• 전자공학회논문지D
• /
• 제35D권9호
• /
• pp.13-19
• /
• 1998

T-모양의 마이크로스트립 급전 구조를 갖는 슬롯 안테나는 정합을 쉽게 이룰 수 있고 대역 폭이 기존의 급전 구조의 슬롯 안테나에 비하여 넓었다. 본 논문에서는 대역 폭을 더 넓일 수 있는 급전 구조에 대하여 서술하였다. 즉 T-모양 급전 구조에 병열 개방 스터브를 부착한 새로운 방법을 제시하였다. FDTD 법으로 모델링하여 전계분포를 시간 영역에서 계산하였고, 이를 Fourier 변환시켜 슬롯 안테나의 전압 정재파비, 입력 임피던스, 복사 패턴을 주파수 영역에서 계산하였다. 스터브의 위치(L₁)와 길이(L₂)에 따라 대역 폭이 변화하였으며, L₁=30 mm, L₂=33mm일 때 중심 주파수 2.3 GHz에서 최대 대역폭을 얻었다. 이러한 결과로부터 최적의 안테나를 설계 제작하였고, % 대역 폭은 53.9 %의 광대역 특성을 얻었으며, 이들 결과들은 계산값과 비교적 잘 일치하였다.

• 한국항해항만학회지
• /
• 제40권5호
• /
• pp.241-247
• /
• 2016

The tracking filter plays a key role in the accurate estimation and prediction of maneuvering a vessel's position and velocity when attempting to enhance safety by avoiding collision. Therefore, in order to achieve accurate estimation and prediction, many oceangoing vessels are equipped with the Automatic Radar Plotting Aid (ARPA) system. However, the accuracy of prediction depends on the tracking filter's ability to reduce noise and maintain a stable transient response. The purpose of this paper is to derive the optimal values of the gain parameters used in tracking a High Dynamic Warship. The algorithm employs a ${\alpha}-{\beta}-{\gamma}$ filter to provide accurate estimates and updates of the state variables, that is, positions, velocity and acceleration of the high dynamic warship based on previously observed values. In this study, the filtering coefficients ${\alpha}$, ${\beta}$ and ${\gamma}$ are determined from set values of the damping parameter, ${\xi}$. Optimization of the damping parameter, ${\xi}$, is achieved experimentally by plotting the residual error against different values of the damping parameter to determine the least value of the damping parameter that results in the optimum smoothing coefficients leading to a reduction in the noise corruption effect. Further investigation of the performance of the filter indicates that optimal smoothing coefficients depend on the initial and average velocity of the target.

• Korean Chemical Engineering Research
• /
• 제52권6호
• /
• pp.713-719
• /
• 2014

4성분계 다중반응이 반응증류 탑 내에서 발생할 때 증류거동의 변화를 시각화 방법을 통해 분석하였다. 시각화 방법이란 단순 증류의 물질수지에 각 반응에 의한 벡터를 추가하고 이를 공간상에 표현하는 것으로 각 단에서 혼합물의 조성 변화 및 반응의 진척도를 직관적으로 알 수 있다. 또한 이를 통해 주어진 운전조건에서 필요한 총 단수 및 최적반응 단의 위치를 결정할 수 있다. 본 연구에서는 에틸렌글리콜(Ethylene glycol) 생산공정을 시각화 방법을 통해 분석하였다. 제안된 시각화 방법을 사용하여 복잡한 실험이나 공정모사 없이 4성분계 다중반응증류 공정에 대한 타당성 평가 및 분석이 가능하다.

• 한국정보과학회논문지:시스템및이론
• /
• 제27권7호
• /
• pp.684-694
• /
• 2000

저 전력회로의 설계를 위해서, 전체 회로의 면적을 줄임으로써 용량성 부하(capacitance)값을 줄이는 방법으로 적절한 트랜지스터를 선택하여 사이징하는 방법을 이용할 수 있는데, 이 때 트랜지스터 사이징을 수행하면서 적당한 위치에 버퍼를 삽입하여주면 더 좋은 결과를 가져올 수 있다. 본 논문은 TILOS 알고리즘을 이용하여 트랜지스터 사이징(sizing)을 수행하는 동시에 버퍼의 삽입을 수행하는 알고리즘 두 가지를 소개하고 이 두 방법을 비교한다. 그 첫 번째 방법은 Template Window를 이용하여 직접 시뮬레이션하는 방법이고 다른 하나는 보외법(Extrapolation)을 이용하는 방법이다. 이와 같이 버퍼를 삽입하면서 트랜지스터 사이징을 수행한 결과, 버퍼를 삽입하지 않을 때 보다 10-20%의 면적감소를 얻었을 수 있었으며 보외법을 이용한 방법 보다 Template Window를 이용했을 때 더 좋은 결과를 얻을 수 있었다.

• 생물환경조절학회지
• /
• 제8권2호
• /
• pp.83-89
• /
• 1999

여름철 고온기에 반결구상추를 식물공장에서 재배할 때 자주 발생하는 잎끝마름증 현상을 경감시키고, 생산성을 향상시키기 위해 품종, 육묘배지, 베드 기울기, 베드위치, 급액량과 같은 최적의 재배조건을 구명하기 위하여 실험을 수행하였다. Rex와 Flandria 품종은 다른 품종에 비해 비록 생육은 약간 저조했으나 상품성이 높고, 잎끝마름증 발생율이 적어 여름철 고온기에 적합한 품종인 것으로 나타났다. 육묘배지는 물리, 화학적 특성이 우수한 코코피트에서 상추의 생육량이 높았으며, 근권부에 배양액의 흐름을 원활하게 해 줄 수 있는 베드의 기울기는 l~2%가 적당하였다. 급액량은 반결구상추 생육에서 베드당 2$\ell$가 적합하였다 베드설치 높이에 따른 반결구상추 생육은 베드의 높이가 낮을 때가 높을 때보다 좋았다. 이것은 베드높이를 낮게 설치함으로써 작물주변의 온도와 습도분포가 결구상추의 생육에 적합하였기 때문인 것으로 생각되었다.

• The Journal of Advanced Prosthodontics
• /
• 제2권3호
• /
• pp.102-105
• /
• 2010

PURPOSE. The aims of this study were to suggest a method of fabrication of the record base using a light-polymerized resin by applying the two-phase fabrication method for the improvement of the fit of the record base and to compare the degree of fit according to the separation site. MATERIALS AND METHODS. In the edentulous cast of maxilla, four test groups were considered. In the first, second, third, and fourth test groups (n = 12 in each group) the separation was done at 0, 5, 10, and 15 mm, respectively below the alveolar crest along the palatal plane. For the control group, the record base was made without separating the two sections. The light-body silicone material was injected into the fitting surface of the record base. It was then placed onto the cast and finger pressure was applied to stabilize it in a seated position followed by immediate placement onto the universal test device. Finally, the mass of the impression material was measured after it was removed. ANOVA was performed using the SAS program. For the post-hoc test, the Wilcoxon Rank-Sum test and the Tukey-Kramer HSD test were performed ($\alpha$ = 0.05). RESULTS. The control group and Group 3, 4 showed significant differences. The Group 3 and 4 showed significantly smaller inside gaps than the control group which was not made with the two-phase fabrication method. CONCLUSION. The two-stage polymerized technique can improve the fit of the denture base particularly when the separation was made at 10 to 15 mm from the alveolar crest.

• 한국전자파학회논문지
• /
• 제11권7호
• /
• pp.1194-1203
• /
• 2000

1 mG부터 5 G까지 발생시킬 수 있는 소동물 실험율 60Hz 자계 발생장치를 설계하고 제작하였다. 동시에 많은 동물을 시험하기 위해서는 발생장치 내의 균일한 자계 분포 영역이 넓어야 하는데, 본 고에서는 SD-계쥐 약 50마리를 수용할수 있도록 하기 위해 소동물의 거주 공간을 장치 내부 1$\times$1$\times$1m3 크기로 하고 전체 발생장치의 크기는 1.8$\times$1.8$\times$1.8m3 입방형으로 설정하였다. 장치 내부의 자계 균일도를 검증하기 위해서 3차원 자계 계산 프로그램을 개발하였고, 이를 이용하여 거주 공간의 자계 분포가 가장 균일하게 되는 내.외곽코일의 최적 전류비 및 위치를 결정하였다. 또한 수치계산을 통한 임피던스에 근거하여 전원장치를 제작하였다. 제작된 자계 발생장치는 측정을 통하여 동물 거주 공간의 자계 최대치와 최소치의 차이가 3% 이내임을 확인할수 있었고 정밀한 소동물 자계 노출 시험용으로 사용 가능한 것으로 판단되었다.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제44차 학술발표회
• /
• pp.36-36
• /
• 2011

We synthesized new dye sensor based on indole compound. Through the UV-vis absorptions, we analyzed chemosensing properties to explain metal binding properties. The peak absorptions increased at 472 nm when added metal cations($Cd^{2+}$, $Cu^{2+}$, $Hg^{2+}$, $Fe^{2+}$, $Zn^{2+}$, $Ni^{2+}$ and $Cr^{3+}$) and gradually decreased the peak at 516 nm. Thus, this UV-Vis absorption behavior clearly showed the metal binding reaction. To measure energy level of used dye sensor, HOMO/LUMO energy value was calculated with cyclovaltagramm(CV) and using computational calculation method, in which we estimated the optimum structure of dye sensor. CV and computational calculation method, both compared to find suitable geometric structure. (with almost same energy values.) From the computational calculation, dye sensor has plane structure. So, Amine and ketone in the dye sensor faced each other and makes position to bind metal cations. In addition, these positions was supported pull-push electron system and generated MLCT process, when the dye sensor was bonded with the metal cations and resulted chemosensing properties. Through the electrochemical and computational calculation method analyze, we proposed the chemosensing principles that the dye sensor bind the metal cation between ketone and amine. Finally, the formation type of metal ion bindings was determined by Job's plot measurements.

• Journal of Biosystems Engineering
• /
• 제35권1호
• /
• pp.21-30
• /
• 2010

This study was performed to develop an active tire pressure control system that can adjust tire pressure to the optimum level according to traveling and working condition of agricultural tractor. For the development of active tire pressure control system, pneumatic supplier, solenoid valve block including pneumatic supply line, infinite rotation type pneumatic supplier with rotary joint unit, tire pressure transceiver module and control algorithm were developed. Also, tire simulator was developed. Using this tire simulator, the feasibility of each part constructing actual system was tested by checking the performance. The average communication success ratio was 98.3% between tire pressure transmitter and receiver module according to the various tire rotational speed and data receipt position of receiver module. The communication performance of the developed transmitter and receiver module was very stable in any condition. The tire pressure control system was accomplished by using the proportional control algorithm in this study. Also tire pressure control performance of developed control system was analyzed by using the tire simulator. As a result of control performance analysis to the developed system, the developed control system took 307 seconds to inflate agricultural tractor's tire from 50 kPa to 180 kPa. In opposite case, it took 210 seconds. Also it was able to control the tire pressure accurately under ${\pm}0.9%$ (FS) in any condition.

• Journal of Biosystems Engineering
• /
• 제5권2호
• /
• pp.26-39
• /
• 1980

A study was investigated to find out the mechanical optimum conditions of power tiller-plow system on both paddy field and upland. Mathematical model was developed for the theoretical analysis of this system and the experimentation on the field was carried out with two different sizes of 5PS and 8PS power tiller equipped with rubber tire. 1) The relationship between the plowing depth and draft resistance of the power tiller-plow system was a quadratic function. 2) The minimum point of the specific draft resistance of the 5 PS plow was found at the smaller plowing depth than that of 8 PS plow, therefore we can find that the curved surface of 5PS plow bottom should be improved for the effective plowing operation. 3) As the improvement of the mechanical balance by the desirable change of the curved surface of plow bottom, the relative position of hitch point and dimension of plow beam would be realized, the 5 PS power tiller could be used to plow deeply (about 16-17cm). 4) The virtual acting point of the total draft resistance on the plow bottom approached to the land side as the plowing depth increased. 5) The resultant of vertical reaction force $R_2$ on the landside was increased with the plowing depth, while the vertical reaction force $R_1$ on the wheel was decreased as the slope angle of the body of power tiller increased. 6) For the effective plowing operations ; a) The slope angle of the body should be as small as possible. b) The diameter of the wheel should be as small possible. c) The horizontal and vertical distances $l_2, h_1$ between the wheel axis and plow bottom should be as large as possible. 7) To use the 5PS power tiller as the major unit of agricultural machinery, the curved surface of the 5 PS plower bottom and the mechanism of attachment between the power tiller and the plow should be changed as the indications of this study, and in addition to these, the new operation method of the field work should be developed.