• 한국토양비료학회지
• /
• 제46권6호
• /
• pp.487-493
• /
• 2013

The effects of long-term fertilization on soil biological properties and microbial community structure in the plough layer in a rice paddy soil in southern Korea were investigated in relation to the continuous application of chemical fertilizers (NPK), straw based compost (Compost), combination these two (NPK + Compost) for last 40 years. No fertilization plot (Control) was installed for comparison. Though fertilization significantly improved rice productivity over control, the long-term fertilization of NPK and compost combination was more effective on increasing rice productivity and soil nutrient status than single application of compost or chemical fertilizer. All fertilization treatments had shown significant improvement in soil microbial properties, however, continuous compost fertilization markedly increased soil enzyme and microbial activities as compared to sole chemical fertilization. Results of microbial community structure, evaluated by EL-FAME (ester-linked fatty acid methyl esters) method, revealed big difference among Control, NPK, and Compost. However, both Compost and Compost+NPK treatments belonged to the same cluster after statistical analysis. The combined application of chemical fertilizer and organic amendments could be more rational strategy to improve soil nutrient status and promote soil microbial communities than the single chemical fertilizer or compost application.

• 한국인쇄학회지
• /
• 제28권1호
• /
• pp.51-63
• /
• 2010

Ink-jet is part of the non impact printing that shooting the ink drop from the nozzle to paper. It is very silence and express good color. There are two types of printing that continuous and drop on demand. But drop on demand process is becoming the mainstream. these days, LCD, PDP is passed more than semiconductor industry. And we expect organic EL, FED as a next display. But product equipment, main component and technology have a gap between an advanced country and us nevertheless physical development. Expecially, previous process part is depended on imports. Ink-jet printing technology that there isn't complicated photo lithography process is attracted, so ink-jet printing resolution is more embossed. But there were not many of ink-jet resolution thesis but ink-jet head or nozzle. Because, to out of the ink from the nozzle is unseeable and hard to experiment. Therefore this thesis was experimented and simulated how can ink-jet printer improved resolution by flow-3d simulation package program.

• 한국응용과학기술학회지
• /
• 제19권3호
• /
• pp.189-197
• /
• 2002

The color stability and purity from OLED is of current interest. Aggregation of dyes alters the device color after fabrication of the devices. Exciplex and electroplex formations have been proposed to explain the aggregate color change. We investigate the possibility of exciplex formation and propose the new electroplex state that can cause the bathochromic shift of the electroluminescence spectrum from the devices with TPD/PBD layers. The photoluminescence maximum of the device was 420nm, and the electroluminescence maximum of the device to became 480nm. The bathochromic shift cannot be attained with photoluminescence study with highly concentrated TPD/PBD mixture. This clearly indicates that the 480nm spectrum of the devices is not resulted from the exciplex formation with TPD and PBD. We observed the overshoot in EL spectrum from the OLEDs. The most intense overshoot was observed at 460nm, which may be due to the aggregates that are formed after the electric field has been removed from the devices.

• Environmental Engineering Research
• /
• 제20권4호
• /
• pp.363-369
• /
• 2015

This study aims to characterize solid household waste and to present physicochemical characteristics of fresh leachate before landfilling in Kasba Tadla city, Morocco. Obtained results show that household waste produced in 2013 were about 11,787 tons, or 0.27 tons/capita/year. These wastes were composed essentially of organic materials (74%), paper (8%), plastics (9%), metals (1%), and glass (0.5%). However, monthly produced leachate ranges from a maximum of $130.92m^3$ during summer and a minimum of $21.88m^3$ in winter. Moreover, leachate treatment using Upflow Anaerobic Sludge Blanket technique was accompanied by a decrease in electrical conductivity, certainly related to leachate-sediment chemical exchanges. Otherwise, the same acidity reduction phenomenon occurs when pH value increased from 4.49 to 6.17 after 24 hours, confirming the system response since the early stages of treatment. In addition, temporal evolution of the treatment efficiency in terms of COD highlighted a very important reduction which reached 94% after 5 days with an average temperature of $25^{\circ}C$.

• 한국응용과학기술학회지
• /
• 제17권3호
• /
• pp.174-177
• /
• 2000

The effect of a-sexithiophene(${\alpha}-6T$) layers on the light emitting diode (LED) were studied. The ${\alpha}-6T$ was used for a buffer layer in electroluminescent (EL) devices. Enhanced carrier (hole) injection and improved emission efficiency were observed. Carrier injection characteristics were investigated as a function of ${\alpha}-6T$ later thickness. The efficiency of the electroluminescence was proportional to the thickness of ${\alpha}-6T$ layer. The highest efficiency was observed 600A of ${\alpha}-6T$ later, which was about 1.5 times higher than that of device without ${\alpha}-6T$ later. The device with a-6T showed an operation voltage lowered by 2V. The ${\alpha}-6T$ layer can substitute hole blocking layer, and control charge injection properties.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.939-942
• /
• 2001

We fabricated Red Organic light-emitting devices(OLED). The Basic Device Structure is ITO/hole transfer layer, TPD(50nm)/red emitting layer, Alq3 doped with DCM2 or DCM2:rubrene(xnm)/electorn transfer layer, Alq3(50-xnm)/LiF(0.8nm)/Al(8nm) . The thickness of emitting layer(xnm) changed 5, 10, 20nm. we demonstrate red emitting OLED with dependent on the thickness and concentrators of Alq3 layer doped with DCM2 or co-doped with DCM2:ruberene. The Emission color and Brightness are changed with doping or co-doping condition, dopant concentarton. In the case of rubrene:DCM2 co-doped layer structure, the red color Purity and device efficiency is improved. The CIE index of rubrene co-doped OLED is x=0.67, y=0.31. By co-doping the Alq3 layer with DCM2, rubrene, EL efficiency improved from 0.38cd/A to 0.44cd/A in comparison whit DCM2 doped Alq3 layer.

• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.135-138
• /
• 2008

Two bicarbazyl-containing fluorene copolymers, PFEBCz (95/5) and PFEBCz (75/25), were synthesized for white light electroluminescence from a single emitting polymer. All synthesized polymers were soluble in common organic solvents such as chloroform and toluene. The weight-average molecular weights (Mw) of the PFEBCz (95/5) and PFEBCz (75/25) copolymers were found to be 11,000 and 5,700 with polydispersity indices 1.4 and 1.8. The EL spectrum of the PFEBCz (75/25) device showed bright white-light emission with CIE coordinates of (0.32, 0.34) at 1000 cd/m2, which is very close to that for pure white (0.33, 0.33). This white emission may have been due to strong excimer formation between the bicarbazyl and fluorene polymer backbone. The device exhibited a maximum brightness of 3400 cd/m2 with a maximum efficiency of 0.2 cd/A.

• 한국전기전자재료학회논문지
• /
• 제18권12호
• /
• pp.1139-1142
• /
• 2005

Recently, organic light emitting diodes(OLEDs) is widely used as one of the information display techniques. We synthesized 2-(2-hydroxyphenyl)benzoxazole($Zn(HPB)_2$). We studied the luminescent properties of OLEDs using $Zn(HPB)_2$. The ionization potential(IP) and the electron affinity(EA) of $Zn(HPB)_2$ investigated using cyclic-voltammetry(C-V). The IP and EA were 6.5 eV and 3.0 eV, respectively. The PL and EL spectra of $Zn(HPB)_2$ were observed at the wavelength of 450 nm. We used $Zn(HPB)_2$ as an emitting layer and hole blocking layer. At the experiment about hole blocking effect, we inserted $Zn(HPB)_2$ between emiting material layer(EML) and cathode, and between hole transport layer(HTL) and emitting material layer(EML). We measured current density-voltage and luminance-voltage characteristics at room temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.180-180
• /
• 2010

본 연구에서는 P-Type의 NiO를 Glass기판의 ITO전극위에 RF-스퍼터링 방법으로 증착하였으며, NiO 완충층의 두께 변화에 따른 OLED (Organic Light Emitting Diode) 소자의 발광 특성에 대해 연구하였다[1, 2]. NiO는 우수한 전기 광학적 특성을 가지고 있어 OLED소자의 구동전압, 발광 효율 등의 특성을 향상 시킬 수 있다[3]. NiO 완충층의 두께 변화는 스퍼터링 증착시간을 통해 5-20 nm로 조절하였으며 소자의 구조는 Glass/ITO/NiO(0~20nm)/NPB(40nm)/Alq3(60nm)/LiF(0.5nm)/Al(120nm)형태로 제작하였다. ITO/NPB 계면에 NiO 완충층을 삽입함으로써 OLED 발광소자의 구동전압을 ~8V에서 ~5V (NiO, 10nm)로 낮출 수 있었다.

• 반도체디스플레이기술학회지
• /
• 제11권1호
• /
• pp.73-78
• /
• 2012

In this study, the optimal process condition was induced about the pillar arrangement process of applying the screen printing method in the manufacture process of vacuum glazing panel. The high precision screen printing is technology which pushes out the paste and spreads it by using the squeegee on the stainless steel plate in which the pattern is formed. The screen printing method is much used in the flat panel display field including the LCD, PDP, FED, organic EL, and etc for forming the high precision micro-pattern. Also a number of studies of screen printing method have been conducted as the method for the cost down through the improvement of productivity. The screen printing method has many parameters. So we used Taguchi method in order to decrease test frequencies and optimize this parameters efficiently. In this study, experiments of pillar arrangement were performed by using Taguchi experimental design. We analyzed experimental results and obtained optimal conditions which are 4 m/s of squeegee speed, $40^{\circ}$ of squeegee angle and distance between metal mask and glass.