• Journal of information and communication convergence engineering
• /
• 제7권3호
• /
• pp.247-252
• /
• 2009

The Internet has made a huge impact on the way we, as humans, communicate. During the last decade a series of new communication mediums have emerged and communication protocols have come and gone. This puts new requirements on the development process and architecture of the communication platforms, operated by communities, in order to proactively ensure support for future communication protocols. Even further, additional requirements are added when the software itself will be maintained by a community. In this paper we explore the world of Open Source Software. We present our suggestions of usable design-principles and our process in developing a sustainable information system.

• 한국전자통신학회논문지
• /
• 제12권6호
• /
• pp.1035-1042
• /
• 2017

본 논문에서는 복잡한 전관방송 장비와 케이블을 용이하게 운용하고, 확장 및 증설할 수 있도록 전력선 통신을 이용한 전관방송 시스템을 개발하였다. 전력선 통신 기반 전관방송 시스템은 디지털 스트리밍 변조 방식을 적용한 제어 보드와 스피커 보드로 구현되었으며, 오디오 최대 출력, 오디오 채널 응답 시간, 오디오 출력 SNR, 그리고 오디오 출력 THD+N에 대한 성능 측정을 실시하여 만족스러운 결과를 확인할 수 있었다.

• Journal of Electrical Engineering and Technology
• /
• 제3권3호
• /
• pp.408-421
• /
• 2008

In this paper, the parallel operation for a FC generation system is introduced and designed in order to increase the capacity for the distributed generation of a proton exchange membrane fuel cell (PEMFC) system. The equipment is the type that is used by parallel operated PEMFC generation systems which have two PEMFC systems, two dc/dc boost converters with shared dc link, and a grid-connected dc/ac inverter for embedded generation. The system requirement for the purpose of parallel operated generation using PEMFC system is also described. Aspects related to the mechanical (MBOP) and electrical (EBOP) component, size, and system complexity of the distributed generation system, it is explained in order to design an optimal distributed generation system using PEMFC. The optimal controller design for the parallel operation of the converter is suggested and informative simulations and experimental results are provided.

• 한국멀티미디어학회논문지
• /
• 제17권9호
• /
• pp.1084-1091
• /
• 2014

When demand for transmitting multimedia data increases, network congestion is more likely to occur and users will suffer high loss rate as well as high delay. In order to enhance quality-of-service (QoS) of video multicasting, we need to raise transmission reliability and reduce end-to-end delay. This paper proposes a routing mechanism for a OpenFlow-based small-scale network in order to multicast video reliably with low delay. In our method, multipath routing will be applied to Multiple Description (MD) Coded video to exploit its multi-description property. Through performance evaluation, our method shows improvement on loss rate, delay and video distortion.

• 한국지능시스템학회논문지
• /
• 제14권2호
• /
• pp.201-206
• /
• 2004

This study attempted to develop a speech recognition module applied to a wheelchair for the physically handicapped. In the proposed speech recognition module, TMS320C32 was used as a main processor and Mel-Cepstrum 12 Order was applied to the pro-processor step to increase the recognition rate in a noisy environment. DTW (Dynamic Time Warping) was used and proven to be excellent output for the speaker-dependent recognition part. In order to utilize this algorithm more effectively, the reference data was compressed to 1/12 using vector quantization so as to decrease memory. In this paper, the necessary diverse technology (End-point detection, DMA processing, etc.) was managed so as to utilize the speech recognition system in real time

• 전기학회논문지
• /
• 제65권1호
• /
• pp.208-213
• /
• 2016

In order to detect the exact position of high-speed train, it is necessary to obtain location information from the transponder tag installed along the track. When the transponder tag receives the energizing signal from the train, it sends a telegram to the reader, which includes location information. In high-speed railway environment, this telegram can be corrupted by electromagnetic interference caused by onboard electric train power equipments or wayside devices. In order to assess the performance of transponder system under this harsh environment, we carried out field test using HEMU-430X. Field test results are briefly introduced and discussed for the evaluation of the transponder system under development.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.19-25
• /
• 1998

Remote fault diagnosis and maintenance system using general telecommunication network is necessary for an effective fault diagnosis and higher productivity of NC machine tools. In order to monitor machine tool condition and diagnose alarm states due to electrical and mechanical faults, a remote data communication system for monitoring of NC machine fault diagnosis and status is developed. The developed system consists of (1) remote communication module among NC's and host PC using PSTN. (2) 8 channels analog data sensing module, (3) digital I/O module for control or NC machine, (4) communication module between NC machine and remote data communication system via RS-232C, and (5) software man-machine interface. Diagnostic monitoring results generated through a successive type inference engine are displayed in user-friendly graphics. The validity and reliability of the developed system is verified to be a powerful commercial version on a vertical machining center through a series of experiments.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권11호
• /
• pp.1417-1423
• /
• 1999

Distribution system can experience the diverse events instantly and permanently. Also, it can experience high impedance fault or line drop under unbalanced situation, Accordingly, it is difficulty to identify the fault location because that data collected from distribution SCADA system may include uncertainty. This paper proposes an expert system, which can infer the faulted location the quickly and exactly for the diverse events in the distribution system. The expert system utilizes distribution SCADA function and collected data, especially, the monitoring mechanism for the normal open position switches is adopted newly in order to recognize the fault type exactly. Also, automated fault location diagnosis strategy is developed in order to minimize the spreading effect of fault obtained from the error of the system operator. The proposed strategy is implemented in C language. Especially, in order to prove the effectiveness of proposed expert system, the several scenario is simulated for the given model system. The real feeders are selected as model system for the simulation.

• 한국정보통신학회논문지
• /
• 제14권11호
• /
• pp.2385-2390
• /
• 2010

현재 우리 군에서 많이 사용하는 PRC-999K 무전기는 반이중전송방식이며 동일망에 가입한 가입자 중 한 가입자가 데이터를 송신하면 나머지 가입자는 모두 데이터를 수신하는 브로드캐스트 빙식이다. 군 사격지휘시스템에서 무선데이터통신은 지휘소와 가입자들 사이에 1:1 유니캐스트 방식을 사용하고, 데이터 충돌을 회피하기 위해 CSMA/CA 기법을 적용하며, 효율적이고 속도가 빠른 SDLC 프로토콜을 사용한다. 본 논문은 데이터 송수신 시간 단축을 위해 각 가입자에게 순차적인 주소를 할당하고 지휘소가 데이터를 1회 브로드캐스팅 하면 지정된 가입자들 이 순차적으로 데이터 충돌을 회피해가며 응답전문을 송신하는 프로토콜과 알고리즘을 제안한다.

• Journal of Pharmaceutical Investigation
• /
• 제23권2호
• /
• pp.97-102
• /
• 1993

Hospital pharmacy services are divided into dispensing affairs for inpatients and outpatients, pharmaceutical service, stock control, intravenous admixture service, drug information service, pharmacokinetic consultation service, education and research work, etc. But among those affairs, dispensing affair for outpatient is perceived as the most important work in Korea, because it is linked directly with hospital service for patients. Therefore, total computer system for dispensing area was adopted from opening point of hospital in 1989 in Asan Medical Center. Utilization of computer system for outpatient dispensing area is as follows; 1) Order communication system of prescription by Total Hospital Information System, 2) Automatic print-out system of direction for use by sticker connected with on-line net work, 3) Use of automatic tablet counting and packaging machines connected with on-line net work. Those computer system resulted in curtailment of pharmacy manpower and shortening of waiting-time for outpatient.