• Journal of the Optical Society of Korea
• /
• 제17권4호
• /
• pp.336-343
• /
• 2013

Recently various types of driver assistance systems have been used for automobiles. In 2008, the U.S Congress passed a law which required that most cars be equipped with devices to warn objects behind the vehicle. Because of that, market of rear view cameras is expected to rise dramatically. Therefore many suppliers try to provide a wide angle camera for car makers. But a high distortion is caused by the wide angle might result in lower image quality. In order to improve the image quality, normally we use an algorithm to correct a distortion. Though we can improve the distorted image by correction algorithm, we must pay more cost to use it. In this paper, we propose a new optical system reducing a distortion in contrast to a conventional lens without cost. In other words, we can see only an area of interest. That is similar to reducing a field of view. Using a new optical system, we can get a less distorted image. In order to view an area of interest, we introduce an off axis optical system having refractive surfaces and reflective surfaces. In this paper, we describe the results of design and, evaluation of an off axis wide angle compact imaging system. In comparison to conventional wide angle lens, we can get the improvement of MTF, distortion, and lateral color aberrations. And we also can reduce a total cost because we don't need the outer apparatus or bracket to mount on the car.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제16권5호
• /
• pp.91-97
• /
• 2016

This paper evaluates the equalization algorithm of FC-MMA (Fast Convergence-Multi Modulus Algorithm) and RMMA (Region based Multi Modulus Algorithm) for the compensation of intersymbol interference which is due to the distortion of communication channel. In order to obtain the error signal for adaptive equalization, the FC-MMA use the modified dispersion constant considering the number of signal symbol, the RMMA separates the 4 region which every symbol points are located, then reduce the symbol point based on this region into constant modulus symbol point. By applying the different principle in order to get the error signal for the updating the tap coefficient of adaptive equalizer, it has the different equalization performance by these error signal. The computer simulation was performed in order to compare the different equalization performance in this paper. The performance index includes the output signal constellation, the residual isi and maximum distortion that is for the convergence characteristics, the SER. As a result of computer simulation, RMMA has more good performance in the residual isi, maximum distortion after in steady state and SER performance than FC-MMA, but not in convergence speed to reach the steady state.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 2003년도 The 8th Asian Symposium on Precision Forging ASPF
• /
• pp.73-79
• /
• 2003

Recently many kinds of gears have been produced by forging in order to enhance the mechanical properties of the gears and the productivity of the process. Developments in forging technology are the reason for the increased usage. However, a critical problem of the forged gears is the dimensional change or distortion caused by elastic recovery after forging, and relief of the residual stresses during subsequent heat treatments. Distortion is of great concern to the manufacturers of precision parts, because it influences directly the dimensional accuracy and the grade of carburized bevel gears. In the present paper, distortion due to cold forging and heat treatment of bevel gears is investigated. Distortions of forged gears, machined gears and die are measured and compared. Numerical analysis is used to simulate the complete cold forging process and heat treatment process for the machined gears and shows good agreement with the experimental measurements.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• 제41권6호
• /
• pp.165-173
• /
• 2004

H.264 is the newest international video coding standard that provides high coding efficiency. A macroblock in H.264 has 7 different motion-compensation block sizes in the Inter mode, and several different prediction directions in the Intra mode. In order to achieve as highest coding efficiency as possible, H.264 reference model employs complex mode decision technique based on rate-distortion (RD) optimization which requires high computational complexity. In this paper, we propose two techniques -'early SKIP mode decision' and 'selective intra mode decision' - which can further reduce the computational complexity. Simulation results show that without considerable performance degradation, the proposed methods reduce encoding time by 30% on average and save the number of computing rate-distortion cost by 72%.

• Journal of the Society of Naval Architects of Korea
• /
• 제45권1호
• /
• pp.93-100
• /
• 2008

There are two ways of conventional thermal distortion analysis. One is the thermal elasto-plastic analysis and the other is the equivalent forces method based on inherent strain. The former needs exorbitant analysis time, while the latter cannot obtain results of stress field and it needs much time consumption with loads modeling on curved plates. Such faults in two methods have made difficulties in thermal distortion analysis of a large structure like ship hull. In order to solve them, new kind of thermal distortion analysis method was developed. We devised that the inherent strains was used as direct input factors in forms of boundary conditions. It was embodied by using thermal expansion coefficient in commercial code. We used the pre-calculated inherent strain as thermal expansion coefficient, and endowed nodes with imaginary temperatures. This method was already adopted at hull block welding distortion analysis which was considered as impossible, and gave productive results such as reduction of work time in the dry dock.

• Journal of Welding and Joining
• /
• 제30권5호
• /
• pp.51-56
• /
• 2012

The purpose of this study is to evaluate the distortion and the residual stress of GTA tubular welds between tube and head. In order to do it, the heat input model for GTA welding process was first developed by experiment and FE analyses. The welding distortion and the residual stress distribution of the tubular welds according to welding pass and various restraint degrees were evaluated by using FEA with the heat input model. From FEA results, it was found that the residual stress and the radial distortion at the weld toe of tube part decrease with a decrease in the number of welding pass. However, the maximum residual stresses in each direction of tubular welds are almost constant regardless of the external restraint degree. It was mainly due to the high internal restraint of the welds.

• Journal of the Society of Naval Architects of Korea
• /
• 제44권6호
• /
• pp.598-604
• /
• 2007

The purpose of this study is to establish the predictive method of welding distortion and residual stress for the channel I butt SA (submerged arc) weldment using FEA. In order to do it, the heat input model for the weldment was defined as the combined heat source with the surface heat flux of gaussian distribution and volumetric heat source uniformly distributed within weld groove by comparing the shapes of molten pool and temperature distribution obtained by FEA with those of experiments. The arc efficiency of SA welding for two-dimensional FE analysis was evaluated as 0.85. The welding distortion and residual stress of the weldment obtained by FEA and heat input model proposed have a good agreement with those obtained by experiment. Based on the results, it was suggested that the proper heat input model should be required to evaluate the welding distortion for weldment.

• Journal of Integrative Natural Science
• /
• 제12권2호
• /
• pp.35-43
• /
• 2019

In the content-based image search properties, form information is simple because only the contours of objects are available, and although it can effectively extract the characteristics of the objects, it is sensitive to external noise. The radial distortion, one of these noises, is most prominent in the eyewear and, due to the structural characteristics of the imaging equipment, radiative distortion occurs in almost all imaging equipment. It is very important to determine the similarity of the objects in the images in which these distortions occurred to the actual objects. In order to improve this problem, we propose a strong image search technique for formative noise and radiative distortion using regularization phase angles and moments. Through simulation using Wang DB, the proposed algorithm proved excellent performance for radiation distortion that occurs in general. In addition, a system optimized for database can be implemented by making appropriate changes to the threshold values, enabling image retrieval with the desired level of confidence in various systems. The algorithm proposed in this paper is expected to be utilized as an optimal imaging system by extracting morphological form information of multimedia data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제22권1호
• /
• pp.64-71
• /
• 1997

Digital communication channels are imparied by linear effects such as dispersion, ISI(intersymbol Interference), fading phenomenon etc. But, the practical channel equalization system is required to design for compensating the nonlinear distortion caused by harmonic distortion etc. This paper is a study on the performance of nonlinear channel equalization using RBF(Radial Basis Funclion) network, which has the equivalent structure to the optimal Basian filter. Expecially, the variance of RBF network is modifiedby nonlinear polynomial filters to compare the convergence characteristic of nonlinear channel equalization. Experimental results show that the modified RBF network achieves the faster convergence property than conventional RBF network. Moreover, the RBF network ofhigher order variance modified represents the better performance than that of lower order variance in the bandpass channels and second/third order polynomial channels.

• Journal of Digital Convergence
• /
• 제13권8호
• /
• pp.457-463
• /
• 2015

The image distortion field has been studied and applied variously in the fields of engineering and art. This research is to express artistic sense by using the engineering technology on image distortion. In order to do this, the paper first examines the aesthetic interpretations on artistic expressions of image distortion. Then, it explains that image distortion using magnetic force can be an artistic expression method and includes user immersion elements. In addition, it demonstrates that image distortion can be used as an artistic emotional expression based on interaction. This research will contribute to the production and development of creative emotional contents through the convergence of scientific technology and art.