• Tunnel and Underground Space
• /
• v.25 no.1
• /
• pp.56-67
• /
• 2015

In this study, a source locating technique applicable to transversely isotropic media was developed. Wave velocity anisotropy was considered based on the partition approximation method, which simply enabled AE source locating. Sets of P wave arrival time were decided by the two-step AIC algorithm and they were later used to locate the AE sources when having the least error compared with the partitioned elements. In order to validate the technique, pencil lead break test on artificial transversely isotropic mortar specimen was carried out. Defining the absolute error as the distance between the pencil lead break point and the located point, 1.60 mm ~ 14.46 mm of range and 8.57 mm of average were estimated therefore it was regarded as thought to be 'acceptable' considering the size of the specimen and the AE sensors. Comparing each absolute error under different threshold levels, results showed small discrepancies therefore this technique was hardly affected by background noise. Absolute error could be decomposed into each coordinate axis error and through it, effect of AE sensor position could be understood so if optimum sensor position was able to be decided, one could get more precise outcome.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.3
• /
• pp.132-137
• /
• 2001

Recently, the demand for notebook PC with lithium ion batteries has steadily increased and consumers require them to adopt a SBP(smart battery pack) able to predict the remaining capacity and the run time of batteries precisely. The SBP is composed of a protection If, by which safety of lithium ion batteries is maintained against overcharge, overdischarge and overcurrent, and a smart IC, which calculates the remaining capacity and the remaining run time. The protection IC shut abmormal current down by using overcharge/overdischarge FET. A SBS(smart battery system) is composed of a system host, a smart battery and a smart battery charger. The smart ICs for SBP will be required to provide a low cost, low current consumption and small size. There will need to develop a microcomputer control type IC and an optimum algorism which is able to predict the residual capacity and the residual run time precisely. SBS will apply to many kinds of industry fields such as an electric bicycle, an electric vehicle, a load levelling and a military.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.345-350
• /
• 2006

This study investigated the removal of recalcitrant organics in dyeing wastewater using a fluidized bed reactor(FBR) that contained cell-immobilized pellets. The pellets were manufactured and condensing the gel phase by mixing PEG-polymer and cells to form micro-porous PEG-polymer pellets whose size were ${\Phi}\;4mm{\times}H\;4mm$ on average. An industrial activated sludge without any pre-adaptation was used for the cell immobilization because it gave an equivalent removal efficiency to a pre-adapted sludges. The feed was obtained from an effluent of a biological treatment plant, which contained $SCOD_{Cr}$ of 330 mg/L and $SBOD_5$ of 20 mg/L. The $SCOD_{Cr}$ removal efficiency was over 45% and the effluent $COD_{Mn}$ concentration was less than 100 mg/L at HRTs from 6 to 24 hrs. The optimum HRT in the FBR was determined as 12 hrs considering the removal efficiency and cost. When a raw wastewater containing 768 mg/L of $COD_{Cr}$ was fed to the FBR, the effluent $COD_{Cr}$ concentration increased only slightly, giving a 70% of $COD_{Cr}$ removal or a 97% of $BCOD_5$ removal. This indicated that the FBR had an excellent capability of biodegradable organics removal also. In conclusion, the FBR could be applied to textile wastewater treatment in place of an activated sludge process.

• The Korean Journal of Mycology
• /
• v.31 no.3
• /
• pp.141-147
• /
• 2003

The pileus of Pleurotus cystidiosus was attached at the side and was spatular-shape. It grew to the size of $7.6{\sim}9.8\;cm$ with dark brown color. The length of stem was $1.4{\sim}2.9\;cm$. The individual weight of fruiting-body was 25.4 g in average. This study was conducted to Investigate the physiological characteristics and to develop the artificial cultivation technique of P. cystidiosus. To find out the optimum condition of mycelial growth of P. cystidiosus, physiological conditions such as media, temperature, pH carbon sources and nitrogen sources were investigated. Various cultural media were used for the cultivation of P. cystidiosus and compost dextrose agar was favorable for mycelial growth. The optimal growing temperature and pH were in range of 25 to $30^{\circ}C$, pH $7{\sim}9$, respectively. When different carbon sources were compared, glucose was found to be best. However nitrogen sources were different with each strains. When different C/N ratio were compared, 20:1 of C/N ratio was found to be best.

• The Korean Journal of Mycology
• /
• v.32 no.2
• /
• pp.79-88
• /
• 2004

Cordyceps pruinosa grows upon dead pupae of Lepidoptera and produces one or $3{\sim}4$ club-shaped stromata per host. The stromata have distinct club-shaped head and long stalk. The length of stromata varies from $1{\sim}3\;cm$. Apical head consists of densely crowded semi-immersed perithecia, which are $360{\sim}400\;{\times}\;180{\sim}200\;{\mu}m$ in size. Asci are $150\;{\mu}m$ in length and $2.8{\sim}3\;{\mu}m$ in diameter. Ascospores, which are $124{\sim}141\;{\mu}m$ in length, have thin thread-like structures in the middle with part-spores attached on both sides. Each ascospore does not separate into part-spores after dispersal, but each part-spore germinates and together develops a colony. The imperfect form produces phialides of $15{\sim}24\;{\times}\;2{\sim}3\;{\mu}m$ size, with spherical or spindle shaped conidia of $4{\sim}6\;{\times}\;1.8{\sim}2.4\;{\mu}m$ size, The anamorph was identified as Mariannaea elegans Samson. YMA and SDAY agar media with pH 7 was produced abundant mycelial growth with high density. Best mycelial growth was observed when dextrin was used as a carbon source. Lactose, saccharose and sucrose also produced high mycelial growth. Peptone, yeast extract and tryptone produced abundant mycelial growth, when used as nitrogen sources. Highest mycelial growth and density was observed when C/N ratio was 1 : 1 at the concentration of 12.5 g/l each. $KH_2PO_4$ was the best mineral source for mycelial growth. Highest mycelial dry wt. was produced in YM and SDAY broths. Optimum inoculum for 100 ml of liquid broth was 6 mycelial discs. Similarly, optimum liquid culture period was 7 days.

• The Korean Journal of Mycology
• /
• v.29 no.1
• /
• pp.34-40
• /
• 2001

RAPD test and the observation of morphological, cultural characteristics of fourteen selected entomogenous fungi were conducted to investigate the analysis of their internal relationships. Paecilomyces tenuipes showed snow flower form attached to numerous white conidiophores, produced globular and semi-egg types on the club types of phialides. Cordyceps militaris formed globosely conidiophores, dark yellow fruiting body on pupa. The phialide as on Acremonium-type in global conidiophores. Beauveria bassiana covered with conidia was not formed fruiting body and adhered conidia on conidiophore of zigzag type. The PDA and SDAY medium were confirmed as an optimum growth of them. P. tenuipes showed to velvet and plane types in several media whereas C. militaris was belong to centrally raised and floccose in the morphological type. In contrast, B. bassiana covered with conidia on velvet shape. The size of amplified products were analyzed by RAPD using URP primer and were from 100 bp to 2.0 kb with $10{\sim}14$ geuomic DNA. Total similarities of two groups were by dendrogram of UPGMA analysis. The homology of P. tenuipes groups was 94.8 to 100%. It also showed 70.1 to 96.6% in C. militaris group and B. bassiana was higher similarity than any other. The internal change of C. militaris, produced telemorph fruiting body, was higher seperated in species than P. tenuipes and B. bassiana in the RAPD.

• Korean Journal of Food Science and Technology
• /
• v.43 no.2
• /
• pp.169-175
• /
• 2011

The ${\beta}$-xylosidase (EC 3.2.1.37) production capabilities of lactic acid bacteria in the genus Leuconostoc, isolated from a variety of kimchi (fermented vegetables), were examined. The intracellular levels of ${\beta}$-xylosidase were similar to the extracellular levels, when most Leuconostoc lactic acid bacteria were grown in a medium containing xylose as the carbon source. Intracellular ${\beta}$-xylosidase with a maximum activity of $1.2{\pm}0.1units/mL$ (mean${\pm}$standard error) was obtained from Leuconostoc lactis KCTC 13344, which was isolated from fermented Chinese cabbage. The optimum reaction conditions for Leu. lactis KCTC 13344 ${\beta}$-xylosidase activity were pH 6.0 and $30^{\circ}C$, and the addition of most divalent cations, except zinc, to the reaction mixture resulted in a slight increase in enzyme activity. Compared with a media containing other carbon sources, the ${\beta}$-xylosidase activity was 5 times higher when Leu. lactis KCTC 13344 was grown in a medium containing xylose as carbon source. Zymographic analysis indicated that the synthesis of Leu. lactis KCTC 13344 ${\beta}$-xylosidase (approximate size, 64 kDa) is induced by xylose. A maximum intracellular ${\beta}$-xylosidase activity of $7.1{\pm}0.3units/mL$ was obtained in a batch cultivation in an MRS medium containing 30 g/L xylose.

• The Korean Journal of Mycology
• /
• v.36 no.1
• /
• pp.58-62
• /
• 2008

'Miso', a new variety of oyster mushroom was developed for the bottle culture at the Chungnam Agricultural Research & Extension Services. Its mycelium grew rapidly with $8.4{\sim}8.6\;mm/day $ at $25{\sim}28^{\circ}C$ on PDA medium. The optimum pH of the mycelial growth was pH 5.0. It took 24 days for the primitive primordium formation after inoculation on pine sawdust media mixed with 20% wheat bran. Fruiting body color was white, and the shape of pileus was convex-umbonate. In the bottle culture, the yield was 115.7 g per 850 ml bottle. Stipe length was about 54 mm, the number of stipe per bottle was 18.1, the size of pileus was 28 mm, and gill was crowded. The moisture content of 'Miso' was lower than that of Jangan No.5 and Wonhyeong No.1, and contents of protein, ash and sugar of 'Miso' were higher than those of other varieties, and tannin acid content of 'Miso' was lower than that of others. On the basis of AFLP analysis, the 'Miso' was distinct not only from Wonhyeong No.1, but also from their closest relative, oyster mushrooms.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.2
• /
• pp.55-58
• /
• 2004

The objective of this study was to get information about water retention characteristics of horticultural substrates used in Korea determined by European standard method. Water retention curves were prepared at water volume (v/v, %) in relation to -10 cm, -50 cm, -100 cm water pressure head. Water retention curves showed different properties depending upon the type, the place of origin, particle size, and manufacturing processes of substrates. Peat and coir had easily available water content in the range of 30-40% and showed high water holding capacity, water buffering capacity, and aeration for plant growth. However, bark, sawdust and rice hull showed low water holding capacity about below 10%. The easily available water content of perlite and clay ball was low about 0.1-13.8%, whereas that of vermiculite and rockwool granulate was high about 25.9-52.0%. Understanding water retention characteristics of growing substrates is very important in cstablisliing optimum condition for plant growth. Further study on water retention curves for more substrates, mixture and growing media is needed.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.2
• /
• pp.412-420
• /
• 2005

In order to investigate factors affecting the denitrification in the F-STEP PROCESS using a loess ball as support media and Pseudomonas DWC 17-8, calcining temperature, loess ball size, pH, nitrate concentration, working temperature, and inhibitor were studied in batch mode using synthetic sludge. A 5- 10 mm of loess ball (960$^{circ}$ of calcining temperature) was the most suitable for denitrification. When the initial pH was increased from 3.0 to 7.0, the removal efficiency of nitrate was increased. Specifically, at initial pH of 7.0, the maximum removal efficiency of nitrate was 5.0 mg/min. When the initial concentration of nitrate was increased from 100 to 400 mg/l, the removal efficiency of nitrate was proportional to the concentration of nitrate. The maximum removal efficiency of nitrate was 5.72 mg/min at 400 mg/l of initial concentration. When the operating temperature was increased from 10 to 30$^{circ}$, the removal efficiency of nitrate was increased from 0.76 to 6.15 mg/min, and at above 40$^{circ}$ of operating temperature, it was decreased from 4.0 to 2.0 mg/min. Among the various inhibitors, higher than 10$^{-1}$ M of sodium azide abolished this reaction completely. When the KCN concentration was above 10$^{-1}$ M, the reaction was inhibited completely. In the case of 2,4-dinitrophenol and sodium sulphide, it was inhibited at above 10$^{-2}$ M completely. For testing the various flow orders of the F-STEP PROCESS for effective denitrification using practical wastewater, continuous experiments under the optimum conditions were carried out for 60 days. Among the various processes, the PROCESS A gave the highest efficiencies of denitrification, nitrification, and total nitrogen (TN) removal with 86.5, 89.5, and $90\%$, respectively. For scale-up in the PROCESS A, real farm wastewater was used and pilot tests carried out for 90 days. The denitrification efficiency was $97.5\%$, which was increased by $12.7\%$. The efficiencies of TN removal and nitrification were 96.6 and $70.0\%$, respectively. The removal efficiency of chemical oxygen demand (COD) was $63.7\%$, which was increased by $20\%$.