• 인간식물환경학회지
• /
• 제24권5호
• /
• pp.499-507
• /
• 2021

Background and objective: This study was carried out to develop an effective technique for raising seedlings of Veronica pyrethrina Nakai, a native plant species in the Korean Peninsula, in plug trays. Methods: To investigate the optimum plug cell size and sowing media, we sowed seed in to plug trays with 34, 21, and 10 mL cells and filled with a commercial horticultural substrate and mixtures of peatmoss and perlite in 1:1, 3:1, and 4:1 ratios. Fertilization levels were set at 0, 500, 1000 and 2000 mg·L^-1. Results: Plug cell size did not significantly influence the seedling growth of V. pyrethrina. By substrate type, the growth rate was highest in the horticultural substrate, followed by 4:1, 3:1, and 1:1. Growth by fertilization level was higher in all fertilized treatment groups than in the control group, and there was no difference among 500, 1000, and 2000 mg·L^-1. Conclusion: The results of this study proved that it is most suitable for raising seedlings of V. pyrethrina to sow the seeds in a 10 mL cell plug tray filled with horticultural substrates, and apply fertilizers with less than 500 mg·L^-1 concentration.

• 한국자기학회지
• /
• 제12권2호
• /
• pp.57-63
• /
• 2002

Nd-Fe-B계 소결자석의 특성을 향상시키기 위해서는 Nd-Fe-B계 합금의 조성 및 제조공정을 조절하여 자성분말의 입도 및 입도분포, 강자성상인 N $d_2$F $e_{14}$B상의 분율, 자성분말의 배향도, 산소 함량, grain size 등과 같은 factor들을 최적화 하여야 한다. 본 연구에서는 실험실 규모로 Nd-Fe-B계 합금 조성 및 공정 조절을 통하여 Nd-Fe-B계 소결자석을 제조하는 연구를 수행하였으며, 분쇄매체 분쇄시간 및 ball size에 따른 Nd-Fe-B계 소결자석의 자기적특성을 분석하여 최적의 분쇄조건을 조사하였다. 또한 분쇄공정 중 FeGa합금을 첨가하여 잔류자속밀도의 감소없이 Nd-Fe-B계 소결자석의 보자력을 향상시킬 수 있었다. 이와 같은 분쇄 조건의 연구, FeGa 합금에 의한 보자력 향상, 건식분쇄 방법 및 powder blending 공정을 적용하여 잔류자속밀도( $B_{r}$,) : 14.4kG, 보자력($_{i}$ $H_{c}$) : 9.4kOe, 최대자기에너지적((BH)$_{\max}$) : 47 MGOe의 자기적 특성을 갖는 Nd-Fe-B계 소결자석을 제조하였다.

• 대한환경공학회지
• /
• 제29권3호
• /
• pp.289-296
• /
• 2007

본 연구에서는 음식물 쓰레기를 황토와 혼합하여 고온 열분해 과정을 거쳐 다공성 담체를 제조하고, 이를 하수처리용 담체로 적용하고자 하였다. 이에 열분해 장치를 이용하여 다공성 담체를 제조하는 1단계 실험과 실험실 규모의 하수처리 장치에 이 다공성 담체를 충진하여 수처리 효율을 분석하는 2단계로 실험을 진행하였다. 다공성 담체 제조를 위한 열분해 장치의 최적 운전조건을 결정하기 위하여, 1단계 실험에서 열분해 장치의 온도조건과 음식물 쓰레기와 황토의 혼합비를 달리하여 각각의 조건에서 제조된 다공성 담체의 비표면적, 기공률, 압축강도 등의 물리적 특성을 확인하였다. 그 결과로서 음식물 쓰레기와 황토의 혼합비 1:1, 열분해 온도조건 $1,100^{\circ}C$가 최적 운전조건인 것으로 나타났다. 2단계 실험에서는 제조된 다공성 담체에 대하여 수질정화용으로서의 적용가능성을 평가하였으며, 그 결과 실험시작 8일째부터 TOC 87.3%, COD 85.0%의 처리효율을 가지는 것으로 나타났다. 또한 전체 기공률 37.0% 와 $1\sim20{\mu}m$ 사이의 기공크기를 가지는 구조내에서 미생물 활성화가 활발하게 이루어지고 있는 것을 확인할 수 있었다.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.395-402
• /
• 2015

The suspension plasma spray (SPS) technique has been used to obtain dense $Y_2O_3$ coatings and to overcome the drawbacks of the conventional air plasma spray (APS). SPS uses suspensions containing micrometer or sub-micrometer sized powders dispersed in liquid media. In this study, microstructure developments and mechanical properties have been investigated as functions of particle size of source material and plasma processing parameters such as plasma power and stand-off distance. The microstructure of the coating was found to be highly related to the particle size and the plasma processing parameters, and it was directly reflected in the hardness and the adhesion strength. When fine powder (BET $16.4m^2/g$) was used as a raw material in the suspension, there was, with increasing stand-off distance, a change from a dense structure with a slightly bumpy surface to a porous structure with a cauliflower-like surface. On the other hand, when a coarse powder (BET $2.8m^2/g$) was used, the coating density was lower, with microscopic splats on the surface. Using fine $Y_2O_3$ powders, the coating layer with an optimum short stand-off distance showed a high hardness of approximately 90% of that of sintered $Y_2O_3$ and an adhesion strength several times higher than that of the coating by conventional APS.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2003년도 제10차 국제학술회의 및 추계정기 학술발표회
• /
• pp.21-21
• /
• 2003

An efficient plant regeneration system was developed for Hordeum vulgare L. cv Baegdong - an important Korean cultivar. The protocol was based on a series of experiments involving the sizes of mature embryos and the culture media. The embryo size is found to be critical for the establishment of embryogenic callus. Embryos of 1.1-1.5 mm size showed a much higher ability to produce embryogenic callus capable of regenerating green plants. The auxins picloram and dicamba proved effective in inducing callus from mature embryos. 2.5 mg $I^{-1}$ dicamba and 4.0 mg $I^{-1}$ picloram in Murashige and Skoog's (MS) medium was optimum for the induction of primary callus. The induced primary callus was loose and friable which ultimately developed into creamy white and compact callus after transferring into the fresh medium. Multiple shoots were induced in the MS medium supplemented with 6.0 g $I^{-1}$ maltose, 20 mg $I^{-1}$ sorbitol, 0.5 mg $I^{-1}$ 2,4-D and 1.0 mg $I^{-1}$ kinetin and the rate was 6.5 shoots per embryo. Regenerated plants were hardy and developed roots rapidly in the medium containing 0.2 $I^{-1}$ IBA. This efficient plant regeneration system provides a foundation for generating transgenic plants of this important barley cultivar.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2003년도 심포지엄
• /
• pp.59-67
• /
• 2003

An efficient plant regeneration system was developed for Hordeum vulgare L. cv Baegdong - an important Korean cultivar. The protocol was based on a series of experiments involving the sizes of mature embryos and the culture media. The embryo size is found to be critical for the establishment of embryogenic callus. Embryos of 1.1-1.5 mm size showed a much higher ability to produce embryogenic callus capable of regenerating green plants. The auxins picloram and dicamba proved effective in inducing callus from mature embryos. $2.5\;m;I^{-1}$ dicamba and $4.0\;mg\;I^{-1}$ picloram in Murashige and Skoog's (MS) medium was optimum for the induction of primary callus. The induced primary callus was loose and friable which ultimately developed into creamy white and compact callus after transferring into the fresh medium. Multiple shoots were induced in the MS medium supplemented with $6.0\;g\;I^{-1}$ maltose, $20\;mg\;I^{-1}$ sorbitol, $0.5\;mg\;I^{-1}$ 2, 4-D and $1.0\;mg\;I^{-1}$ kinetin and the rate was 6.5 shoots per embryo. Regenerated plants were hardy and developed roots rapidly in the medium containing $0.2\;I^{-1}$ IBA. This efficient plant regeneration system provides a foundation for generating transgenic plants of this important barley cultivar.

• 한국입자에어로졸학회지
• /
• 제11권1호
• /
• pp.9-19
• /
• 2015

This study investigated the effects of ball mill operation condition on the morphology of raw powders in the dry-type milling process using three types of ball mills traditional ball mill, stirred ball mill and planetary ball mill. Furthermore, since spherical powders offer the best combination of high hardness and high density, the optimum milling condition to produce sphere-shaped powders was studied. The applied rotation speed ranged from 200rpm (low rotation speed) to 700rpm (high rotation speed). The used ball size ranged from 1mm to 5mm. The metal powder morphology was studied using SEM, XRD and PSA. The aimed spherical powders could be obtained under the optimum experimental conditions: traditional ball mill(200rpm, 1mm ball), planetary ball mill (500rpm, 1mm ball) and also planetary ball mill (700rpm, 1 and 3 mm ball). The results show to the development of new material using spherical type copper powder/CNT composites for air-craft and automotive applications.

• 한국자원식물학회지
• /
• 제12권4호
• /
• pp.289-296
• /
• 1999

생강 근경썩음병 길항균 Bacillus polymyxa 'HB26-5' 균주를 이용한 생물적 방제 가능성을 알아보기 위한 배양적 특성 및 제형화, 근권정착률을 조사한 결과 배양적온은 $25^{\circ}C$였고, 배지의 산도는 7.0에서 생육이 좋았으나 시간이 지남에 따라 초기에는 pH6.I~6.5의 약산성으로 되었다가 7일 후에는 pH7.8~8.2의 약알칼리성으로 변하였다. 길항균의 토양정착을 돕기 위해 첨가된 유기물중 쌀겨와 피트 또는 쌀겨와 카올린을 혼합한 제제가 토양처리 후 7주까지 길항균의 밀도 변화가 가장 작았다. 그러나 실제 노지포장에 처리하였을 경우 3주 후부터 밀도가 떨어지기 시작하였다. 제형의 경도,크기 등 물리적 특성과 길항균의 밀도유지 등을 고려할 때 알긴산 나트륨 2%, kaolin 15%, 쌀겨 3%를 혼합한 제형이 가장 우수하였다.

• Journal of Plant Biotechnology
• /
• 제35권2호
• /
• pp.163-167
• /
• 2008

Adventitious buds appeared within 2 weeks on the base of the petiole explants and increased for two months. A maximum of regeneration (15.6%) was obtained on the medium containing $1.5\;{\mu}M$ TDZ in combination with $1\;{\mu}M$ IBA. To know which explants are the best for the induction of regeneration, three explants such as leaf, petiole and leaf-petiole were used. Among the explant types, the leaf-petiole explant was significantly more effective than leaf and petiole for promoting adventitious shoots, with leaf-petiole inducing at the highest regeneration frequency (33.7%). The regeneration frequency of adventitious shoots in the leaf-petiole explants was significantly affected by leaf size and the position of explants. The leaf-petiole smaller than 5 mm leaf in width was induced at the highest regeneration frequency (68.9%). The smaller leaf sizes, the greater regeneration frequency. Also when the leaves are nearer to the shoot tip, the regeneration frequency is higher. When the rooted micro-shoots were transferred to the soil after growing for 6 weeks in the media, the survival rate was 90%.

• 상하수도학회지
• /
• 제24권1호
• /
• pp.5-14
• /
• 2010

A pilot-scale biological aerated filter (BAF) was operated with an anaerobic, anoxic and oxic zone at $23{\pm}1^{\circ}C$. The influent sCOD and total nitrogen concentrations in the feedwater were approximately 250 mg/L and 35 mg N/L, respectively. sCOD removal at optimum hydraulic retention time (HRT) of 3 hours with recirculation rates of 100, 200 and 300% in the column was more than 96%. Total nitrogen removal was consistently above 80% for 4 and 6 hours HRT at 300% recirculation. For 3 hours HRT and 300% recirculation, total nitrogen removal was approximately 79%. Based on fitting results, the kinetic parameter values on nitrification and denitrification show that as recirculation rates increased, the rate of ammonia and nitrate transformation increased. The ammonium loading rates for maximum ammonium removed were 0.15 and 0.19 kg $NH_3$-N/$m^3$-day for 100% and 200% recirculation, respectively. The experimental results demonstrated that the BAF can be operated at an HRT of 3 hours with 200 - 300% recirculation rates with more than 96 % removal of sCOD and ammonium, and at least 75% removal of total nitrogen.