• 한국항해학회지
• /
• 제25권1호
• /
• pp.45-52
• /
• 2001

본 논문은 선체구조에 많이 이용되고 있는 보강판 구조물의 동적 특성을 최적 변경하는데 그 목적이 있다. 유한요소법(FEM), 동적 감도해석법, 최적구조 변경법을 이용하여 보강판의 동적 특성을 최적화한다. 먼저, FEM을 이용하여 보강판 구조물의 동적 특성을 해석한다. 다음으로 설계변수의 변화에 따른 동적 특성의 변화율을 동적 감도해석법으로 해석한다. 감도해석법으로 구한 감도값과 최적구조 변경법을 이용하여 설계변수들의 변경 량을 계산한다. 보강판 구조물의 고유진동수의 변경을 목적함수로 하고, 보강판의 두께와 보강재의 단면2차 모우멘트를 설계 변수로 한다. 본 논문에서 이용한 최적구조 변경법이 보강판 구조물의 동특성을 최적화하는데 유용함을 보여준다.

• 전자공학회논문지CI
• /
• 제49권4호
• /
• pp.54-61
• /
• 2012

본 논문에서는 기 개발된 등급기준 돌연변이 확률조절방법에 여왕벌진화방법을 융합하여 유전자알고리즘의 성능을 향상시키는 방법을 제안한다. 등급기준 돌연변이 확률조절 방법은 유전자알고리즘의 개체가 지역 최적해에 빠지는 것을 방지하고 지역 최적해에 빠졌을 경우 쉽게 빠져나올 수 있게 하는 방법으로 기존 알고리즘에 비하여 일정부분 성능향상을 보였다. 그러나 이 방법은 지역최적해가 많건 적건 간에 전역 최적해가 한 곳에 작은 영역에 있는 문제에서는 그다지 성능이 좋지 않았다. 우리는 그 이유가 이 방법이 전역 최적해로의 수렴성이 부족한 것으로 판단하고 수렴성을 강화시키기 위하여 여왕벌 진화방법을 융합한 알고리즘을 본 논문에서 제안한다. 여왕벌진화방법은 여왕벌의 생식을 모사한 방법으로 수렴성을 강화시킬 수 있는 방법이다. 제안한 방법의 성능을 측정하기위하여 4개의 함수최적화문제에 적용해본 결과 우리가 예상한대로 전역 최적해가 한 곳에 작은 영역에 몰려있는 문제에서는 상당한 성능향상이 일어나는 것을 관찰할 수 있었다. 그러나 전역 최적해가 넓은 영역에 걸쳐있는 문제에서는 성능향상이 거의 없었으며 전역 최적해가 여러 곳에 멀리 떨어져 있는 문제에서는 강한 수렴성으로 인하여 오히려 성능이 나빠지는 것을 볼 수 있었다. 이러한 실험결과로 보았을 때 본 논문에서 제안한 방법은 전역 최적해가 한 곳에 몰려있는 문제에서 매우 유용하게 사용될 수 있을 것으로 판단된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.605-606
• /
• 2010

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.477-483
• /
• 2001

Optimum directivity synthesis of ultrasonic transducers in linear array is considered. To realize the desired directivity, a robust and efficient method is proposed which is the direct inversion combined with the iterative DFP (Davidon-Fletcher-Powell) method. A quasi-ideal beam with the beam width and the steering beam angle specified are chosen for the numerical demonstrations. The demonstration is then extended to the case of multi-beams. The proposed combination method shows quick convergence over the single LMS or DFP method at the expense of the system matrix inversion.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1998년도 춘계학술발표회 논문집
• /
• pp.120-127
• /
• 1998

It is very difficult to execute the vibration analysis of a huge strucutre, which takes up much time and expense. In this paper we intend to make the equivalent system of a local vibration system of a huge structure with a view to improving the dynamic characteristics and reducing time and expense. First of all, upper deck structure model is maded. And we perform the vibration analysis by the Substructure Synthesis Method and execute the exciting test for the upper deck structure model, and observe the coincidences of two results to confirm the reliability of the analyzing tools used. To make the equivalent system, we give boundary condition to sub-structure that want to be modified and execute the Sensitivity Analysis Method and the Optimum Structural Modification Method. And we execute the structural modification of the equivalent system.. The following can be found from this study. 1. The analytical results are generally coincident with each other. 2. The equivalent system of the superstructure model can be easily obtained using the sensitivity analysis metho and the optimum structural modification method. 3. The structural modification using the equivalent system can be obtained good results above 90% of object value.

• 생명과학회지
• /
• 제9권5호
• /
• pp.575-580
• /
• 1999

Even if odorous compounds remained very low concentration in water, it caused strong odor. Because Geosmin and most of odorous compound had very vaporization, those were difficult to analyze with GC/MSD and Purge & Trap. So, we needed pre-treatment method for decreasing amounts of extracting solvents, improving recovery efficiencies and increasing analytical efficiencies. This study developed efficient technology for analyzing odorous compounds, using various adsorbents and extracting solvents. The optimum adsorbent was XAD resins. Especially, XAD-2, XAD-7 and XAD-2010 were superior, but XAD-2 of these and MTBE was the optimum extraction solvent. Other extraction solvent's efficiency was in order of MTBE>Dichloromethane>n-Hexane>Diethylether. The optimum NaCl dosage for increasing efficiency was 5g in liquid-liquid extraction method. The shaking time(0∼24hr) had no concern with adsorption efficiency. The optimum adsorbent was XAD-2 resin and extraction solvent was MTBE. Dosing NaCl, adsorption efficiency was increased in liquid-liquid extraction method, but NaCl has no effect on liquid-solid extraction method. In this experimental results, this method will apply to not only Geosmin but other well-known odorous compounds (2-MIB, IBMP, IPMP, TCA) and algae toxins (Mycrocystin, Anatoxin etc)

• 대한산업공학회지
• /
• 제30권2호
• /
• pp.120-129
• /
• 2004

This paper provides a simple but effective method, cost relaxation to escape from a local optimum of the traveling salesman problem. We would find a better solution if we repeat a local search heuristic at a different initial solution. To find a different initial solution, we use the cost relaxation method relaxing the cost of arcs. We used the Lin-Kernighan algorithm as a local search heuristic. In experimental result, we tested large instances, 30 random instances and 34 real world instances. In real-world instances, we found average 0.17% better above the optimum solution than the Concorde known as the chained Lin-Kernighan. In clustered random instances, we found average 0.9% better above the optimum solution than the Concorde.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.698-702
• /
• 2001

This paper presents a combinatorial method to compute the solutions of optimization problem. The present hybrid algorithm is the synthesis of an artificial life algorithm and the random tabu search method. The hybrid algorithm is not only faster than the conventional artificial life algorithm, but also gives a more accurate solution. In addition, this algorithm can find all global optimum solutions. And the enhanced artificial life algorithm is applied to optimum design of high-speed, short journal bearings and the usefuless is verified through this example.

• 대한기계학회논문집A
• /
• 제30권3호
• /
• pp.302-309
• /
• 2006

Effective mixing plays a crucial role in microfluidics for biochemical applications. Owing to the small device scale and its entailing the low Reynolds number, the mixing in microchannels proceeds very slowly. In this work, we optimize the configuration of obstacles in the Y-channel mixer in order to attain maximum mixing efficiency. Before the optimum design, mixing characteristics are investigated using unstructured grid CFD method. Then, the analysis method is employed to construct the approximate analysis model to be used in the optimization procedure. The main optimization tool in the present work is sequential quadratic programming method. Using this approximate optimization procedure, we may obtain the optimum layout of obstacles in the Y-channel mixer in an efficient manner, which gives the maximum mixing efficiency.

• 한국해양공학회지
• /
• 제2권1호
• /
• pp.95-105
• /
• 1988

This paper describes the development of a reliability-based optimum design technique for such three dimensional tubular frames as off shore structures. The objective function is formulated for the structural weight. Constraints that probability of failure for the critical sections does not exceed the allowable probability of failure are set up. In the evaluation of the probability of failure, fatigue as well as buckling and plasticity failure are taken into account and the mean-value first-order second-moment method(MVFOSM) is applied for its calculation. In order to reduce the computing time required for the repeated structural analysis in the optimization process, reanalysis method is also applied. Application to two and three dimensional simple frame structures is performed. The influence of material properties, external forces, allowable failure probabilities and interaction between external forces on the optimum design is investigated.