• Journal of the Korean Statistical Society
• /
• 제5권1호
• /
• pp.49-59
• /
• 1976

This paper is to present an iterative method for determining an optimum geographic location pattern for the warehouses (sources) that are employed to serve or supply, known quantities of its finished product to a set of custormer areas (destinations) that have fixed and known locations, where the number of sources is permitted to vary. What must be determined, in this paper, is the number and location of the sources or warehouses that will minimize the combined costs of transferring and storing the total quantity of products demanded in the destinations or customer areas.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.399-404
• /
• 1999

This study were performed to find the cooling effect and to provide design data during summer season for the Pad& Fan system of greenhouse . The temperature variation along the greenhouse width were analyzed. Also, the effect of the pad location and fan capacity on the cooling of the greenhouse were analyzed. While Pad &Fan systems were operating the temperatures in greenhouse were very different along the meausring locations. It is recommeded that PAD location and FAN capacity should be considered to design the Fan and Pad system in order to provide greenhouse the optimum temperature condition.

• Journal of Biosystems Engineering
• /
• 제22권2호
• /
• pp.105-116
• /
• 1997

Using the design variables and conditions reported in the rut part of this paper, an analysis and optimum design of the tractor-rotary power driveline were carried out. The optimum design method involved 1 variable, 2 variable and multiple variable analysis performed as requested in the design process. In order to evaluate the effects of the design variables on the power transmission performance a sensitivity analysis were also conducted. the results indicated that the length and link point of the upper link, the upper hitch point of the implement master and the location of the implement input connection affect most significantly the driveline performance. The optimum design improved the performance of an exampled tractor-rotary driveline by 93% in terms of cosine ratio.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.69-72
• /
• 2002

The objectives of this study are to analysis structural characteristics of small scale vinyl house and to develope structural analysis program for optimum design. The variation of maximum section forces along the structural characteristics, location and number of purlin was analyzed in vinyl house. It was concluded that the developed structural analysis program could be used usefully for optimum design of small scale vinyl house.

• Journal of Biosystems Engineering
• /
• 제18권4호
• /
• pp.390-401
• /
• 1993

This study was conducted to analyze the optimum capacity of Rice Processing Complex (RPC) and to select the optimum location of RPC based on the analysis of rice production and its commercializing rate for each county of major area of paddy field nationally. The study results showed that 500 of RPC having a drying capacity of 3,000 tons of rice would be needed nationally based on the selection analysis.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.161-172
• /
• 2017

In the paper, a hybrid technique is proposed for detecting the location and capacity of distributed generation (DG) sources like wind and photovoltaic (PV) in power system. The novelty of the proposed method is the combined performance of both the Biography Based Optimization (BBO) and Particle Swarm Optimization (PSO) techniques. The mentioned techniques are the optimization techniques, which are used for optimizing the optimum location and capacity of the DG sources for radial distribution network. Initially, the Artificial Neural Network (ANN) is applied to obtain the available capacity of DG sources like wind and PV for 24 hours. The BBO algorithm requires radial distribution network voltage, real and power loss for determining the optimum location and capacity of the DG. Here, the BBO input parameters are classified into sub parameters and allowed as the PSO algorithm optimization process. The PSO synthesis the problem and develops the sub solution with the help of sub parameters. The BBO migration and mutation process is applied for the sub solution of PSO for identifying the optimum location and capacity of DG. For the analysis of the proposed method, the test case is considered. The IEEE standard bench mark 33 bus system is utilized for analyzing the effectiveness of the proposed method. Then the proposed technique is implemented in the MATLAB/simulink platform and the effectiveness is analyzed by comparing it with the BBO and PSO techniques. The comparison results demonstrate the superiority of the proposed approach and confirm its potential to solve the problem.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권6호
• /
• pp.16-24
• /
• 2017

본 논문은 오프셋 아웃리거의 최적위치를 알기 위하여 우선 아웃리거 구조시스템이 설치된 80층의 초고층건물을 대상으로 MIDAS-Gen을 이용하여 계획설계 수준의 구조설계를 실시하였다. 그리고 본 연구에서는 기둥의 강성, 아웃리거의 평면상 위치, 아웃리거의 설치 높이 등을 주요한 변수로 선택하여 구조해석을 진행하였다. 또한 초고층건물의 오프셋 아웃리거에 대한 최적위치를 찾는 것을 목적으로 초고층건물의 구조설계에서 가장 필수적인 최상층에서 발생하는 수평변위를 분석하였다. 본 연구의 결과, 기둥의 강성, 아웃리거의 평면상 위치, 아웃리거의 설치 높이는 아웃리거 구조시스템의 최적위치에 영향을 주는 것으로 나타났다. 또한 본 연구의 결과는 초고층건물의 오프셋 아웃리거 구조시스템의 최적위치를 알려주는 구조설계 자료로 유용하다고 사료된다.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.101-108
• /
• 2004

In this study, open conical shells with ring and stringers are analyzed A versatile 4-node shell element which is useful for the analysis of conical shell structures is used and 3-D beam element is used for stiffeners. An improved flat shell element is established by the combined use of the addition of non-conforming displacement modes and the substitute shear strain fields. The proposed element has six degrees of freedom per node and permits an easy connection to other types(beam element) of finite elements. Optimum location and optimum section properties of ring and stinger are obtained. It is shown thai the thickness of conical shell can be reduced about $20\~50\%$ by appropriate location of stiffeners.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.461-466
• /
• 1994

This paper is concerned with the positioning control of a flexible arm system using H$_{\infty}$ control theory with optimum sensor location. Firstly, by virtue of the orthogonality of the flexible modes of the flexible arm a reduced order model of the tributed parameter system(DPS) representing the arm has formulated. The dynamical coupling between the flexible arm and DC motor has been considered to formulate an motor composite model. In order to achieve precise positioning with vibration attenuation, sensors have been optimally located. Finally, a robust H$_{\infty}$ controller was designed and the performance of the positioning system has been analyzed.d.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권3호
• /
• pp.255-260
• /
• 2015

플래시증발현상은 개방챔버 내의 온도, 압력, 수위 그리고 배플 등에 영향을 받는다. 이 연구에서 PIV 실험은 최적의 배플 위치와 높이에 대한 개방챔버 내의 유동특성을 확실하게 시행하였다. 배플은 개방챔버 내의 재순환 흐름, 수력 도약 그리고 유동특성에 상당한 영향을 주었다. 그리고 레이놀즈수의 영향은 미미하였다. 최적의 배플높이는 h/H=1.5였고, 최적의 배플위치는 개방챔버 내부 입구로부터 x/H=1.5부근 이었다.