• 한국가스학회지
• /
• 제6권4호
• /
• pp.53-58
• /
• 2002

본 연구에서는 지금까지의 고정설비에 대한 정량적 위험성 평가에서 벗어나 위험물질 수송 시 고려되는 여러 가지 요소들을 확인하여 발생할 수 있는 잠재위험성을 확인하였다. 수송 시 발생할 수 있는 잠재위험성을 확인하였다. 또한 수송 시 발생할 수 있는 최악의 사고 시나리오와 대안적인 사고 시나리오를 통하여 피해 영향 범위에 대한 개인적 위험성 및 사회적 위험성을 평가하였으며 최적의 경로를 선정하였다. 이러한 평가를 기반으로 수송 시 중대사고의 피해 영향 범위에 대한 효율적인 위험성 감소 대책과 지역사회, 공공기관, 산업체들과의 연계를 통한 사고에 따른 피해를 최소화 할 수 있는 체계적인 비상대응 시스템을 구축할 수 있을 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.745-755
• /
• 2010

GTX(Great Train Express), the wide area express train of a big city center of metropolitan area, is the best new transportation method able to realize 'Low Carbon Green Growth' for solving traffic congestion of the metropolitan area with the connection the metropolitan area into 40-minute life zone by speeding up the standardized velocity, making the route straight and reducing the compensation of land using the space of 40~50m below the ground. In the transportation sector all over the world, if it turned into the public transportation system focusing on the train at a point of time that low carbon green revolution takes the initiative, national competitiveness would be enhanced by reducing the emission of carbon from cars by 1/6. Accordingly, this study is to look into the efficient operation in accordance with GTX construction superintended by currently Gyeonggi province and to consider the optimum operation plan of GTX that are proper for the actual circumstances of the country by comparatively analyzing overseas cases that took their positions as new transportation by curtailment of transit time through highspeed such as London area, Paris area, and Tokyo area etc that are similar to Korean metropolitan area.

• 대한교통학회지
• /
• 제20권5호
• /
• pp.193-206
• /
• 2002

신호교차로로 구성된 네트워크의 시스템최적 신호시간산정을 위해 Cell Transmission 이론을 교통류 모형으로 활용한 신호최적화 모형을 제안한다. Cell Transmission 모형은 기존에 소개된 신호최적화 모형과는 달리 충격파, 대기행렬의 길이, 그리고 하류부 교차로 대기행렬의 역류(Spillback)과 같은 과포화 현상을 표현하는데 적절한 이론적이고 실제적인 배경을 지원한다. 모형에서 기점을 출발한 수요차량은 종점에 도착할 때까지 경로선택을 통해서, 그리고 신호시스템은 이러한 수요의 움직임 고려하여 신호시간요소의 최적화를 통한 네트워크의 비용을 최소화하기 위해 서로 협력한다는 의미에서 제안된 모형은 시스템 최적화를 의미한다. 모형은 혼합정수계획법으로 정식화되며 최적신호전략과 고정신호전략간의 실험계획을 통해 구축된 모형을 비교·평가한다.

• 한국주조공학회지
• /
• 제25권5호
• /
• pp.203-208
• /
• 2005

The main emphasis of this study is to optimize the process variables for manufacturing aluminum foam materials by direct foaming of remelted aluminum scraps. Aluminum foams were fabricated from two different raw materials, pure aluminum and used beverage cans. For both cases, $TiH_{2}$ was used as a foaming agent. Calcium was added as a thickener for the foaming of pure aluminum and no thickener was added for that of used beverage Cans because the pre-existing oxides of the used beverage cans are used as a thickener. Calcium and $TiH_{2}$ content varies from 0.5wt.% to 2.0wt.% and from 0.5wt.% to 1.5wt.%, respectively. The processing conditions, such as the effect of calcium on the melt viscosity, foaming temperature, and the optimum amount of the foaming agent with regard to the melt viscosity were discussed.

• 한국분말재료학회지
• /
• 제8권3호
• /
• pp.157-162
• /
• 2001

An optimum route to fabricate the ferrous alloy dispersed $Al_2O_3$ nanocomposites such as $Al_2O_3$/Fe-Ni and $Al_2O_3$/Fe-Co with sound microstructure and desired properties was investigated. The composites were fabricated by the sintering of powder mixtures of $Al_2O_3$ and nano-sized ferrous alloy, in which the alloy was prepared by solution-chemistry routes using metal nitrates powders and a subsequent hydorgen reduction process. Microstructural observation of reduced powder mixture revealed that the Fe-Ni or Fe-Co alloy particles of about 20 nm in size homogeneously surrounded $Al_2O_3$, forming nanocomposite powder. The sintered $Al_2O_3$/Fe-Ni composite showed the formation of Fe$Al_2O_4$ phase, while the reaction phases were not observed in $Al_2O_3$/Fe-Co composite. Hot-pressed $Al_2O_3$/Fe-Ni composite showed improved mechanical properties and magnetic response. The properties are discussed in terms of microstructural characteristics such as the distribution and size of alloy particles.

• 한국표면공학회지
• /
• 제46권2호
• /
• pp.75-79
• /
• 2013

A one-step route was developed to fabricate $Cu(In,Ga)Se_2$ (CIGS) thin films by radio frequency (RF) magnetron sputtering from a single quaternary $CuIn_{0.75}Ga_{0.25}Se_2$ target. The effects of the substrate temperatures on the structural and electrical properties of the CIGS layers were investigated by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS) and Hall effect measurements. All the deposited films showed a preferential orientation along the (112) direction. The films deposited at $300^{\circ}C$ and $400^{\circ}C$ revealed that chalcopyrite main (112) peak and weak prominent peaks of (220)/(204) and (312)/(116), indicating polycrystalline structures. The element ratio of the deposited film at $300^{\circ}C$ were almost the same as the near-optimum value. The carrier concentration of the films decreased with increasing substrate temperatures.

• ETRI Journal
• /
• 제40권5호
• /
• pp.613-623
• /
• 2018

The instability of operational channels on cognitive radio networks (CRNs), which is due to the stochastic behavior of primary users (PUs), has increased the complexity of the design of the optimal routing criterion (ORC) in CRNs. The exploitation of available opportunities in CRNs, such as the channel diversity, as well as alternative routes provided by the intermediate nodes belonging to routes (internal backup routes) in the route-cost (or weight) determination, complicate the ORC design. In this paper, to cover the channel diversity, the CRN is modeled as a multigraph in which the weight of each edge is determined according to the behavior of PU senders and the protection of PU receivers. Then, an ORC for CRNs, which is referred to as the stability probability of communication between the source node and the destination node (SPC_SD), is proposed. SPC_SD, which is based on the obtained model, internal backup routes, and probability theory, calculates the precise probability of communication stability between the source and destination. The performance evaluation is conducted using simulations, and the results show that the end-to-end performance improved significantly.

• 한국분말재료학회지
• /
• 제12권2호
• /
• pp.146-150
• /
• 2005

An optimum route to synthesize $Al_2O_3$-based composite powders with homogeneous dispersion of carbon nanotubes (CNTs) was investigated. CNTs/Metal/$Al_2O_3$ nanocomposite powders were fabricated by thermal chemical vapor deposition of $C_2H_2$ gas over metal/$Al_2O_3$ nanocomposite catalyst prepared by selective reduction of metal oxide/$Al_2O_3$ powders. The FT-Raman spectroscopy analysis revealed that the CNTs have single- and multi-walled structure. The CNTs with the diameter of 25-43 nm were homogeneously distributed in the metal/$Al_2O_3$ powders, and their characteristics were strongly affected by a kind of metal catalyst and catalyst size. The experimental results show that the composite powder with required size and dispersion of CNTs can be realized by control of synthesis condition.

• 한국농공학회논문집
• /
• 제46권1호
• /
• pp.121-131
• /
• 2004

Transportation and logistics of agricultural products have been one of the major interests of many researches. Most of researches have been limited to presuming these as a first dimensional process or considering only economic value of agricultural products at each stage of logistics. However, the particular characteristics of agricultural products, such as quality change during transportation or extensively scattered origins, require examining these problems as a whole system. Network model has been adopted to represent nodes, which stand for spatial location of demand and supply of agricultural products, and communication between these nodes. Based on network theory and advanced marketing potential function, an optimal routes selection model is developed. The model employed network simplex method for routes optimization. The application of the model focused on transportation network organization to reflect different market prices for different locations and resulted in optimum routes and profit improvement of the applied agricultural product.

• 대한교통학회지
• /
• 제10권3호
• /
• pp.7-20
• /
• 1992

The common cycle time for the linded signals is usually determined for the critical intersecion, just because the cpacity of a signalized intersection depends on the cycle time. This may not be optimal since the interactions between the flow and the spatial structure of the route or the area are disregarded in this case. It is common to separate the total delay incurred at signals into two parts, a deterministic or uniform delay and a stochastic or random delay. The deterministic delays and the stochastic delays on the artery particularly related to signal cycle time. For this purpose a microscopic simulation technique is used to evaluate deterministic delays, and a macroscopic simulation technique based on the principles of Markov chains is used to evaluate stochastic delays with over flow queue. As a result of investigating the relations between deterministic delays and cycle time in the various circumstances of spacing of signals and traffic volume. As for stochastic delays the resalts of comparisons of the macroscopic simulation and Newell's approximation with the microscopic simulation indicate that the former is valid for the degree of saturation less than 0.95 and the latter is for that above 0.95. Newell's argument that the total stochastic delay on an arterial is dominated by that at or caused by critical intersection is certified by the simulation experiments. The comprehensive analyses of the values of optimal cycle time with various conditions lead to a model. The cycle time determined by this model shows to be approximately 70% of that calculated by Webster's.