• Bulletin of the Korean Chemical Society
• /
• v.26 no.1
• /
• pp.146-150
• /
• 2005

Two new barium vanadium borophosphate compounds, $(NH_4)_2(C_2H_{10}N_2)_6[Ba(H_2O)_5]_2[V_2P_2BO_{12}]_6{\cdot}8H_2O$, Ba- VBPO1 and $(NH_4)_8(C_3H_{12}N_2)_4[Ba(H_2O)_7][V_2P_2BO_{12}]_6{\cdot}17H_2O$, Ba-VBPO2 have been synthesized by interdiffusion methods in the presence of diprotonated ethylenediamine and 1,3-diaminopropane. Compound Ba-VBPO1 has an infinite chain anion (${[BaH_2O)_5]_2[V_2P_2BO_{12}]_6}$$^{14-}$, whereas Ba-VBPO2 has a discrete cluster anion {[$Ba(H_2O)_7][V_2P_2BO_{12}]_6$}$^{16-}$. Crystal Data: $(NH_4)_2(C_2H_{10}N_2)_6[Ba(H_2O)_5]_2[V_2P_2BO_{12}]_6{\cdot}8H_2O$, triclinic, space group P$\overline{1}$ (no. 2), a = 13.7252(7) $\AA$, b = 15.7548(8) $\AA$, c = 15.8609(8) $\AA$, α = 63.278(1)$^{\circ}$, $\beta$ = 75.707(1)$^{\circ}$, $\gamma$ = 65.881(1)$^{\circ}$, Z = 1; $(NH_4)_8(C_3H_{12}N_2)_4[Ba(H_2O)_7][V_2P_2BO_{12}]_6{\cdot}17H_2O$, monoclinic, space group C2/c (no. 15), a = 31.347(2) $\AA$, b = 17.1221(9) $\AA$, c = 22.3058(1) $\AA$, $\beta$ = 99.303(1)$^{\circ}$, Z = 4.

• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.314-320
• /
• 2004

Soluble aromatic polyimides bearing 4-(4-oxyalkyleneoxystyryl)- pyridines (ethylene and hexylene) as photoreactive side groups were synthesized and characterized. The photoreactive polymers were soluble in various polar organic solvents and their films were easily formed by solution casting. The photoreactivities of the polymers in the film state were approximately 64% at an exposure energy of 1.5 J/$\textrm{cm}^2$. Transmittances of the polymer films were about 85% after annealing at 20$0^{\circ}C$. Therefore, these polymers can be evaluated to be photoreactive polyimides with good transparency and solubility. The dichroic ratios of the polymers with ethylene and hexylene groups as the alkylene spacers were 0.023 and 0.026, respectively. The order parameters of 4'-pentyl-4-bipheny1carbonitrile as a liquid crystal (LC) in the film cells of the former and latter polymers were 0.50 and 0.52, respectively. These results indicate that the polymers show the effect of alkylene spacer on the photoalignments. The LC in the film cells of the polymers was perpendicularly oriented to the electric vector of the linear polarized UV light (LPUVL).

• Polymer(Korea)
• /
• v.35 no.4
• /
• pp.350-355
• /
• 2011

A soluble polyamide containing photosensitive l,4-phenylenediacrylic acid (PDA) in main chain with biphenyl moiety was synthesized. The chemical structure of synthesized polyamide was investigated by means of $^1H$ NMR spectroscopy. The polymer was stable up to $280^{\circ}C$ and soluble in organic solvents, giving a good quality of thin films. The photoreaction of unpolarized LTV irradiated films was investigated by means of UV-vis absorption spectroscopy and FTlR spectroscopy, and liquid crystals (LCs) alignment property was examined by exposing to linearly polarized UV light (LPUVL) of 260~380 nm. The polyamide in film has excellent photoreactivity to unpolarized UV light. Direction selective photoreaction of PDA moiety in Lhe film was found to further induce nematic liquid -crystals to align along a perpendicular direction with respect to the electric vector of LPUVL, regardless of exposure energy of LPUVL. In addition, pretilt angle was measured by means of crystal rotation method. LPUVL-exposed polymer film induced the alignment of liquid-crystals (LC) with a pretilt angle of 0.2~$0.5^{\circ}$.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.678-683
• /
• 2012

Ceria is one of the most important catalytic materials which can be used in three-way catalysts, waste water treatment, petroleum refining, etc. So far, many methods have been studied to produce ceria nanoparticles. In this study, ceria nanoparticles were prepared via solvothermal synthesis using supercritical methanol in short reaction time using a batch reactor. The size of synthesized ceria nanoparticles in supercritical methanol is 6 nm without capping agent, which is smaller than that made in supercritical water at the same conditions of $400^{\circ}C$ and 30 MPa. Size difference results from density and critical point difference between water and methanol and slow reaction rate at the surface of ceria particles in supercritical methanol which reduces crystal growth rate. Several organic compounds were added to modify the surface of ceria nanoparticles, and in-situ surface modification was confirmed by FT-IR and TGA analysis. Surface modified ceria nanoparticles have excellent dispersibility in organic solvent. Size and shape of surface modified ceria particles can be controlled by adjusting molar ratio of modifier to precursor and selection of modifier.

• Journal of Mechanical Science and Technology
• /
• v.18 no.9
• /
• pp.1680-1688
• /
• 2004

The information indicating device plays an important part in the information times. Recently, the classical CRT (Cathod Ray Tube) display is getting transferred to the LCD (Liquid Crystal Display) one which is a kind of the FPDs (Flat Panel Displays). The OLED (Organic Light Emitting Diodes) display of the FPDs has many advantages for the low power consumption, the luminescence in itself, the light weight, the thin thickness, the wide view angle, the fast response and so on as compared with the LCD one. The OLED has lately attracted considerable attention as the next generation device for the information indicators. And also it has already been applied for the outside panel of a mobile phone, and its demand will be gradually increased in the various fields. It is manufactured by the vapor deposition method in the vacuum state, and the uniformity of thin film on the substrate depends on the temperature distribution in the point-cell source. This paper describes the basic concepts that are obtained to design the point-cell source using the computational temperature analysis. The grids are generated using the module of AUTOHEXA in the ICEM CFD program and the temperature distributions are numerically obtained using the STAR-CD program. The temperature profiles are calculated for four cases, i.e., the charge rate for the source in the crucible, the ratio of diameter to height of the crucible, the ratio of interval to height of the heating bands, and the geometry modification for the basic crucible. As a result, the blowout phenomenon can be shown when the charge rate for the source increases. The temperature variation in the radial direction is decreased as the ratio of diameter to height is decreased and it is suggested that the thin film thickness can be uniformed. In case of using one heating band, the blowout can be shown as the higher temperature distribution in the center part of the source, and the clogging can appear in the top end of the crucible in the lower temperature. The phenomena of both the blowout and the clogging in the modified crucible with the nozzle-diffuser can be prevented because the temperature in the upper part of the crucible is higher than that of other parts and the temperature variation in the radial direction becomes small.

• Current Photovoltaic Research
• /
• v.4 no.2
• /
• pp.68-79
• /
• 2016

The power conversion efficiency of perovskite solar cells has remarkably increased from 3.81% to 22.1% in the past 6 years. Perovskite solar cells, which are based on the perovskite crystal structure, are fabricated using organic-inorganic hybrid materials. The advantages of these solar cells are their low cost and simple fabrication procedure. Also, they have a band gap of about 1.6 eV and effectively absorb light in the visible region. For the commercialization of perovskite solar cells in the field of photovoltaics, the issue of their long term stability cannot be overlooked. Although the development of perovskite solar cells is unprecedented, their main drawback is the degradation of the perovskite structure by moisture. This degradation is accelerated by exposure to UV light, temperature, and external bias. This paper reviews the aforesaid reasons for perovskite solar cell degradation. We also discuss the research directions that can lead to the development of perovskite solar cells with high stability.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.6
• /
• pp.729-733
• /
• 2006

Small yellowish brown crystals were found in some concentrated oyster extracts which prepared by heating with the drip and washed water of boiled oyster in oyster processing factories. We collected those crystals by filtering the oyster extracts and analysed X ray diffraction (XRD), scanning electron microscopy (SEM) and minerals by ICP. Those were composed of moisture (8.1%), organic materials (21.6%) and inorganic materials (70.2%). Those major inorganic materials were determined as Ca (53.8%) and P (43.8%), from the ICP and elucidated those crystal as brushite $(CaHPO_4{\cdot}2H_2O)$ by XRD and SEM. Organic materials contained crude protein (33.7%) consisting of 7 amino acids. It is presumed that brushite may be formed by the reaction of excess Ca with P in the oyster extracts during concentrating process under higher temperature.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.159-162
• /
• 2005

전자빔을 이용하던 CRT(Cathode Ray Tube) 모니터에서 픽셀단위의 LCD(Liquid Crystal Display) 디스플레이 사용으로 휴대용 정보처리 장치들은 급속한 발전을 이루게 되었다. 기존의 CRT 모니터에서 전자빔을 사용하던 방식에서 픽셀(Pixel) 단위의 후면발광 디스플레이를 만들면서 CRT 모니터보다 빠른 응답특성을 나타내며 저 전력일 뿐만 아니라 디스플레이의 두께도 줄일 수 있게 되었다. 휴대가 가능한 디스플레이의 발전으로 노트북이나 PDA와 같은 실시간 정보를 활용 및 처리 할 수 있는 방법들을 제시할 수 있었지만 원활한 활용을 위해 더 적은 전력을 사용하는 방법들이 제시되어야 했다. 이에 따라 저 전력 소모, 빠른 응답특성, 넓은 시야각 그리고 경량화가 가능한 디스플레이가 되기 위한 새로운 디스플레이가 선을 보이게 되었다. 현재 차세대 디스플레이로 각광을 받고 있는 디스플레이 소자로는 OLED(Organic Light Emitting Diode)가 있다 이는 LCD 디스플레이가 가지고 있는 단점을 보완하여 우선적으로 높은 색도가 가능하며 후면발광을 사용하지 않고 자체 발광을 하기 때문에 저 전력 소모가 현실화되었다. 또한 디스플레이의 유동성이 가능하여 휘어질 수 있는 특성을 가지고 있다. 그러나 이러한 유기발광 소자의 경우 높은 발광 효율을 위한 구조적 개선이 필요하며 소자의 수명도 개선해야 한다. 이에 따라 유기발광 소자의 메카니즘에 대한 파악이 필요하게 되며 물리적 구조에 대한 이해가 필요하다. 이를 위해 물리적, 수치적 해석으로 소자의 특성을 파악해 줌으로써 개선된 유기발광 소자 제작이 가능 할 것이다.기에 대한 영향정도를 측정하여 정량적으로 도출하였다. 이를 각 구간에 대해 상호 비교 분석함으로써 대형국책사업에서의 공기지연인자에 대한 분석 방법론을 정립하였고 공기지연 분석 방법론의 현실적 적용을 위한 제언과 그에 따른 개선사항에 대해 도출하였다.있는 발판을 마련하게 된다고 추정하였다. 0.5%가 control사이에서 0.95로 가장 색차가 크게 나타났으며, 그 다음이 냉동분쇄 0.5% 0.83으로 나타나 송이의 첨가율이 높을수록 색차가 크게 나타나는 것을 알 수 있다. 색차가 가장 낮은 제품은 법동분쇄 0.3%, 동결건조 0.3%로 나타났다. 송이양갱의 색(color), 냄새(flavor), 맛(taste), 외관(appearances), 질감(viscosity), 종합적 평가(overall acceptability) 등의 관능평가를 실시한 결과 중 색에 대한 기호도는 냉동분쇄 0.1% 송이양갱이 가장 높은 것으로 나타났으나, 집단간 유의한 차이는 나타나지 않았고, 냄새는 동결건조 0.1%의 송이양갱이 3.38로 가장 점수가 높았으며, 냉동분쇄 0.3%의 송이양갱이 2.81로 가장 낮은 기호도를 나타내었다. 맛에서는 p<0.01수준에서 집단간 유의한 차이를 나타내었는데, 동결건조 0.1%가 그 중 가장 높은 기호도를 나타내었으며, 그 다음이 동결건조 0.5%였다. 가장 낮은 선호도를 나타낸 것은 열풍건조 0.5%였다. 질감은 P<.05 수준에서 집단간 유의미한 차이를 나타내었으며 동결건조 0.1%가 가장 높은 기호도를 나타내었으며, 동결건조 0.5%함유 송이양갱이 1.21로서, 현저히 낮은 기호도를 나타내었다. 종합적인 평가에서는 동결건조 0.1%함유

• Korean Chemical Engineering Research
• /
• v.53 no.2
• /
• pp.181-192
• /
• 2015

The aim of this study is to obtain optimum process condition for using two tower distribution to recycle the waste Propylene Glycol Monomethyl Ether Acetate (PGMEA) that is formed after washing LCD. The optimum process condition for the content of PGMEA, which is dependent variable, at 1st distillation was calculated according to Bottom temperature (BTM temperature), Reflux amount, Feed amount, Feed temperatures, and the optimum process conditions and optimum factors for the content of PGMEA at 2nd distillation according to Bottom temperature (BTM temperature), Reflux amount, Feed amount, Feed temperatures. At 1st distillation, Reflux amount, Feed amount, and Feed temperature are significant variables. However, it is found that the BTM temperature range is not significant in the range of process condition used in this study. The optimum process conditions are based on $5700{\ell}$ of Feed amount, $2500{\ell}$ of Reflux amount, $165^{\circ}C$ of BTM temperature, and $130^{\circ}C$ of Feed temperature. For the this condition, the predicted content of PGMEA was calculated as 92.12~94.62%. Significant factors at 2nd distillation are Reflux amount, Feed amount, and BTM temperature. Multicollinearity is between Reflux amount and BTM temperature. BTM was omitted in the multiple regression equation because there is a strong positive correlation between Reflux amount and BTM temperature. Base on $199^{\circ}C$ of BTM temperature, The optimum process conditions are based on $4275{\ell}$ of Feed amount, $6200{\ell}$ of Reflux amount and $130^{\circ}C$ of Feed temperature. In this condition, the predicted content of PGMEA was calculated as 99.0~99.5%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.12
• /
• pp.825-830
• /
• 2014

$[(Co_{1-x}Cu_x)_{0.2}(Ni_{0.3}Mn_{0.7})_{0.8}]_3O_4$ ($0{\leq}x{\leq}1$) thin films prepared by metal organic decomposition process were fabricated on SiN/Si substrate for infrared sensor application. Their structural and electrical properties were investigated with variation of Cu dopant. The $[(Co_{1-x}Cu_x)_{0.2}(Ni_{0.3}Mn_{0.7})_{0.8}]_3O_4$ (CCNMO) film annealed at $500^{\circ}C$ exhibited a dense microstructure and a homogeneous crystal structure with a cubic spinel phase. Their crystallinity was further enhanced with increasing doped Cu amount. The 120 nm-thick CCNMO (x=0.6) thin film had a low resistivity of $53{\Omega}{\cdot}cm$ at room temperature while the Co-free film (x=1) showed a significantly decreased resistivity of $5.9{\Omega}{\cdot}cm$. Furthermore, the negative temperature coefficient of resistance (NTCR) characteristics were lower than $-2%/^{\circ}C$ for all the specimens with $x{\geq}0.6$. These results imply that the CCNMO ($x{\geq}0.6$) thin films are a good candidate material for infrared sensor application.