• 대한치과기공학회지
• /
• 제31권1호
• /
• pp.63-74
• /
• 2009

Partial or complete prosthesis is needed when teeth are lost due to various kinds of reason. Artificial teeth recover occlusion instead of natural teeth. Artificial teeth are required of esthetics, fragile resistance and abrasive resistance. Artificial tooth is made of acrylic resin or porcelain. Nowadays, acrylic resin artificial teeth are mainly used. Acrylic resin teeth are occluded with natural teeth, gold alloy, Ni-Cr alloy or porcelain etc. Acrylic resin teeth have similar translucency, gloss of natural teeth. And it has good chemical bond with denture base material, but it has low wear resistance. The aim of this study is to compare wear resistance among several denture teeth(Endura, SR-orthosit-PE, Planustar) and between artificial resin denture teeth and opposing 3 restorative materials(gold, Ni-Cr alloy, porcelain). Wear tests were conducted with a rotating wear testing apparatus(pin-on-disk type wear tester) under conditions of rpm 180, 75 minutes and constant loading of 50N. The upper part was the cusp of maxillary first molar and the lower part was a disk type restorative materials. To make similar oral environment, water was supplied continually. The acrylic resin teeth wear was determined by weighing the cusp each 5 minutes during 75 minutes test. Vicker's hardness tester was used to evaluate the surface hardness of test specimens. The SEM was used to evaluate the wear surfaces. The results were as follows: 1. Wear rates of acrylic resin teeth opposing to the restorative materials were high in order of Porcelain, Gold, Ni-Cr alloy (p<.05). 2. Wear resistance rate opposing to the Porcelain disk, was shown in order of Endura, SR-orthosit-PE, Planustar. The wear rate of opposing to porcelain disk was above two times more than that of other groups (p<.05). 3. Wear resistance rates opposing to the Gold, Ni-Cr alloy disk, was shown in order of Endura, SR-orthosit-PE, Planustar (p<.05). 4. A degree of the surface hardness is directly proportional to the degree of wear resistance. There are statistically significant differences between each groups (p<.05).

• Journal of Nutrition and Health
• /
• 제4권4호
• /
• pp.47-56
• /
• 1971

The incidence of diabetes mellitus among Koreans as shown an increasing tendency recently, probably due to the various factors such as the improving living conditions. The majority of people are ignorant or indifferent to the nature, progress and prognosis of diabetes mellitus in Korea. 107 cases of diabetes mellitus which had been admitted to Severance Hospital between January and August, 1971 were Studied. Of these 107 cases, 22 cases were interviewed thoroughly during their hospital stay and the response to their diet therapy was carefully checked. 1) Of the 107 cases 69 cases were male and 38 cases were female; the sex ratio was 18:1. The age of the onset of the disease was as follows: 2 cases were under 20 years of age; 20 cases (18.7%) were under 40 years of age and 85 cases (79.5%) were over 40 years of age. Juvenile diabetes was less frequent when compared with developed countries. 2) Patients complaints and symptoms on admission, complications of sickness, and duration of sickness until the female discharge were also studied. We found that the incidence of tuberculosis complication in diabetes melltius was alarming (13. 8%). 3) In most cases, the control of diabetes was inadequate and diet practisis by the patients was also very poor even when they had known of the diabetes mellitus for a considerable period of time. During hospitalization 75 cases (70.0%) were controlled by diet and oral medications alone. Only 16 cases (15.0%) needed insulin injection, the remaining 16 cases required both diet control and insulin injection. 4) In general, patients received hospital diet satisfactorily. Only a few cases complained of difficulties with milk intake because of no previous dietary experience or of excessive meat orfish because they preferred vegetables and fruit. 5) Patients responded well to the dietitians interviews in the hospital but follow up study and care were poorly organized after discharge from the hospital. 6) The diet exchange 1ist published by the Korean Diabetic Association was not well received by the patients or the general puplic because it is not inexpensive and detailed instructions were not given at the time of discharge from the hospital.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.331-337
• /
• 2011

Purpose: The purpose of this study was to impact of force system change in finger spring that add helical coil one round on orthodontic force. Methods: The following conclusions were drawn from the experiment conducted after bending 90 samples with a CNC wire forming machine while changing the height and lumen size to 1mm - 3mm - 5mm and 2mm - 3mm - 4mm respectively in the coil of the force system in finger spring added with one wheel of helical coil of 18-8 stainless steel round wire (${\Phi}0.5mm$, spring hard) from Jinsung Co. in domestic market under the following conditions: Laboratory name = Instron 5942; Temperature($deg^{\circ}C$) = 18.00; Humidity(%) = 50.00; Rate 1 = 10.00000 mm/min; Compressive extension = 5.0mm. Results: When Coil height is 1, 3, 5mm and lumen size is 2, 3, 4mm reduce finger spring as mean value of compressive extension occasion maximum load(mN) increases as coil height rises, and lumen size grows to 5.0mm. And was expose that compressive load(mN) increases as coil position of finger spring rises and increase as lumen size is decrescent. Conclusion: As the adherence height of coil was raised from 1mm through 3mm to 5mm, compressive load increased. As the lumen size increased from 2mm through 3mm to 4mm, compressive load decreased. Therefore, these results suggest that it is desirable to lower the coil height and enlarge the lumen size to enhance the biomechanical efficiency of finger spring when manufacturing the finger spring for removable orthodontic devices.

• Journal of Periodontal and Implant Science
• /
• 제35권1호
• /
• pp.53-63
• /
• 2005

Number of fixtures supporting prosthesis for rehabilitation of partial edentulism in distal area is an important factor in distal area to the bone tissue response around dental implant. Optimal number and optimal positioning of dental implant has leaded to the stable condition of bone tissue and successful long-term treatment outcome. This clinical and radiographic study was performed to document and evaluate the short-term result of occlusal rehabilitation by means of implant-supported fixed prostheses (ISPs) especially for partial edentulism in distal area in patients treated for advanced periodontal disease and to verify the number of fixture affecting the bone tissue response. A total of 30 consecutive patients referred because of advanced periodontal disease were included. Before the implant therapy was initiated, periodontal treatment was performed and the outcome evaluated during at least a 6-month period. An individual maintenance care program was designed for each patient. All 75 implants were placed using a 2-stage surgical approach. The patients were divided into 2 groups, in one of which two fixtures were placed and in the other of which three fixtures were placed with tripodal geometry. Following installation of the ISPs, all patients underwent a baseline examination including evaluation of i) oral hygiene, and ii) periodontal/ peri-implant conditions, and iii) radiographs. These examinations were repeated annually during the 1 or 2-year observation period. The results were as follows: 1.No single implant was lost during the observation follow-up period. 1.The percentage of plaque harboring surfaces and bleeding units upon probing were found to be low (<10%), and no soft tissue complications were recorded. 1.Two-fixture group showed bone destruction ranged from 0.0mm to 1.5mm and the mean was 0.31mm. Three-fixture group showed more bone destruction of 0.51mm. There was no statistically difference between two groups. These results suggested that the factor for success is not the number of fixture but the strict maintenance of peri-implant tissue health and initial stability of fixture.

• Environmental Analysis Health and Toxicology
• /
• 제26권
• /
• pp.6.1-6.8
• /
• 2011

Objectives: The present study investigated the potential adverse effects of multi-wall carbon nanotubes (MWCNTs) on pregnant dams and embryonic development following maternal exposure in rats. Methods: MWCNTs were orally administered to pregnant rats from gestational day (GD) 6 through 19 at dose levels of 0, 8, 40, 200, and 1000 mg/kg/day. During the test period, clinical signs, mortality, body weights, food consumption, serum biochemistry, oxidant-antioxidant status, gross findings, organ weights, and Caesarean section findings were examined. Results: All animals survived to the end of the study. A decrease in thymus weight was observed in the highest dose group. However, maternal body weight, food consumption, serum biochemical parameters, and oxidant-antioxidant balance in the kidneys were not affected by treatment with MWCNTs. No treatment-related differences in gestational index, embryo-fetal mortality, or fetal and placental weights were observed between treated and control groups. Conclusions: The results show that 14-day repeated oral dosing of MWCNTs during pregnancy induces minimal maternal toxicity at 1000 mg/kg/day in rats. Under these experimental conditions, the no-observed-adverse-effect level of MWCNTs is considered to be 200 mg/kg/day for dams and 1000 mg/kg/day for embryonic development.

• Restorative Dentistry and Endodontics
• /
• 제29권3호
• /
• pp.249-266
• /
• 2004

The purpose of this study was to determine whether pH and time has any influence on the degradation behavior of composite restoration by analyzing the leached monomers of dental composites qualitatively and quantitatively after storage in acetate buffer solution as a function of time using high performance liquid chromatography (HPLC) / mass spectrometer. Materials and Methods：Three commercial composite restorative resin materials (Z-250, Heliomolar and Aeliteflo) with different matrix structure and filler composition were studied. Thirty specimens (7mm $diameter{\times}2mm$ thick) of each material were prepared. The cured materials were stored in acetate buffer solution at different pH (4, 7) for 1, 7 and 45days. As a reference, samples of unpolymerized composite materials of each product were treated with methanol (10mg/ml). Identification of the various compounds was achieved by comparison of their mass spectra with those of reference compound, with literature data. and by their fragmentation patterns. Data were analysed statistically using ANOVA and Duncan's test. Results：1. Amounts of leached TEGDMA in Aeliteflo were significantly larger than those of UDMA in Z-250 and Heliomolar at experimental conditions of different storage time and pH variation (p<0.001). 2. As to comparison of the amounts of leached monomers per sorage time, amounts of leached TEGDMA in Aeliteflo and UDMA in Z-250 and Heliomolar were increased in the pH 4 solution more significantly than in the pH 7 solution after 1day, 7days and 45days, respectively (p<0.001). 3. In total amounts of all the leached monomers with storage times, the overall amounts of pH 4 extracts were larger than those of pH 7 extracts for all resin groups, but there was no significant difference (p>0.05).

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제22권3호
• /
• pp.187-195
• /
• 2022

Background: This retrospective study investigated the incidence rate of accidental foreign body aspiration and ingestion according to patient sex, age, and dental department. This study aimed to verify whether the incidence rate is higher in geriatric than in younger patients and whether it is different among dental departments. Methods: Accidental foreign body aspiration and ingestion cases were collected from electronic health records and the safety report system of Yonsei University Dental Hospital from January 2011 to December 2017. The collected data included patients' age, sex, medical conditions, treatment procedures, and foreign objects that were accidentally aspirated or ingested. The incidence rate was calculated as the number of accidental foreign body aspirations and ingestions relative to the total number of patient visits. Differences depending on the patients' sex, age, and dental department were statistically identified. Results: There were 2 aspiration and 37 ingestion cases during the 7-year analysis period. The male to female incidence ratio was 2.8:1. The incidence rate increased with age and increased rapidly among those aged 80 years or older. Seven of the 37 patients with accidental foreign body ingestion had intellectual disability, Lou Gehrig's disease, dystonia, or oral and maxillofacial cancer. The incidence rate was highest in the Predoctoral Student Clinic and the Department of Prosthodontics. The most frequently swallowed objects were fixed dental prostheses and dental implant components. Conclusion: The incidence rate of accidental foreign body aspiration and ingestion differed according to patient sex, age, and dental department. Dental practitioners must identify high-risk patients and apply various methods to prevent accidental foreign body aspiration and ingestion in dental clinics. Inexperienced practitioners should be particularly careful.

• Journal of Microbiology and Biotechnology
• /
• 제32권11호
• /
• pp.1396-1405
• /
• 2022

Cholera remains a major global public health problem, for which oral cholera vaccines (OCVs) being a valuable strategy. Patients, who have recovered from cholera, develop antibody responses against LPS, cholera toxin (CT), toxin-coregulated pilus (TCP) major subunit A (TcpA) and other antigens; thus, these responses are potentially important contributors to immunity against Vibrio cholerae infection. However, assessments of the efficacy of current OCVs, especially inactivated OCVs, have focused primarily on O-antigen-specific antibody responses, suggesting that more sophisticated strategies are required for inactivated OCVs to induce immune responses against TCP, CT, and other antigens. Previously, we have shown that the toxT-139F allele enables V. cholerae strains to produce CT and TCP under simple laboratory culture conditions. Thus, we hypothesized that V. cholerae strains that express TCP via the toxT-139F allele induce TCP-specific antibody responses. As anticipated, V. cholerae strains that expressed TCP through the toxT-139F allele elicited antibody responses against TCP when the inactivated bacteria were delivered via a mouse model. We have further developed TCP-expressing V. cholerae strains that have been used in inactivated OCVs and shown that they effect an antibody response against TcpA in vivo, suggesting that V. cholerae strains with the toxT-139F allele are excellent candidates for cholera vaccines.

• 대한소아치과학회지
• /
• 제50권2호
• /
• pp.142-154
• /
• 2023

상악 견치는 기능과 외모에 있어서 중요한 역할을 하지만, 맹출 장애로 인해 문제를 일으키는 경우가 많다. 상악 견치의 매복은 비교적 흔하며 구조적 장애, 발달 이상, 공간 부족, 유전과 같은 다양한 요인에 의해 발생할 수 있다. 상악 견치의 구개측 매복은 서양인에게서 흔한 것으로 보고되지만 한국인에게는 순측 매복이 더 흔한 것으로 관찰된다. 순측으로 변위된 상악 견치의 경우, 치아 총생 및 골격성 부정교합이 보일 수 있으며, 측절치의 선천적 상실이나 과잉 측절치는 상악 견치의 구개측 매복 가능성을 높일 수 있다. 상악 견치 매복의 조기 발견 및 적절한 처치는 조화로운 치열 발달과 정상적인 치아 기능을 위해 중요하다. 본 종설을 통해 매복 상악 견치의 다양한 처치법을 제안하고 그 원리를 설명하고자 한다.