• Macromolecular Research
• /
• 제14권3호
• /
• pp.343-347
• /
• 2006

A novel, blue light-emitting polymer, poly(phenyl-9,9-dioctyl-9',9'dihexanenitrile)fluorene (PPFC6N), containing an alkyl and cyano group in the side chain, was synthesized by Suzuki polymerization and characterized. The polymer structure was confirmed by $^1H-NMR$. The number average molecular weight and the weight average molecular weight of the obtained polymer were 9,725 and 9,943 respectively. The resulting polymer was thermally stable with a glass transition temperature ($T_g$) of $93^{\circ}C$, and was easily soluble in common organic solvents such as THF, toluene, chlorobenzene and chloroform. The HOMO and LUMO energy levels of the polymer were revealed as 5.8 and 2.88 eV by cyclic voltammetry study, respectively. The ITO/PEDOT:PSS (40 nm)/PPFC6N (80 m)/LiF (1 nm)/Al (150 nm) device fabricated from the polymer emitted a PL spectrum at 450 nm and showed a real blue emission for pure PPFC6N in the EL spectrum. When t-butyl PBD was introduced as a hole blocking layer, the device performance was largely improved and the EL spectrum was slightly shifted toward deep blue. The device with PPFC6N containing t-butyl PBD layer showed the maximum luminance of 3,200 $cd/m^2$ at 9.5 V with a turnon voltage of 7 V.

• Korean Chemical Engineering Research
• /
• 제51권5호
• /
• pp.634-639
• /
• 2013

유기발광다이오드(Organic Light-Emitting Diodes, OLEDs)의 효율을 향상시키기 위하여 다양한 아세트산금속(Macetate, M: Li, Na, K, Cs)을 cathode underlayer 소재로 사용하고 이들이 소자의 전자주입 및 발광 특성에 미치는 영향에 대하여 연구하였다. 1 nm 두께의 M-acetate 층을 cathode underlayer로 사용한 경우 Cs-acetate를 사용한 소자를 제외한 모든 소자에서 기존의 LiF 전자주입층을 사용한 소자보다 효율적인 전자주입 및 향상된 발광특성을 보였으며, M-acetate에 포함된 금속의 일함수가 작을수록 높은 전류밀도와 우수한 발광특성을 보였다. 또한, cathode underlayer의 두께가 소자의 특성에 미치는 영향을 분석한 결과, 사용된 M-acetate의 분자크기에 따라 각기 다른 두께(Li-acetate 0.7 nm, Cs-acetate 2.0 nm)에서 최적의 발광특성을 보였으며 기존의 LiF 층을 사용한 소자에 비하여 동일 인가전압에서 전류효율이 약 60% 향상된 결과를 얻을 수 있었다.

• Current Applied Physics
• /
• 제18권12호
• /
• pp.1496-1506
• /
• 2018

Organic/inorganic ultraviolet photodetector was fabricated using thermal evaporation technique. Organic/inorganic heterojunction based on thermally evaporated copper (II) acetylacetonate thin film of thickness 200 nm deposited on an n-type silicon substrate is introduced. I-V characteristics of the fabricated heterojunction were investigated under UV illumination of intensity $65mW/cm^2$. The diode parameters such as ideality factor, n, barrier height, ${\Phi}_B$, and reverse saturation current, $I_s$, were determined using thermionic emission theory. The series resistance of the fabricated diode was determined using modified Nord's method. The estimated values of series resistance and barrier height of the diode were about $0.33K{\Omega}$ and 0.72 eV, respectively. The fabricated photodetector exhibited a responsivity and specific detectivity about 9 mA/W and $4.6{\times}10^9$ Jones, respectively. The response behavior of the fabricated photodetector was analyzed through ON-OFF switching behavior. The estimated values of rise and fall time of the present architecture under UV illumination were about 199 ms and 154 ms, respectively. Finally, enhancing the photoresponsivity of the fabricated photodetector, post-deposition plasma treatment process was employed. A remarkable modification of the device performance was noticed as a result of plasma treatment. These modifications are representative in a decrease of series resistance and an increase of photoresponsivity and specific detectivity. The process of plasma treatment achieved an increment of external quantum efficiency from 5.53% to 8.34% at -3.5 V under UV illumination.

• 대한화학회지
• /
• 제64권1호
• /
• pp.7-18
• /
• 2020

An efficient and facile procedure has been developed for the synthesis of novel bichalcone derivatives (4a, 4b). The key step contains the solvent-free aldol synthesis of bichalcones based on quinones. Bichalcones (4a, 4b) were used as precursors for the synthesis of some interesting heterocyclic compounds like, diazepines (5a, 5b), pyrazolo-pyrimidines (7a, 7b), and pyrazoline derivatives (8a, 8b). Moreover, new thioxopyrimidine derivatives (9a, 9b) were furnished and used as a functionalizing agent to produce the triazole-pyrimidines (11, 12) and the carbonitrile derivative (14). All the synthesized compounds were fully characterized using physical and spectral data like, FT-IR, ¹H NMR, ¹³C NMR, and MS. Bichalcones (4a, 4b) and diazepines (5a, 5b) were screened for their anticonvulsant activity, where compounds (4a, 5a, and 5b) revealed potent anticonvulsant activity compared to diazepam. On the other hand, some of the prepared compounds were screened for their antiproliferative activity and they showed significant cytotoxic effects on most of the cancer cell lines with regard to broad spectrum antitumor activity.

• 한국전기전자재료학회논문지
• /
• 제20권8호
• /
• pp.711-715
• /
• 2007

Properties of organic light-emitting diodes (OLEDs) with aluminum-doped zinc oxide (ZnO:Al) anodes showed different behaviors from OLEDs with indium tin oxide (ITO) anodes according to driving conditions. OLEDs with ITO anodes gave higher current density and luminance in lower voltage region and better EL and power efficiency under lower current density conditions, However, OLEDs with ZnO:Al anodes gave higher current density and luminance in higher voltage region over about 8V and better EL and power efficiency under higher current density over $200mA/cm^2$. These seemed to be due to the differences in conduction properties of semiconducting ZnO:Al and metallic ITO. OLEDs with ZnO:Al anodes showed nearly saturated efficiency under high current driving conditions compared with those of OLEDs with ITO anodes. This meant better charge balance in OLEDs with ZnO:Al anodes. These properties of OLEDs with ZnO:Al anodes are useful in making bright display devices with efficiency.

• 반도체디스플레이기술학회지
• /
• 제5권3호
• /
• pp.23-27
• /
• 2006

Recently, Top emission organic light-emitting diode (TEOLED) has been attracted by their potential application for the development of flat panel display (FPD). We have fabricated the high luminance top emission organic-emitting diode (TEOLED) using dual cathode layer and three top emitting structure. These devices were characterized by electroluminescence (EL) and current density-voltage (J-V) measurements. After compared it with Au anode structure, luminance of the device using dual anode was better than using without Al device. Consequently, Al layers are very good candidates for a promising electron-injecting buffer layer for top emission light-emitting diode (TEOLED).

• 대한전자공학회논문지SD
• /
• 제37권6호
• /
• pp.17-23
• /
• 2000

본 연구에서는 Sq색소를 이용하여 적색발광의 디바이스를 제작하고, 발광효율을 증가시키기 위해 OXD7과 $Alq_3$층을 발광층과 음극사이에 삽입하여 그 효과를 관측하고, 기구특성을 검토하였다. 정공운송층으로서 TPD, 발광층 호스트재료로서 $Alq_3$, 게스트 재료로서 Sq를 사용하였다. 그 결과 $Alq_3$층의 삽입은 효율을 증가시킬 수 있었지만, 삽입된 $Alq_3$층에서의 발광 때문에 색순도 높은 적색발광을 얻지 못했다. OXD7층의 삽입은 정공을 블로킹하고 정공을 누적시킨다. 이는 전자와 정공의 재결합확률을 증가시키기 때문에 색순도 높은 적색발광을 유지하면서 휘도 특성과 발광효율이 향상되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.579-581
• /
• 2004

A new DCM derivative containing the phenoxazine moiety (DCPXZ) has been synthesized for use as a red fluorescent dye molecule in organic light-emitting diodes (OLEDs). The photoluminescence and electroluminescence properties of DCPXZ were examined. The maximum photoluminescence of DCPXZ in chloroform solution ($10^{-5}$ mol) was observed at 616 nm. EL devices were fabricated with the structure ITO/PEDOT-PSS/Cu-PC(15nm)/${\alpha}$-NPD(45nm)/$Alq_3$:DCPXZ(30nm)/$Alq_3$(30nm)/LiF(0.5nm)/Al. The maximum EL emission for the 2.0% DCPXZ-doped device was at 608 nm with CIE coordinates (0.57, 0.42). The EL device exhibited a maximum brightness of 15,000 cd/$m^2$ at 19.4 V and a power efficiency of 1.04 lm/W at a luminance of 100 cd/$m^2$.

• 한국미생물·생명공학회지
• /
• 제24권3호
• /
• pp.352-356
• /
• 1996

Alcoholic distillery wastes are utilized as dual purposes to produce PHB in lower production cost and to reduce the amount of waste to be treated. In this study, various attempts were made to increase PHB production under various conditions by Actinobacillus sp. EL-9 in a shaker culture. The addition of glucose, NH$_{4}$NO$_{3}$ to alcoholic distillery wastes slightly promoted cell mass and PHB production. Enzyme hydrolysis of alcoholic distillery wastes increased the production of PHB than that of untreated waste and acid hydrolysis treatment. The PHB weight in alcoholic distillery wastes was 1.91 g/l. Fermentation process of PHB production reduced the amount of COD value up to 54%, which reduced organic loading rate and capacity of activated sludge system.

• Bulletin of the Korean Chemical Society
• /
• 제23권9호
• /
• pp.1235-1267
• /
• 2002

A series of 2,5-dialkoxy substituted poly(1,4-phenylenevinylene) derivatives containing a rigid and bulky cyclohexyl group in the side chain, poly[2-(7-cyclohexylheptyloxy)-5-butoxy-1,4-phenylenevinylene] (PBCyHpPV), Poly[2-(6-cyclohexylmethoxyhexyloxy)-5-butoxy-1,4-phenylenevinylene] (PBCyHxPV), Poly[2,5-di-(6-cyclohexylmethoxy-hexyloxy)-1,4-phenylenevinylene] (PDCyHxPV) were synthesized via the Gilch polymerization. The synthesized polymers were soluble in common organic solvents and showed good thermal stability up to $370^{\circ}C$. The maximum absorption of PBCyHpPV, PBCyHxPV and PDCyHxPV as thin films was at 513 ㎚, 515 ㎚, 511 ㎚, respectively. Photoluminescence maximum emission of above polymers appeared at 590 ㎚, 597 ㎚, 590 ㎚, respectively. The electroluminescence (EL) maxima of the polymers appeared around 585-590 ㎚, and also showed another shoulder around 630 ㎚ strongly. PDCyHxPV showed the highest EL efficiency and EL power than those of other polymers due to the dilution effect of the two rigid and bulky cyclohexyl groups.