces generation. According to the agricultural statistics provided by the Bureau of Statistics, livestock manure amounts to 47,235 thousand tons in 2013. To treat livestock manure, various types of treatment facilities like composting, liquid fertilization, purification, and anaerobic digestion facilities are being applied. In composting facility, there are four kinds of agitation system: escalator, paddle, screw and rotary type. In case of liquid fertilization process, there are two types of system: aeration and anoxic type. There are about 8,000 liquid fertilization facilities for treatment livestock manure in Korea. For purification of livestock manure, the treatment process is divided by three steps: Solid/Liquid separation process, Secondary purification process and advanced oxidation process. About 21 thousand tons of livestock manure was treated by anaerobic digestion facility in 2012. In every type of facility for livestock manure treatment, it is very important to choose the optimal deodorization equipment for the livestock manure treatment facility. In this study, the investigation has been carried out for six years to analyse the characteristics of livestock manure treatment facilities and related technique of Korea.

• Korean Journal of Organic Agriculture
• /
• v.20 no.3
• /
• pp.313-326
• /
• 2012

The aim of this study was to determine the effect of effective microorganisms (EM) on growth, yield and fruit nutrient contents of two cultivars ('Muhanjilju' and 'Daetong') of hot pepper. The number of injection of EM cultivated are 6 times from the pepper plant seedlings until harvested in both cultivars. Stem girth was highest in the treatment of Lactobacillus plantarum whereas lowest in no EM control. In 'Muhanjilju', the number of branches was highest (79.3) in the treatment of Bacillus subtilis whereas in 'Daetong' was highest (119.0) as treated with Lactobacillus plantarum. Yield of the red hot pepper fruits that sum of two varieties was highest in the treatment of Rhodopseudomonas capsulatas (53.1kg FW per 10a). Regardless of EM treatments, average yield was 8% higher in 'Daetong' than is 'Muhanjilju' (33.8kg vs 31.2kg per 10a). The incidence of antracnose was lowest by the Rhodopseudomonas capsulatas treatment, which led to the highest yield. As for the effect on fruit mineral nutrients, total N and phosphorus concentrations were highest in the treatment of Lactobacillus plantarum and Bacillus subtilis in both varieties, respectively. The highest content of total carotenoids was obtained from the treatment of Lactobacillus plantarum in both varieties.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.47-53
• /
• 2012

Bonding strength of Sn-3.0Ag-0.5Cu solder joint due to degradation characteristic of OSP surface finish was investigated, compared with SnPb finish. The thickness variation and degradation mechanism of organic solderability preservative(OSP) coating were also analyzed with the number of reflow process. To analyze the degradation degree of solder joint strength, FR-4 PCB coated with OSP and SnPb were experienced preheat treatment as a function of reflow number from 1st to 6th pass, respectively. After 2012 chip resistors were soldered with Sn-3.0Ag-0.5Cu on the pre-heated PCB, the shear strength of solder joints was measured. The thickness of OSP increased with increase of the number of reflow pass by thermal degradation during the reflow process. It was also observed that the preservation effect of OSP decreased due to OSP degradation which led Cu pad oxidation. The mean shear strength of solder joints formed on the Cu pads finished with OSP and SnPb were 58.1 N and 62.2 N, respectively, through the pre-heating of 6 times. Although OSP was degraded with reflow process, the feasibility of its application was proven.

• KSBB Journal
• /
• v.15 no.6
• /
• pp.664-669
• /
• 2000

Micellar aggregates are known to be useful for the selective isolation of biologically active materials such as amino acids, proteins, and enzymes from crude mixtures sparsely dispersed in water. In this study, the effects of pH, salt type and its concentration on the solubilization of $\alpha$-chymotrypsin into the organic micellar phase, which consisted of AOT (sodium 야(2-ethylhexy)sulfosuccinate) and iso-octane, were comprehensively examined. It was found that maximum extraction efficiency was attained at a pH below the isoelectric point of $\alpha$-chymotrypsin; at pH=5.0 for NaCl and KCl, and at pH=7.0 for $CaCl_2$and $MgCl_2$. In order to avoid complications stemming from the precipitationof protein at low pH interfaces, the protein concentrations in the organic and aqueous phases were directly measured. The size of the micelle water pool was estimated by measuring the molar ratio of the surfactant to the water, W(sub)o. The resulting values of W(sub)o were nearly constant at 30 and 19 for NaCl and KCl, respectively, and were independent of pH. The addition of 1:2 salts like $MgCl_2$and $CaCl_2$ led to much lower, but a constant value of, W(sub)o than the 1:1 salts.