• Asian-Australasian Journal of Animal Sciences
• /
• 제29권7호
• /
• pp.965-970
• /
• 2016

This study was conducted to determine the effects of freezing and supplementation of molasses (M), lactic acid bacteria (LAB) and LAB+enzyme mixture on chemical and nutritional composition of sunflower silage (SF). Sunflower crops were harvested (at about $29.2%{\pm}1.2%$ dry matter) and half of fresh sunflower was ensiled alone and half was frozen (F) at $-20^{\circ}C$ for 7 days. Silage additives were admixed into frozen SF material. All samples were ensiled in glass jars with six replicates for 90 days. The treatments were as follows: i) positive control (non-frozen and no additives, NF), ii) negative control (frozen, no additives, F), iii) F+5% molasses (FM), iv) F+LAB (1.5 g/tons, Lactobacillus plantarum and Enterococcus faecium, FLAB); v) F+LAB+enzyme (2 g/tons Lactobacillus plantarum and Enterococcus faecium and cellulase and amylase enzymes, FLEN). Freezing silage increased dry matter, crude ash, neutral detergent fiber, and acid detergent lignin. The organic matter, total digestible nutrient, non-fiber carbohydrate, metabolizable energy and in vitro dry matter digestibility were negatively influenced by freezing treatments (p<0.05). In conclusion, freezing sunflower plants prior to ensiling may negatively affect silage quality, while molasses supplementation improved some quality traits of frozen silage. Lactic acid bacteria and LAB+enzyme inoculations did not effectively compensate the negative impacts of freezing on sunflower silage.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 추계학술발표회 초록집
• /
• pp.56-56
• /
• 2001

Ni-W alloy deposit is one of the best alternatives to hard chromium plating because of its good mechanical properties (high hardness, high strength, and good wear resistance). Ni-W alloy is deposited from weakly acidic or alkaline electrolytic bath with nickel sulfate, sodium tungstate or APT, and some kinds of organic hydroxy-acid complex and ammonia salts. W content of the deposit can be changed from 0 to 5Owt% and the coating with high W content is more attracted. But, meanwhile, the deposited layers are always found high internal stress, which cause them to become brittle and to bond insufficiently with the substrate. On the second hand, as the W content is incresed, the current efficiency reduced, which results in large quantities of hydrogen evolution and then produces bubbles on surface and pitting appearance In this paper, the influence of some additives on Ni-W alloy electroplating was investigated by means of compositional analysis and SEM. The initial results showed that 2-butyne-1,4-diol was the best brightener for Ni-W plating process. It could brighten and level deposit, but decreased the cathodic current efficiency. Its optimum concentration range is from O.lgjL to 0.5gjL. Besides, three kinds of additives including 2-butyne-1,4-diol were examined with Dagguchi method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.158-161
• /
• 2003

The primary aim of this study is to investigate new semi-abrasive free slurry including acid colloidal silica and hydrogen peroxide for copper chemical-mechanical planarization (CMP). In general, slurry for copper CMP consists of colloidal silica as an abrasive, organic acid as a complex-forming agent, hydrogen peroxide as an oxidizing agent, a film forming agent, a pH control agent and several additives. We developed new semi-abrasive free slurry (SAFS) including below 0.5% acid colloidal silica. We evaluated additives as stabilizers for hydrogen peroxide as well as accelerators in tantalum nitride CMP process. We also estimated dispersion stability and Zeta potential of the acid colloidal silica with additives. The extent of enhancement in tantalum nitride CMP was verified through anelectrochemical test. This approach may be useful for the application of single and first step copper CMP slurry with one package system.

• 한국미생물·생명공학회지
• /
• 제24권2호
• /
• pp.222-226
• /
• 1996

The enzymatic synthesis of 3, 4-dihydroxyphenyl-L-alanine (L-DOPA) was examined for the effects of the reaction additives such as sodium borate, alcohol, and organic solvents. The enzyme used was tyrosine phenol-lyase of Citrobacter freundii KCTC 2006 produced in Escherichia coli. The amounts of tyrosine phenol-lyase and pyridoxal-5-phosphate were optimized to 2.0 units/ml and 0.1 mM, respectively, for the synthetic reaction. Sodium borate, a substance that forms a complex with pyrocatechol, reduced the enzyme deactivation by pyrocatechol although it seriously inhibited the enzyme activity. Among the organic solvents tested, dimethylsulfoxide, dimethylformamide, and alcohol increased the productivity of the L-DOPA synthesis. In a reaction system with 5% methanol, L-DOPA concentration increased up to 210 mM after 24 hours, and 77.1% of which was separated as precipitates. The L-DOPA was purified to 99.96% by solubilizing and recrystallyzing the precipitates.

• 한국전기전자재료학회논문지
• /
• 제31권3호
• /
• pp.129-134
• /
• 2018

Herein, we report the manufacture of high-performance, ambipolar organic field-effect transistors (OFETs) and complementary-like electronic circuitry based on a blended, polymeric, semiconducting film. Relatively high and well-balanced electron and hole mobilities were achieved by incorporating a small amount of ionic additives. The equivalent P-channel and N-channel properties of the ambipolar OFETs enabled the manufacture of complementary-like inverter circuits with a near-ideal switching point, high gain, and good noise margins, via a simple blanket spin-coating process with no additional patterning of each active P-type and N-type semiconductor layer.

• 한국유기농업학회지
• /
• 제20권1호
• /
• pp.91-99
• /
• 2012

This study was conducted to develop a functional feed additive for pig with spent $Lycium$ $chinense$ Mill fruit. We investigated the optimum conditions for the extraction of polyphenol from spent $Lycium$ $chinense$ Mill using methanol. Methanol concentration as a solvent for extraction, extraction time and the volume of solvent per a gram of solid (ground spent Lyceum chinense Mill) were selected as parameters. Three levels of parameters were configured according to Box Behnken experiment design, a fractional factorial design, and total 15 trials were employed. Total polyphenol concentration from each trial was used as response from experiment system and effects of parameters on total polyphenol extraction efficiency were determined using response surface model. As a result, all terms in analysis of variance, regression ($p$ = 0.001), linear ($p$ = 0.002), square ($p$ = 0.017) and interaction ($p$ = 0.047) was significant and adjusted determination coefficient ($R^2$) was 94.7%. Total polyphenol extraction efficiency was elevated along increased methanol content and decreased solvent to solid ratio. However extraction time did not affect the efficiency. This study provides a primary information for the optimum extraction conditions to maximize total polyphenol recovery from spent Lycium chinens Mill fruit and this result could be applied to re-use of argo-industrial by-products and to develop of functional feed additives in organic farming.

• 한국세라믹학회지
• /
• 제35권9호
• /
• pp.958-968
• /
• 1998

Porous silica ceramics were prepared using DCCA(Drying Control Chemical Additives) Such as uncharged polymer(Polyethylene glycol) and protein (Lipase) under H2O/Low-grade TEOS=10 C2H5OH/Low-grade TEOS=1 HC1/Low=grade TEOS=0.01 After Plain which doesn't added DCCA and samples of 11 sorts which varied molecular weight of PEG(Mw=600, 1000, 2000) quantity of Lipase and concentration of wat-er were synthesized gellation time and thermal analysis were investigated. After heat-treated at 600, cry-stal structures analyses of SiO2 polymer and characteristics of pores were investigated. Gellation time was retarded about 2-6 times as compared with plain resulting in addition of DCCA and crystal structures ex-hibited amorphous state. Moreover as increase of water a short gellation time was obtained. The samples added PEG showed increase of specific surface areas up to 20-40% and had micropores while those of Lipase were decreased about 90% and showed broad pore size distribution.

• 한국미생물·생명공학회지
• /
• 제19권4호
• /
• pp.368-371
• /
• 1991

Ethylene glycol, glycerol, sorbitol 그리고 sucrose가 Bacillus stearothermophilus가 생산하는 cyclodextrin glucanotransferase(CGYase)의 열안정성에 미치는 영향을 조사하였다. Glycerol, sorbitol 그리고 sucrose가 CGTase의 열안정성에 효과가 있었다. 이 효과는 첨가물의 농도와 밀접한 관계가 있었다. n-Butanol, 1,4-dioxane그리고 n-octane과 같은 유기 용매에서 CGTase의 열안정성을 조사하였다. 1,4-dioxane 과 n-octane은 CGTase의 열안정성을 증가시켰다. 특히, n-octane에서 CGTase를 $75^{\circ}C$에서 90분간 정치시킨 후에도 원래 효소활성의 81를 유지하였다.

• International Journal of Concrete Structures and Materials
• /
• 제3권2호
• /
• pp.97-101
• /
• 2009

It has been known that acid-resistant concretes on the liquid glass basis have high porosity (up to 18${\sim}$20%), low strength and insufficient water resistance. Therefore they can not be used as materials for load-bearing structural elements. Significant increasing of silicate matrix strength and density was carried out by incorporation of special liquid organic alkali-soluble silicate additives, which block of superficial pores and reduces concrete shrinkage deformation. It was demonstrated that introduction of tetrafurfuryloxisilane additive sharply increases strength, durability and shock resistance of silicate polymer concrete in aggressive media. This effect is attributable to hardening of contacts between silicate binder gel globes and modification of alkaline component owing to "inoculation" of the furan radical. The optimal concrete composition with the increased strength, chemical resistance in the aggressive environments, density and crack resistance was obtained.

• 한국표면공학회지
• /
• 제47권3호
• /
• pp.116-120
• /
• 2014

The addition of cyclo propane carbonyl (cpc) to chromium electroplating bath resulted in a chromium deposit which had greatly improved mechanical properties compared to conventional chromium deposits in condition of heat treatment at high temperature. The as-deposited layers had a Vicker's hardness of about 1170, which is comparable to that of conventional chromium plating deposits. With annealing, the hardness goes through a maximum of 1650 at $600^{\circ}C$. Generally speaking, the hardness of conventional plating decreases monotonically with heat treatment. X-ray diffraction show that annealing up to above $400^{\circ}C$ causes formation and growth of chromium crystallites and that chromium carbides form at above $500^{\circ}C$ temperature.