Journal of the Korean Graphic Arts Communication Society (한국인쇄학회지)

The Korean Graphic Arts Communication Society (한국인쇄학회)
권호 표지

A Study on the Simulation of the Resolution for Ink-Jet Printing

잉크젯 프린팅에서 해상력에 관한 컴퓨터 시뮬레이션 연구

  • Lee, Ji-Eun (Dept. of Graphic Arts Engineering, Graduate School, Pukyong National University) ;
  • Youn, Jong-Tae (Dept. of Graphic Arts Information, College of Engineering, Pukyong National University) ;
  • Koo, Chul-Whoi (Dept. of Graphic Arts Information, College of Engineering, Pukyong National University)
  • 이지은 (부경대학교 대학원 인쇄공학과) ;
  • 윤종태 (부경대학교 공과대학 인쇄정보공학과) ;
  • 구철회 (부경대학교 공과대학 인쇄정보공학과)
  • Received : 2010.01.08
  • Accepted : 2010.02.05
  • Published : 2010.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

Ink-jet is part of the non impact printing that shooting the ink drop from the nozzle to paper. It is very silence and express good color. There are two types of printing that continuous and drop on demand. But drop on demand process is becoming the mainstream. these days, LCD, PDP is passed more than semiconductor industry. And we expect organic EL, FED as a next display. But product equipment, main component and technology have a gap between an advanced country and us nevertheless physical development. Expecially, previous process part is depended on imports. Ink-jet printing technology that there isn't complicated photo lithography process is attracted, so ink-jet printing resolution is more embossed. But there were not many of ink-jet resolution thesis but ink-jet head or nozzle. Because, to out of the ink from the nozzle is unseeable and hard to experiment. Therefore this thesis was experimented and simulated how can ink-jet printer improved resolution by flow-3d simulation package program.

Keywords

References

  1. P. H. Shin, J. O. Sung and S. J. Lee, On the Characteristics of the Droplet Form ation from an Inkjet Nozzle Driven by a Piezoelectric Actuator, The Korean Society of Visualization, 6, pp. 47-52 (2008). https://doi.org/10.5407/JKSV.2008.6.1.047
  2. M. K. Kim, J. Y. Hwang, S. H. Lee, K. T. Kang and H. S. Kang, Phase Matching of Pressure Wave in a Drop on demand Inkjet Print Head, Journal of the Korean Society of Precision Engineering, 25(9), pp. 116-125 (2008).
  3. W. C. Sim, S. J. Park, Y. J. Kim, C. S. Park, Y. S. Yoo, J. W. Joung and Y. S. Oh, Performance Analysis of the Industrial Inkjet Printing Head Using 1D Lumped Model, Journal of the Korean Society of Precision Engineering, 24(11), pp. 101-107 (2007).
  4. W. H. Lee, J. S. Kim, D. S. Kim and M. C. Lee, Three Dimensional Printing Process Using Ink Jet Technology, Journal of the Korean Society of Precision Engineering, 28(8), pp. 33-38 (2006).
  5. K. S. Kwon and J. H. Myong, Experimental Study on the Relationship between Ink Droplet Volume and Inkjet Waveform, Journal of the Korean Society of Precision Engineering, 26(4), pp. 141-145 (2009).
  6. J. H. Byun, D. S. Sea, Y. M. Choi, H. J. Chang, K. J. Kong, J. O. Lee and B. H. Ryu, Fabrication of Silver Micro Lines by Ink-Jet Method, The Korean Journal of Ceramics, 41(10), pp. 788-791 (2004). https://doi.org/10.4191/KCERS.2004.41.10.788
  7. C. R. Yoon, H. J. Oh, N. H. Lee, Guo Yupeng, W. J. Lee, K. S. Park and S. J. Kim, Preparation of Ultra-Thin Transparent $TiO_{2}$ Coated Film by Ink-Jet Printing Method, The Korean Institute of Surface Engineering, 40(4), pp. 190-196 (2007). https://doi.org/10.5695/JKISE.2007.40.4.190
  8. S. S. Kim, D. S. Kim, W. H. Lee, D. Y. Shin and C. H. Kim, Ink-jet Printing Technology for Paradigm Shift in Mass Production, Journal of the Korean Society of Precision Engineering, 23(8), pp. 15-21 (2006).
  9. D. Y. Shin, W. H. Lee, T. G. Kang and D. S. Kim, Challenging issues of Piezo Drop-On-Demand Ink-Jet Printing Technology, Journal of the Korean Society of Precision Engineering, 23(8), pp. 7-14 (2006).
  10. Vance Bergeron, Daniel Bonn, Jean Yves Martin & Louis Vovelle, "Controlling droplet deposition with polymer additives", NATURE, 405, pp. 773 (2000).
  11. 김윤정, "Flow-3D를 활용한 유체유동 해석", CAD&Graphics, pp. 166-171 (2007).