• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.3
• /
• pp.205-210
• /
• 2000

Lead titanate thin films were fabricated on Si(100) wafer and ITO-coated glass substrates by metal organic chemical vapor deposition using ultrasonic spraying. When the ratio (Ti/Pb) of starting materials was 1.2, the films deposited on Si wafer had a single perovskite phase. The films deposited on ITO-coated glass had higher growth rate than that on Si wafer. As deposition temperature was increased from $530^{\circ}C$ to $570^{\circ}C$, dielectric constant was increased due to the increase of crystallinity and grain size. At $570^{\circ}C$, dielectric constant and dielectric loss of the films were 205 and 0.016, respectively. When the deposition temperature is higher than $600^{\circ}C$, dielectric constant was decreased.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.4
• /
• pp.167-172
• /
• 2019

The strength (MPa), hardness (Hv), shrinkage (%) and biological properties of the HAp were measured by using an organic plasticizer which facilitates the molding and heat treatment. Mechanical properties such as compressive strength, bending strength and hardness were increased with increasing amount of plasticizer, but mechanical properties were decreased when plasticizer was added more than 7 %. This is because addition of the plasticizer above the allowable value causes cracking during molding, and such cracks promote the generation of microcracks and pores at the time of sintering, resulting in a decrease in mechanical properties. As a result of the antimicrobial activity test, no bacteria were detected regardless of the addition amount of plasticizer.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.06a
• /
• pp.19-22
• /
• 1997

The surface modificaion of alumina by $Al_2$O$_3$/SiC nanocomposite coating was studied in terms of processing and microstructure. A powder slurry of 5 vol% SiC composition was dipcoated onto presintered alumina bodies and pressurelessly sintered at 1$700^{\circ}C$ for 2 h in $N_2$. The used of organic binder and plasticizer in the slurry preparation, and the control of the density of presintered alumina body were found to be necessary to avoid cracking and warping during processing. The nanocomposite coating well bonded to the alumina body with thickness about 110 ${\mu}{\textrm}{m}$. The average grain size of coating (2 ${\mu}{\textrm}{m}$) was much finer than that of alumina body (13 ${\mu}{\textrm}{m}$). Fracture surface observations revealed mostly transgranular fracture for the coating, whereas intergranular fracture for the alumina body. Some pores (about 6%) were observed in the coating layer, although the alumina body showed fully dense microstructure.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.2
• /
• pp.40-43
• /
• 2009

The authors fabricated a nanopatterned surface on a GaN thin film deposited on a sapphire substrate and used that as an epitaxial wafer on which to grow an InGaN/GaN multi-quantum well structure with metal-organic chemical vapor deposition. The deposited GaN epitaxial surface has a two-dimensional photonic crystal structure with a hexagonal lattice of 230 nm. The grown structure on the nano-surface shows a Raman shift of the transverse optical phonon mode to $569.5\;cm^{-1}$, which implies a compressive stress of 0.5 GPa. However, the regrown thin film without the nano-surface shows a free standing mode of $567.6\;cm^{-1}$, implying no stress. The nanohole surface better preserves the strain energy for pseudo-morphic crystal growth than does a flat plane.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.372-372
• /
• 2012

We have studied a fabrication of Poly (3,4-ethylenedioxythiophene) (PEDOT) wire arrays and structures with various feature sizes from hundreds micrometers to tens nanometers. PEDOT is well-known as a conducting material, can be grown by a vapor pressure polymerization (VPP) method. The VPP technique is a bottom-up processing method that utilizes the organic arrangement of macromolecules to easily produce ordered aggregates. Also, liquid-bridge-mediated nanotransfer molding (LB-nTM), which was reported as a new direct patterning method recently, is based on the direct transfer of various materials from a mould to a substrate through a liquid bridge between them. The PEDOT nanowires grown by VPP method and transferred on a substrate to use LB-nTM method have been investigated by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Selected Area Electron Diffraction (SAED), X-Ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), and electrical properties.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.275-275
• /
• 2009

CdTe(331)/Si(211) and CdTe(400)/Si(100) thin films have been grown by MOCVD(metal organic chemical vapor deposition) system for large scale of IFPAs(IR focal plane arrays). We have investigated the effect of various growth parameters on the surface morphology and structural quality. Single crystalline CdTe(331) films were grown by two stage growth method - low temperature buffer layer step and high temperature growth step. In other case, single crystal of CdTe(400) films were grown on a few atomic layer thickness of GaAs which is grown on Si(100) substrate by molecular beam epitaxy. The crystalline quality of the films was analyzed by X-ray diffraction. The surface morphology and crystal structure of CdTe films were characterized by optical microscope.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.179.1-179.1
• /
• 2015

Thickness-dependent electrical, structural, and optical properties of zinc oxide (ZnO) thin films on polyethylene terephthalate (PET) substrates were investigated in the very thin thickness range of 20 to 120 nm. A very unusual transition phenomenon, in which electrical resistance increases with an increase in film thickness, was observed. From structural and compositional analyses, this transition behavior was explained to arise from metallic Zn agglomerates dispersed in non-crystalline Zn-O matrix. It was unveiled that film thickness more than 80 nm is required for the development of hexagonal crystal structure of ZnO. ZnO films on PET substrates exhibited high optical transmittance and good mechanical flexibility in the thickness range. The results of this study would provide a valuable guideline for the design of ZnO thin films on organic substrates for practical applications.

• 한국경영정보학회:학술대회논문집
• /
• 2008.06a
• /
• pp.585-589
• /
• 2008

LCD (Liquid Crystal Display)는 디지털 기기의 주요 구성 요소이며, 모든 크기의 FPD (Flat Panel Display) 시장에서 지배적인 시장점유율을 보인다. 그러나 많은 전문가들은 LCD 산업이 수년 내에 OLED (Organic Light Emitting Diodes), 3차원 디스플레이, 플렉서블 디스플레이와 같은 차세대 디스플레이 기술의 강력한 도전에 직면할 것이라고 예상한다. 이러한 경쟁환경에서 LCD 산업이 살아남기 위한 방안으로 본 연구에서는 LCD 산업의 경쟁력의 원천을 밝혀내고, 이를 극대화하는 전략적 방향을 제시한다. 이를 위해 먼저 LCD 산업구조와 가치사슬을 분석하여 LCD 산업의 경쟁력을 제고하기 위한 기본적인 전략적 대안을 개발한다. 이 단계에서 얻어진 통찰력을 바탕으로, 인과지도(causal loop diagram)와 시스템 다이나믹스 (system dynamics) 방법론을 활용하여 기존의 LCD 산업구조에서 판매량, 시장점유율 및 이익 등의 핵심 지표에 가장 큰 영향을 미치는 구조적 특징을 규명한다. 또한, 여기서의 다이나믹스 모형을 바탕으로, LCD 제조업자의 관점에서 프로세스 역량을 극대화할 수 있는 전략적 대안을 모색한다.

• Korean Journal of Veterinary Research
• /
• v.50 no.4
• /
• pp.259-264
• /
• 2010

Melamine is an organic base and a trimer of cyanamide which contains 66% nitrogen by mass, but it was sometimes illegally added to food products in order to enhance the apparent protein content for the bigger profit. Many Chinese infants and pet animals fed melamine-containing formulas suffered acute kidney failure with renal crystal formation. Fish feeds were also recently found to be contaminated with melamine. This experiment has been designed to determine whether renal crystals can be experimentally induced in crucian carp (Carassius carassius) fed melamine and cyanuric acid (each at 400 mg/kg/day for 3 days) in combination, and to compare experimentally induced crystals with those from pet animals with triazine related renal failure. The results showed that all fish developed gold brown renal crystals arranged in radial spherulites in the renal tubules, similar to those detected in the pet animals.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.757-758
• /
• 1992

At-cut quarts crystal has been applied as chemical vapour sensors. The responses of quartz crystal at 9 MHz coated with various lipids were determined for organic gases which showed different affinities for each lipid. The identification of odorants depending on the species of lipid used for coating is discussed in terms of the normalized resonant frequency shift pattern.