• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.3
• /
• pp.434-442
• /
• 2008

The objective of this study was to determine the optimum ratio of methionine to methionine plus cystine for growing pigs. A nitrogen balance trial was conducted using a total of 21 barrows (Large WhiteLandrace) over two replicates. The initial body weight was $20.36{\pm}1.22kg$ (mean${\pm}$SD) in the first replicate and $23.54{\pm}1.02kg$ (mean${\pm}$SD) in the second. For each replicate, the 21 pigs were randomly assigned to one of seven dietary treatments with three observations per treatment. The diets included a methionine and cystine-deficient basal diet with all other essential nutrients meeting nutrient requirements and six diets formulated with graded levels of DL-methionine (0.00, 0.03, 0.06, 0.10, 0.13, 0.16%) and $L-Cystine{\cdot}HCl{\cdot}H_2O$ (0.19, 0.15, 0.11, 0.07, 0.04, 0.00%). This resulted in ratios of methionine to methionine plus cystine of 41.3, 29.6, 35.3, 41.2, 46.0, 51.6 and 57.5%. Each experimental period lasted 12 days consisting of a seven-day adaptation period followed by a five-day total collection of urine and feces. During the collection period, pigs were fed 900 g/day for the first replicate and 1,200 g/day for the second replicate. The feed was provided in three equal portions at 0800, 1500, and 2200 h daily. Pigs had ad libitum access to water after feeding. There was a linear (p<0.01) and quadratic (p<0.01) effect on daily gain and feed conversion as the ratio of methionine to methionine plus cystine increased. Pigs receiving the diets providing a methionine to methionine plus cystine ratio of 51.6% had the best daily gain and feed conversion. Plasma urea nitrogen was also lowest for this treatment. Nitrogen retention increased (p<0.01) as the relative proportion of methionine increased up to 51.6% and then a downward trend occurred at 57.5%. The quadratic regression model, as well as one- and two- slope regression line models, were used to determine the optimum ratio of methionine to methionine plus cystine. Eliminating the 35.3% methionine to methionine plus cystine treatment resulted in $R^2$ values in excess of 0.92. The optimal ratio of methionine to methionine plus cystine was estimated to be 54.15% for nitrogen retention and 56.72% for plasma urea nitrogen.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.8
• /
• pp.1172-1180
• /
• 2013

Two experiments were conducted to determine the standardized ileal digestible (SID) lysine (Lys) requirement and the ideal SID threonine (Thr) to Lys ratio for finishing barrows. In Exp. 1, 120 barrows with an average body weight of $72.8{\pm}3.6$ kg were allotted to one of six dietary treatments in a randomized complete block design conducted for 35 d. Each diet was fed to five pens of pigs containing four barrows. A normal crude protein (CP) diet providing 15.3% CP and 0.71% SID Lys and five low CP diets providing 12% CP with SID Lys concentrations of 0.51, 0.61, 0.71, 0.81 and 0.91% were formulated. Increasing the SID Lys content of the diet resulted in an increase in weight gain (linear effect p = 0.04 and quadratic effect p = 0.08) and an improvement in feed conversion ratio (FCR) (linear effect p = 0.02 and quadratic effect p = 0.02). For weight gain and FCR, the estimated SID Lys requirement of finishing barrows were 0.71 and 0.71% (linear broken-line analysis), 0.79 and 0.78% (quadratic analysis), respectively. Exp. 2 was a 26 d dose-response study using SID Thr to Lys ratios of 0.56, 0.61, 0.67, 0.72 and 0.77. A total of 138 barrows weighing $72.5{\pm}4.4$ kg were randomly allotted to receive one of the five diets. All diets were formulated to contain 0.61% SID Lys (10.5% CP), which is slightly lower than the pig's requirement. Weight gain was quadratically (p = 0.03) affected by SID Thr to Lys ratio while FCR was linearly improved (p = 0.02). The SID Thr to Lys ratios for maximal weight gain and minimal FCR and serum urea nitrogen (SUN) were 0.67, 0.71 and 0.64 using a linear broken-line model and 0.68, 0.78 and 0.70 using a quadratic model, respectively. Based on the estimates obtained from the broken-line and quadratic analysis, we concluded that the dietary SID Lys requirement for both maximum weight gain and minimum FCR was 0.75%, and an optimum SID Thr to Lys ratio was 0.68 to maximize weight gain, 0.75 to optimize FCR and 0.67 to minimize SUN for finishing barrows.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.4 no.3
• /
• pp.226-234
• /
• 1984

In order ti find out the optimum seeding time(OST) and optimum seed rate(OSR) of Italian ryegrass on seed production, this studies with tetraploid cv. Tetrone were carried out on the experimental field of Livestock Experiment Station. Treatments included seed rates of 1, 2, 3 and 4 kg per 10a and combined with seeding time on 20, 30 Aug, 9, 19 and 29, September 1983. Seeds were sown in rows 50 cm apart and were spaced in a continuous line with width of 15 cm within the rows. The results are summarized as follows: 1. Autumn tillers could be classified into three groups from winter-killing point of view, namely winter-killing completely, damaged growing point only and living tillers. 2. The young inflorescence-bearing stem in Italian ryegrass which were sown earlier than 9. September were more susceptible to winter killing. Tiller buds in those stems which originated from an axillary buds at the stem base within senescent leaf-sheaths emerged lately in spring, and consequently heading was delayed, culm length shortened and seed yield reduced. 3. Tiller buds which originated from damaged growing point only and living tillers in moderate shoots emerged early in spring and those tillers became mainly spike-bearing culm. 4. The emergence-time of tillers influenced on culm-, spike- length and ripenness more than seeding time and seed rate. 5. Seed yield was mostly affected by the number of spikes per unit area. 6. For the safety of over-wintering and enough spikes on seed production, OST and OSR at Suweon were the last part of September and 2-3 kg per 10a, respectively. Especially OSR was 2 kg per 10a for early and 3 kg per 10a for late OST.

• KSBB Journal
• /
• v.11 no.2
• /
• pp.254-261
• /
• 1996

Attenuated varicella-zoster virus (VZV) was propagated in human lung fibroblast (HLF) cells Among media tested in this work, DMEM was the best medium for the growth of HLF cells. Because HLF was a normal finite cell line, cell growth late was dependent on the age of HLF cells. When the population doubling level (PDL) was higher than 46, apoptosis of HLF cells started and cell growth rate decreased. The optimum temperature for the cell growth and virus propagation in the T-flask culture was $37^{\circ}C$. In a microcarrier culture system in which Cytodex-3 was used for the VZV propagation in spinner vessels, the yield of plaque forming cells was lower than that in the T-flask culture. The relatively high shear environment near microcarriers was thought to cause the low yield of VZV in the microcarrier culture system.

• Tribology and Lubricants
• /
• v.30 no.3
• /
• pp.139-145
• /
• 2014

Nowadays, most micro-patterns are manufactured during flow line production. However, a conventional rotary chemical mechanical polishing (CMP) system has a limited throughput for the fabrication of large and flexible electronics. To overcome this problem, we propose a novel linear roll-CMP system for the planarization of large-area electronics. In this paper, we present a statistical analysis on the linear roll-CMP process of copper-clad laminate (CCL) to determine the impacts of process parameters on the material removal rate (MRR) and its non-uniformity (NU). In the linear roll-CMP process, process parameters such as the slurry flow rate, roll speed, table feed rate, and down force affect the MRR and NU. To determine the polishing characteristics of roll-CMP, we use Taguchi's orthogonal array L16 (44) for the experimental design and F-values obtained by the analysis of variance (ANOVA). We investigate the signal-to-noise (S/N) ratio to identify the prominent control parameters. The "higher is better" for the MRR and "lower is better" for the NU were selected for obtaining optimum CMP performance characteristics. The experimental and statistical results indicate that the down force and roll speed mainly affect the MRR and the down force and table feed rate determine the NU in the linear roll-CMP process. However, over 186.3 N of down force deteriorates the NU because of the bending of substrate. Roll speed has little relationship to the NU and the table feed rate does not impact on the MRR. This study provides information on the design parameter of roll-CMP machine and process optimization.

• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.4
• /
• pp.551-558
• /
• 2015

This study was carried out to evaluate the dietary threonine requirement by measuring the plasma free threonine and ammonia concentrations in rainbow trout, Oncorhynchus mykiss after dorsal aorta cannulation. A total of 70 fish (average initial weight $506{\pm}8.2g$) were randomly distributed into each of the 14 net cages (5 fish/cage). After 48 hours (h) of feed deprivation, each group was intubated at 1% body weight with one of the seven L-amino acid based diets containing graded levels of threonine (0.42%, 0.72%, 0.92%, 1.12%, 1.32%, 1.52%, or 1.82% of diet, dry matter basis). Blood samples were taken at 0, 5, and 24 h after intubation. Post-prandial plasma free threonine concentrations (PPthr) of fish 5 h after intubation with diets containing 1.32% or more threonine were significantly higher than those of fish intubated with diets containing 1.12% or less threonine (p<0.05). Post-absorptive free threonine concentrations (PAthr) after 24 h of intubation of the fish with diets containing 0.92% or more threonine were significantly higher than those of fish intubated with diets containing 0.72% or less threonine. Post-prandial plasma ammonia concentrations (PPA, 5 h after intubation) were not significantly different among fish intubated with diets containing 1.12% or less threonine, except the PPA of fish intubated with diet containing 0.42% threonine. Broken-line model analyses of PPthr, PAthr, and PPA indicated that the dietary threonine requirement of rainbow trout should be between 0.95% (2.71) and 1.07% (3.06) of diet (% of dietary protein on a dry matter basis).

• Archives of Pharmacal Research
• /
• v.28 no.8
• /
• pp.923-929
• /
• 2005

Methanol extracts of domestic plants of Korea were evaluated as a potential inhibitor of neutral pH optimum and membrane-associated 60 kDa sphingomyelinase (N-SMase) activity. In this study, we partially purified N-SMase from bovine brain membranes using ammonium sulfate. It was purified approximately 163-fold by the sequential use of DE52, Butyl-Toyopearl, DEAE-Cellulose, and Phenyl-5PW column chromatographies. The purified N-SMase activity was assayed in the presence of the plant extracts of three hundreds species. Based on the in vitro assay, three plant extracts significantly inhibited the N-SMase activity in a time- and concentration-dependent manner. To further examine the inhibitory pattern, a Dixon plot was constructed for each of the plant extracts. The extracts of Abies nephrolepis, Acer tegmentosum, and Ginkgo biloba revealed a competitive inhibition with the inhibition constant (Ki) of $11.9 {\mu}g/mL,\;9.4{\mu}g/mL,\;and\;12.9{\mu}g/mL$, respectively. These extracts also inhibited in a dose-dependent manner the production of ceramide induced by serum deprivation in human neuroblastoma cell line SH-SY5Y.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.12
• /
• pp.609-619
• /
• 2015

A preprocessing scheme utilizing multi-division of the ROI (region of interest) in a chemiluminescence image during inversion is proposed. The resulting inverted image shows the flame's structure, which can be useful for studying combustion instability. The flame structure is often quantitatively visualized with PLIF (planar laser-induced fluorescence) images as well. The chemiluminescence image, which is a line-integral of the flame, needs to be preprocessed before inversion, mainly due to the inherent noise and the assumption of axisymmetry during the inversion. The feasibility of the multi-division preprocessing technique has been tested with experimentally-obtained OH PLIF and $OH^*$ chemiluminescence images of jet and swirl-stabilized flames burning substitute natural gas (SNG). It turns out that the technique outperforms two conventional methods, specifically, the technique without preprocessing and the one with uni-division, reconstructing the SNG flame structures much better than its two counterparts when compared using corresponding OH PLIF images. The characteristics of the optimum degree of polynomials to be applied for curve-fitting of the flame region data for the multi-division method involving two flames has also been investigated.

• Industrial Engineering and Management Systems
• /
• v.4 no.1
• /
• pp.54-67
• /
• 2005

This paper provides an evaluation of an optimization-based, multiple-input double-output (MIDO) run-to-run (R2R) control scheme for general semiconductor manufacturing processes. The controller in this research, termed adaptive dual response optimizing controller (ADROC), can serve as a process optimizer as well as a recipe regulator between consecutive runs of wafer fabrication. In evaluation, it is assumed that the equipment model could be appropriately described by a pair of second-order polynomial functions in terms of a set of controllable variables. Of practical relevance is to consider a drifting effect in the equipment model since in common semiconductor practice the process tends to drift due to machine aging and tool wearing. We select a typical application of R2R control to chemical mechanical planarization (CMP) in semiconductor manufacturing in this evaluation, and there are five different CMP process scenarios demonstrated, including mean shift, variance increase, and IMA disturbances. For the controller, ADROC, an on-line estimation technique is implemented in a self-tuning (ST) control manner for the adaptation purpose. Subsequently, an ad hoc global optimization algorithm based on the dual response approach, arising from the response surface methodology (RSM) literature, is used to seek the optimum recipe within the acceptability region for the execution of next run. The main components of ADROC are described and its control performance is assessed. It reveals from the evaluation that ADROC can provide excellent control actions for the MIDO R2R situations even though the process exhibits complicated, nonlinear interaction effects between control variables, and the drifting disturbances.

• Journal of Radiation Industry
• /
• v.8 no.3
• /
• pp.141-146
• /
• 2014

Nickel (Ni) electroplating was implemented by using a metal Ni powder in order to establish a $^{63}Ni$ plating condition on the PN junction semiconductor needed for production of beta-voltaic battery. PN junction semiconductors with a Ni seed layer of 500 and $1000{\AA}$ were coated with Ni at current density from 10 to $50mA\;cm^{-2}$. The surface roughness and average grain size of Ni deposits were investigated by XRD and SEM techniques. The roughness of Ni deposit was increased as the current density was increased, and decreased as the thickness of Ni seed layer was increased. The results showed that the optimum surface shape was obtained at a current density of $10mA\;cm^{-2}$ in seed layer with thickness of $500{\AA}$, $20mA\;cm^{-2}$ of $1000{\AA}$. Also, pure Ni deposit was well coated on a PN junction semiconductor without any oxide forms. Using the line width of (111) in XRD peak, the average grain size of the Ni thick firm was measured. The results showed that the average grain size was increased as the thickness of seed layer was increased.