• Journal of the Korean Statistical Society
• /
• v.26 no.1
• /
• pp.89-100
• /
• 1997

In this paper we are concerned with comparing ordered treatment effects with a control in a randomized block design with multiple observations per cell. Two nonparametric procedures for detecting which treatment are better than the control are proposed and compared. An example is given and the results of a Monte Carlo power study are discussed.

• Journal of the Korean Society for Heat Treatment
• /
• v.26 no.1
• /
• pp.1-6
• /
• 2013

The B2-ordered NiAl has attracted much attention as one of the candidates as a next generation high temperature material, because it has a high melting temperature, a low specific gravity and an excellent high temperature oxidation resistance. However, the application of NiAl to structural materials needs the improvement of its brittleness at room temperature. The study was carried out on the relation between several properties of NiAl and some variation of Ni content within NiAl phase, which means deviations from the stoichiometric composition. The main results were as follows; (i) Good ductility was obtained at the testing temperature more than 1073 K irrespective of Ni content. (ii) Increasing Ni content offered preferable tensile properties. (iii) Every NiAl with varying Ni contents showed the superior oxidation resistance.

• Korean Journal of Materials Research
• /
• v.12 no.11
• /
• pp.856-859
• /
• 2002

To investigate effects of heat treatments including grain size control in substrate aluminum on nanopore arrays in anodic alumina template, aluminum was heat treated at $500^{\circ}C$ for 1h. The heat treated aluminum was anodized by two successive anodization processes in oxalic solution and the nanopore arrays in anodic alumina layer were studied using TEM and FE-SEM. The highly ordered porous alumina templates with 110 nm interpore distance and 40 nm pore diameter have been observed and the pore array of the anodic alumina has a uniform and closely-packed honeycomb structure. In the case of alumina template obtained from heat treated aluminum substrate, the well- ordered nanopore region in anodic alumina increased and became more homogeneous compared with that from non-heattreated one.

• Korean Journal of Veterinary Research
• /
• v.37 no.2
• /
• pp.281-289
• /
• 1997

The study was designed to investigate the effects of progesterone and estrogen on the uterus of rats by immunohistochemical methods using Proliferating Cell Nuclear Antigen (PCNA) antibody. Eighteen female rats(Wistar), weighing initially about 300g, were ovariectomized. These rats were divided into four groups, progesterone-treated group, estrogen-treated group, estrogen+progesterone-treated group, and control group, progesterone-treated group was injected with 1mg of progesterone per rat per day for 2 days and estrogen-treated group with $20{\mu}g$ of $17{\beta}-estradiol$ for 3 days and estrogen+progesterone-treated group with $17{\beta}-estrdiol$ for 3 days and then with progesterone for 2 days as above. In gross findings, the uteri were markedly hypertrophied by estrogen treatment but were not affect in size by progesterone treatment. Immunohistochemical investigation was performed on the cell types with higher appearance of PCNA positive reaction cells in four groups. The groups with higher appearance of the stromal cells were ordered as estrogen-treated group, progesterone-treated group, estrogen+progesterone-treated group, and control group. The muscle cells were ordered as progesterone-treated group, estrogen-treated group, estrogen+progesterone-treated group, and control group. Positive reaction cells of the stromal cells were total 4.6 times higher than those of muscle cells. Therefore, the affect of the hypertrophy on the uterus by estrogen was larger than those of progesterone and affect on the uterus by stromal cells were larger than those of muscle cells. The group with more PCNA positive reaction cells of luminal epithelial cells were ordered as control group, progesterone-treated group, estrogen+progesterone-treated group, and estrogen-treated group, and glandular epithelial cells were ordered as estrogen+progesterone-treated group, progesterone-treated group, control group, and estrogen-treated group. It was suggested that estrogen and progesterone did not affect on the proliferating cells of luminal epithelial cells and affection of progesterone on the development of glandular epithelial cell was larger than that of estrogen.

• Journal of the Korean Statistical Society
• /
• v.15 no.1
• /
• pp.9-25
• /
• 1986

In this paper we propose a distribution-free rank test for ordered alternatives in a randomized block design and investigate the properties of the proposed test. The proposed test is an extension of the Page test to allow replications in each cell. Some asymptotic properties including ARE's are investigated. A small sample Monte Carlo study was performed to compare the powers of the test considered in this paper for small samples. The results show that our proposed test is robust and efficient in the case of equally-spaced treatment effects.

• Nano
• /
• v.13 no.10
• /
• pp.1850120.1-1850120.9
• /
• 2018

Two-dimensional poly(dimethylsiloxane) (PDMS) films with wavy patterns were studied in order to investigate reversible and irreversible wetting effects. Pre-strained, surface oxidized layers of PDMS were used to form relieved wavy geometries, on which hydrophobic functionalization was carried out in order to produce irreversible wetting effects. Wavy-patterned PDMS films showed time-dependent reversible wetting effects. The degree of surface wettability could be tuned by the choice of wavy groove geometries. And the groove geometries were controlled via $O_2$ plasma treatment and mechanical pre-straining. The pre-strained, buckled PDMS films were applied to the fabrication of hydrophobic polystyrene nano-patterns using colloidal self-assembly, where the colloids were arrayed in two-dimensional way. The wavy polystyrene films were found to be more hydrophobic relative to flat polystyrene films. The grooving methodology used in this study could be applied to enhancing the hydrophobicity of other types of polymeric thin films, eliminating the need for chemical treatment.

• Journal of the Korean Magnetics Society
• /
• v.11 no.4
• /
• pp.173-178
• /
• 2001

The effects of heat-treatment with magnetic or non-magnetic field on magnetic properties of gas-atomized MPP dust cores subjected to various cooling processes after annealing were investigated. Upon magnetic-field annealing, ac permeability and core loss decreased with the increase of cooling rate, which were attributed to the generation of inhomogeneous internal stress and anomalous eddy current loss, respectively. It was not observed the formation of ordered phase and the related change in magnetic properties at the cooling stage for MPP dust cores. In MPP alloys, magnetic anisotropy was easily induced through the directional order, and permeability and core loss were changed under the conditions of low cooling rate and magnetic annealing.

• Macromolecular Research
• /
• v.9 no.4
• /
• pp.185-196
• /
• 2001

The self-assembly of block copolymers can lead to a variety of ordered structures on a nanometer scale. In this article, the self-assembling behaviors of triblock copolymers in the melt and the selective solvent are described with the results obtained from the computer simulations. With the advances of computing power, computer simulations using molecular dynamics and Monte Carlo techniques make it possible to study very complicated phenomena observed in the self-assembly of triblock copolymer. 13king full advantage of the computer simulation based on well-defined model, the effects of various structural and thermodynamic parameters such as the copolymer composition, the block sequence, the pairwise interaction energies, and temperature on the self-assembly are discussed in some detail. Some simulation results are compared with experimental ones End analyzed by comparing them with the theoretical treatment.

• Korean Journal of Organic Agriculture
• /
• v.30 no.1
• /
• pp.1-20
• /
• 2022

With the recent rapid increase in single-person households, food companies are releasing small packaging and small-capacity products regardless of product line such as beverages, fresh foods, and home snacks, and food consumption patterns are also changing. Meanwhile, as a series of accidents related to food safety occurred during cost-effective consumption pursuing price-performance, more consumers wanted to choose products that have been proven safe even with higher money due to food safety anxiety. Considering the concept of 'safety' of food, this study by using the 'ordered probit model' empirically investigated whether there is a difference in the degree of preference for safety in food consumption behavior between single-person and multi-person households. Summarizing the results, it was found that women rather than men, and elderly households among young and single-person households had a higher demand for food safety. The results of marginal effects considering food safety variables show that respondents with low frequency of delivery and take-out use are considering food safety more, and that single-person households are considering safety more than multi-person households. In the future, the population structure of Korea will continue to increase in single-person and elderly households, and women's economic activities will also continue to increase. Therefore, the growing home convenience food market needs marketing strategies to secure and emphasize food safety, such as sterilizing treatment technology for hygiene and safe container development from environmental hormones, and needs a lot of support and attention to meet changes in food culture trends and demographic structure.

• The korean journal of orthodontics
• /
• v.50 no.6
• /
• pp.391-400
• /
• 2020

Objective: Increased gingival elasticity has been implicated as the cause of relapse following orthodontic rotational tooth movement and approaches to reduce relapse are limited. This study aimed to investigate the effects of sulforaphane (SFN), an inhibitor of osteoclastogenesis, on gene expression in gingival fibroblasts and relapse after rotational tooth movement in beagle dogs. Methods: The lower lateral incisors of five beagle dogs were rotated. SFN or dimethylsulfoxide (DMSO) were injected into the supra-alveolar gingiva of the experimental and control group, respectively, and the effect of SFN on relapse tendency was evaluated. Changes in mRNA expression of extracellular matrix components associated with gingival elasticity in beagles were investigated by real-time polymerase chain reaction. Morphology and arrangement of collagen fibers were observed on Masson's trichrome staining of buccal gingival tissues of experimental and control teeth. Results: SFN reduced the amount and percentage of relapse of orthodontic rotation. It also decreased the gene expression of lysyl oxidase and increased the gene expression of matrix metalloproteinase (MMP) 1 and MMP 12, compared with DMSO control subjects. Histologically, collagen fiber bundles were arranged irregularly and were not well connected in the SFN-treated group, whereas the fibers extended in parallel and perpendicular directions toward the gingiva and alveolar bone in a more regular and well-ordered arrangement in the DMSO-treated group. Conclusions: Our findings demonstrated that SFN treatment may be a promising pharmacologic approach to prevent orthodontic rotational relapse caused by increased gingival elasticity of rotated teeth in beagle dogs.