• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.841-843
• /
• 2014

Mobile communication systems such as WCDMA, Wibro, LTE, etc are being developed to meet the explosively increasing demands for wireless data. These communication systems are using the power at all times. In general a base station has all of the communication systems mentioned above in order to provide a more convenient service to a number of users. The demands for wireless data are changed according to time and location. If the mobile communication systems are selectively operated according to the demand for wireless data then the consumed power can be saved. This paper describes the design and implementation of the load management system which controls the supplied power to the mobile communication infrastructures depending on the demand of wireless data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.2
• /
• pp.1355-1363
• /
• 2015

In order to maintain customer voltage within allowable limit($220{\pm}13V$), tap operation of SVR(step voltage regulator) installed in primary feeder could be carried out according to the scheduled delay time(30 sec) of SVR. However, the compensation of BESS(battery energy storage system) is being required because the customer voltages during the delay time of SVR have a difficultly to maintain within allowable limit when PV system is interconnected with primary feeder. Therefore, this paper presents modeling of SVR to regulate voltage with the LDC(line drop compensation) method and modeling of BESS to control active and reactive power bi-directionally. And also, this paper proposes the coordination control modeling between BESS and SVR in order to overcome voltage problems in distribution system. From the simulation results based on the modeling with the PSCAD/EMTDC, it is confirmed that proposed modeling is practical tool for voltage regulation analysis in distribution system.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.122-124
• /
• 2008

Interior permanent magnet synchronous motor(IPMSM) has become a popular choice in electric vehicle applications, due to their excellent power to weight ratio. In order to maximize the efficiency in such applications, this paper proposes the Adaptive-FNIS(Fuzzy Neural Network Inference System). The controllable electrical loss which consists of the copper loss and the iron loss can be minimized by the optimal d-axis current $i_d$. This paper considers the parameter variation about the motor operation. The operating characteristics controlled by efficiency optimization control are examined in detail.

• ETRI Journal
• /
• v.39 no.2
• /
• pp.245-254
• /
• 2017

In-band full-duplex (IFD) communication has recently attracted a great deal of interest because it potentially provides a two-fold spectral efficiency increase over half-duplex communications. In this paper, we propose a novel digital self-interference cancelation (DSIC) algorithm for an IFD communication system in which two nodes exchange orthogonal frequency-division multiplexing (OFDM) symbols. The proposed DSIC algorithm is based on the least-squares estimation of a self-interference (SI) channel with block processing of multiple OFDM symbols, in order to eliminate the fundamental and harmonic components of SI induced through the practical radio frequency devices of an IFD transceiver. In addition, the proposed DSIC algorithm adopts discrete Fourier transform processing of the estimated SI channel to further enhance its cancelation performance. We provide a minimum number of training symbols to estimate the SI channel effectively. The evaluation results show that our proposed DSIC algorithm outperforms a conventional algorithm.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.13-21
• /
• 2016

Since the direct-gradient (DG) method uses the Shack-Hartmann wave front sensor (SH-WFS), based on the phase-conjugation principle, for atmospheric compensation in free-space optical (FSO) communication, it cannot effectively correct high-order aberrations. While the stochastic parallel gradient descent (SPGD) can compensate the distorted wave front, it requires more calculations, which is sometimes undesirable for an FSO system. A hybrid compensation (HC) method is proposed by properly using the DG method and SPGD algorithm to improve the performance of FSO communication. Simulations show that this method can well compensate wave-front aberrations and upgrade the coupling efficiency with few computations, preferable correction results, and rapid convergence rate.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.1 no.2
• /
• pp.7-11
• /
• 2008

In order to enhance standardization and interoperability of local level systems, AHU control network was designed with basement(8 point) and basis story(15 point) and then the network was constructed by power line communication. Each devices of AHU system were programed with neuron C of $L_{ON}W_{ORKS}$ as an open protocol. As a result of a study, each devices of the network were controlled with self dispersion process by $L_{ON}W_{ORKS}$ protocol and wiring could be reduced by power line communication.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.4
• /
• pp.637-640
• /
• 2022

To maximize performance in a high-performance multicore processor system. it is essential to enable effective data communication between processing cores. Data communication between processor nodes can be broadly classified into collective and point-to-point communications. Collective communication comprises scattering and gathering. This paper presents a efficient message scattering and gathering based on processing node status. In the proposed algorithms, the transmission order is changed according to the data size of the pre-existing communication, to reduce the waiting time required until the collective communications begin. From the simulation, the performances of the proposed message scattering and gathering algorithms were improved by approximately 71.41% and 69.84%.

• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.115-120
• /
• 2020

PS-LTE, which is mentioned as a next-generation disaster network technology, is a communication technology that supports communication between terminals and group communication necessary for public safety communication based on LTE technology. Currently, Korea is establishing a PS-LTE network construction plan and installing a PS-LTE system. The world is currently making a lot of efforts to build a disaster network system using PS-LTE. However, due to the characteristics of the closed network that only the related persons can access, it can not be operated like the existing commercial network, so it is necessary to build a new network. And it is expected that many periods and costs will be required. In order to establish a disaster safety communication network efficiently, it is necessary to consider the linkage of PS-LTE network, which is newly constructed by complementing the problems such as security and access priority to existing LTE network rather than unconditional new construction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5571-5578
• /
• 2015

In this paper, we analyzed Alamouti based the MIMO-OFDM system in an underwater vertical communication channels. These in consideration both the transmission loss the multipath loss which is suitable for underwater environment are necessary method to improve the efficiency and communication performance in underwater communication. This paper is modeled in an environment that caused the error, considered each simulated the multi-path loss, transmission loss, the Doppler spread in order to implement a practical communication environment and simulated through the MIMO-OFDM system of Alamouti STBC method. The MIMO-OFDM system 2Tx-2Rx of Alamouti STBC scheme in underwater vertical communication system is obtained about 3~5 dB gain as compare with its 2Tx-1Rx scheme with reference $10^{-3}$ BER.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2431-2436
• /
• 2012

This paper is implemented simple visible light communication system by combining the communications through LED lighting. It uses a variable PD sensor to the receiver and 1~12 the LED light-emitting device to the transmitter to realize LED visible light communication. Initial distance value of the developed transmission and receiver is more than 0~1.5m for LED visible light communication, the overall system transmission rate is organized with thousands kbps variability visible light media transmission system. It was measured the performance experiment during lens wearing or not wearing in order to increase the overall efficiency of the LED module, configures the LED and PD to existing PC module for the performance analysis of the implemented research, experiments the maximum communication distance of the transmitter/receiver according to LED count and the transmission rate, check about application methods and the possibility.