• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.151-155
• /
• 2001

Mobile agent technology has been the subject of much attention in the last few years, mainly due to the proliferation of distributed software technologies combined with the distributed AI research field. In this paper, we present a design of communication networks of agents that cooperate with each other for forwarding messages to the specific mobile agent in order to make the overall system location transparent. In order to make the material accessible to general intelligent system researchers, we present the general ideas abstractly in terms of the graph theory. In particular, a proxy network is defined as a directed acyclic graph satisfying some structural conditions. In turns out that the definition ensures some kind of reliability of the network, in the sense that as long as at most one proxy agent is abnormal, there agent exists a communication path, from every proxy agent to the target agent, without passing through the abnormal proxy. As the basis for the implementation of this scheme, an appropriate initial proxy network is specified and the dynamic nature of the network is represented by a set of graph transformation rules. It is shown that those rules are sound, in the sense that all graphs created from the initial proxy network by zero or more applications of the rules are guaranteed to be proxy networks. Finally, we will discuss some implementation issues.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1452-1457
• /
• 2005

In the QR Decomposition-based (QRD) decoding class, the system performance is sensitive to the error propagation. Thus, it is critical to correctly decode the previous layers. One apprach to desensitize the error propagation is to propose the optimal decoding order of layers. In this wort we propose a new extended-list Soled QRD-based (SQRD) decoding approach. In the proposed decoding scheme, the solution of the few first layers is extended as the list of promising possible solutions. By doing so, the diversity of the lowest layer is increased. As a result, the system performance is less sensitive to the error propagation than its counterparts. The proposed approach is verified by the computer simulation results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.7
• /
• pp.1210-1218
• /
• 2001

In this paper, A X-band voltage-controlled hair-pin resonator oscillator(VCHRO) is able to a local oscillator or a signal source in transmitter/receiver of a microwave communication system for mobile radar, is designed and fabricated In order to apply mobile radar system is used the hair-pin resonator stronger on shock or vibration than the dielectric resonator, and also, in order to improvement the phase noise and output power is used a system of serial feedback format A hair-pin resonator was simulated by momentum method of HP ADS and then a oscillator circuit was designed that operates at 10.525 GHz by nonlinear method in harmonic balance simulation. The HRO generated output power of 6.93 dBm at 10.525 GHz, phase noise of -57.74 dBc at 100 kHz offset from carrier and the 2'nd harmonic was suppressed -23.90 dBc.

• The Journal of Information Systems
• /
• v.25 no.2
• /
• pp.51-77
• /
• 2016

Purpose Organizations invest significant portions of their budgets in fortifying information security. Nevertheless, the security threats by employees are still at large. We discuss methods to reduce security threats that are posed by employees in organization. This study finds antecedent factors that increases or decreases employee's compliance intention. Also, the study suggests organizations' security environmental factors which influences the antecedent factors of compliance intention. Design/methodology/approach The structural equation model is then applied in order to verify this research model and hypothesis. Data were collected on 415 employees working in organizations with an implemented information security policy in South Korea. We analyzed the fitness and validity of the research model via confirmatory factor analysis in order to verify the research hypothesis, then we analyzed structural model, and derived the result. Findings The result shows that organizational commitment and peer behavior increase security compliance intention of employees, while security system anxiety decreases compliance intention. And, organization's physical security system and security communication both have influence on antecedent factors for information security compliance of employees. Our findings help organizations to establish information security strategies that enhance employee security compliance intention.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.4
• /
• pp.25-31
• /
• 2009

In this paper, the implementation of a production control system based on RFID has been studied in order to obtain an exact Cost Center data such as the name of workers included a process of work and a time period to finish the process. The cost center of a worker will be correctly obtained by checking the work time using RFID tag data and by transmitting the data to a server of ERP or POP system. And also warming up time, cleaning time, power failure, and out of order sign will be checked and calculated using the data stored in RFID tags attached in workers and machine facilities. Therefore, exact Cost Center data will be obtained by the production control system with touch screens entering the data according to the situation in real time.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.531-534
• /
• 2010

Currently the functionality of the PRC-999K radio that is widely used in Korean Army is half-duplex and the broadcasting system that all subscribers have to listen when one subscriber speaks in time. Radio data communication system configures peer-to-peer network between command post and network members in military fire control system. And the system applies CSMA/CA(Carrier Sense Multiple Access/Collision Avoidance) technique to avoid data collision. Such a data transmitting/receiving time could be reduced by allocating address in serial order to each network members. By doing that, command post need to broadcast data only one time and assigned members will reply in order without data collision. This paper provides such a protocol and algorithm.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.71-78
• /
• 2014

Method a target estimation in spatial are mobile wireless communication using network cell and GPS. It have much error that mobile wireless communication depend on cell size. GPS method can't find a target in shadow and inner area. In this paper, we estimate a target as direction of arrival method using adaptive array antenna system. Adaptive array antenna system can obtain desired signal to remove other signal This paper studied digital beamforming method in order to estimation a target. Proposed method is modified optimum weight and antenna error correction to estimation an optimal receive signal. Digital beamforming method decided a signal phase and amplitude from received signal on array antenna element. But if it is not to do error correction of received signal, system performance have decreased. Firstly, we proposed modified optimum weight in order to finding desired target. Secondly, we are error correction of antenna incident signals by optimal weight before digital beamforming method. Thirdly, throughly simulation, we showed that system performance of proposed method compare proposal method with general method. It have improved resolution of estimation target to good performance more proposed method than general method.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.4
• /
• pp.63-70
• /
• 2014

Method a target estimation in spatial are mobile wireless communication using network cell and GPS. It have much error that mobile wireless communication depend on cell size. GPS method can't find a target in shadow and inner area. In this paper, we estimate a target as direction of arrival method using adaptive array antenna system. Adaptive array antenna system can obtain desired signal to remove other signal This paper studied digital beamforming method in order to estimation a target. Proposed method is modified optimum weight and antenna error correction to estimation an optimal receive signal. Digital beamforming method decided a signal phase and amplitude from received signal on array antenna element. But if it is not to do error correction of received signal, system performance have decreased. Firstly, we proposed modified optimum weight in order to finding desired target. Secondly, we are error correction of antenna incident signals by optimal weight before digital beamforming method. Thirdly, throughly simulation, we showed that system performance of proposed method compare proposal method with general method. It have improved resolution of estimation target to good performance more proposed method than general method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.224-226
• /
• 2021

Recently, in order to increase the efficiency of the product production process, the automation of facilities and devices in the factory is in progress, and a smart factory is being built using ICT and IoT technologies. In order to organically solve many problems occurring in the smart factory, a system for monitoring the wireless communication function between facilities and devices and the manufacturing process environment of the smart factory is required. In this paper, we propose a monitoring system using a Bluetooth module, a temperature/humidity sensor and a fine dust sensor to remotely monitor the process environment of a smart factory. The proposed monitoring system collect Arduino sensor values wirelessly through Bluetooth communication.

• Tunnel and Underground Space
• /
• v.32 no.2
• /
• pp.120-130
• /
• 2022

In this study, the applicability of the microseismic monitoring system based on the underground mine communication system has been verified by operation test in the domestic underground mine. The microseismic data consists of wavelet data and meta-data for mine safety management, and both data should be transferred, stored, analyzed and managed with proper method according to the purpose and size of each data. In order to select the optimal communication system for the microseismic monitoring system considering the underground environment as well as properties of data, various types of communication system have been tested and compared during operation test after installing the optical cable communication system, 2.4 GHz and 900 MHz wireless communication system through the underground mine tunnel and overground area of the test site. The integrated microseismic monitoring software, which was developed to secure the stability of data management and ease of use, has been updated according to findings from operation test. Through the operation test of the microseismic monitoring system including the communication system and the monitoring software, the technical basis was established corresponding to various requirements of the domestic mine for adoption of the microseismic monitoring system.