• KSBB Journal
• /
• 제13권5호
• /
• pp.547-553
• /
• 1998

For the efficient production of a new exo-polysaccharide from Ganoderma lucidum ASI 7004, the optimum conditions and methods in submerged cultivation were investigated with an airlift fermenter system. The optimum aeration rate was 2.5 Wm at the initial pH 5.0 and 28$^{\circ}C$. The increase of dissolved oxygen concentration by pure oxygen supply during cultivation did not improved the exo-polysaccaride production and the mycelial growth. The maximum exo-polysaccharide production and the mycelial growth under the optimum culture condition were obtained in media of glucose 60g/L, yeast extract 6g/L, (NH4)2HPO4 1g/L and KH2PO4 0.5g/L. Under these optimum medium and culture conditions, about 7.15g/L of exo-polysaccharide and 13.9g/L of mycelial growth were producted, respectively.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권1호
• /
• pp.18-25
• /
• 2002

The software reliability is defined, and not only the relations between testing time and reliability, but also the relation between duration following failure fixing and reliability are studied in this paper. The release time making the testing cost to be minimum is determined through evaluating the cost for each condition. Also, the release time is determined depending on the conditions of the first reliability, considering the specified reliability. the optimum release time is determined by simultaneously studying two optimum release time issues that determine both the cost related time and the specified reliability related time. And, each condition and limitation are studied. The trend of the optimum time is also examined.

• 한국CDE학회논문집
• /
• 제5권2호
• /
• pp.184-195
• /
• 2000

MDO (Multidisciplinary Design Optimization) methodology is an emerging new technology to solve a complicate structural analysis and design problem with a large number of design variables and constraints. In this paper MDO methodology is adopted through the use of computer aided systems such as Geometric Solid Modeller, Mesh Generator, CAD system and CAE system. And this paper introduces MDO methodology as a new method for structural analysis and design through the application to the structural design of flap drive system. In a MDO methodology application to the structural design of flap drive system, kinetodynamic analysis is done using a simple aerodynamic analysis model for the air flow over the flap surface instead of difficult aerodynamic analysis. Simultaneously the structural static analysis is done to obtain the optimum structural condition. And the structural buckling analysis for push pull rod is also done to confirm the optimum structural condition (optimum cross section shape of push pull rod).

• 대한기계학회논문집A
• /
• 제31권5호
• /
• pp.601-608
• /
• 2007

To meet demand of big capacity and high speed rotation for washing machine, more stress from bending and twisting are complexly loaded onto the shaft supporting the horizontal drum, causing problems in fracture strength and fatigue life. Shafting system is mainly divided into flange and shaft. Flange is located between the drum and shaft, transferring power from the shaft to drum, and acting as a supporter of the back of the drum. Because section of flange has various design factors according to configuration of flange, the optimum conditions can’t be easily determined. Using a design of experiment (DOE), this study was performed investigating the interaction effect between factors as well as the main effect of the each design factor under bending and twist and proposed optimum condition using center composition method among response surface derived from regression equation of simulation-based DOE.

• 한국식품영양과학회지
• /
• 제27권1호
• /
• pp.102-108
• /
• 1998

This study was performed to establish manufacturing of garlic vinegar which has medical action component of garlic and functionality of vinegar. Optimum alcohol concentration, and garlic juice concentration for the mpnufacturing of garlic vinegar were 5%, 10%, respectively, and the optimum conditions were obtained when the fermentation was carried out at agitation of agitation of 120rpm and temperature of 3$0^{\circ}C$. The acetic acid content of optimum condition was 4.87% and thiosulfinate content was 37.5mg after 20days fermentation. The major organic acid compositions in garlic vinegar were oxalic acid, citric acid, malic acid and acetic acid, and free amino acid compositions were aspartic acid, threonine, serine, glutamic acid, alanine etc.

• 한국항공우주학회지
• /
• 제31권7호
• /
• pp.63-68
• /
• 2003

쇼트피닝 가공은 금속부품의 피로특성 향상을 위해 대부분 널리 이용되고 있는 방법이다. 쇼트피닝 가공에 있어 재현성이 있고 신뢰할 수 있는 최적화된 피로특성 증가를 위해 가장 중요한 점이 쇼트피닝 변수 조절이다. 본 논문에서는 최적 피닝강도(알멘강도) 조건에 대한 실험적인 연구가 수행되었다. 피로 특성에 관한 최적피닝의 효과를 검토하기 위하여 회전굽힘피로시험법을 채택하였다. 실험 결과 피로강도와 피로수명이 최적피닝 조건에 의해 크게 증가하였으나 언더피닝 및 오버피닝의 경우에는 감소함을 보였다.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2009년도 추계학술발표논문집
• /
• pp.100-102
• /
• 2009

Effect of temperature, pH and soil depth on germination of Dianthus chinensis, Dianthus barbatus, and Perennial pennant were investigated in growth chamber and soil condition at the ratio of 7:3 (natural soil and organic soil) in laboratory condition. the optimum temperature for seed germination was recorded for $20^{\circ}C-\;25^{\circ}C$. Maximum germination was observed for Dianthus barbatus (76%) where as in soil condition Perennial pennant (51%) showed maximum germination at 1 cm soil depth. Similarly, optimum pH for seed germination was at pH 6 in all the species. So in lower pH (at pH4) seed germination was inhibited. Germination of these selected species at different environmental condition help to construct the ecological sound proof wall to mitigate the noise especially in urban areas.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.563-564
• /
• 2006

In silicon wafer manufacturing process, the grinding process has been adopted to improve the flatness of water. The grinding of wafer is usually used by the infeed grinding machine. Grinding conditions are spindle speed, feed speed, rotation speed, grinding stone etc. But grinding condition selection and analysis is so difficult in grinding machine. In the intelligent grinding system based on knowledge many researchers have studied expert system, neural network, fuzzy etc. In this paper we deal grinding condition selection method, Taguchi method and Genetic Analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 춘계학술대회 논문집
• /
• pp.30-33
• /
• 1994

This paper studies on the effect of DSC(Differential Scanning Calorimeter) analysis condition on the glass transition temperature of silica filled epoxy network polymer used for ultra-high voltage apparatus. The effects of temperature scanning rate specimen size and gas flow rate on measured glass transition temperature have been studied in order to select optimum thermal analysis condition.

• Korean Chemical Engineering Research
• /
• 제53권2호
• /
• pp.181-192
• /
• 2015

본 연구는 Liquid Crystal Display (LCD) 세척 후 발생하는 Propylene Glycol Monomethyl Ether Acetate (PGMEA)폐액 재활용을 위한 2기 증류탑을 사용하는 공정의 최적 조건을 산출하였다. 공정조건 최적화 기법으로 다중회귀분석을 이용하여 1차 증류 시 Bottom 온도(BTM 온도), Reflux 량, Feed 량 및 Feed 온도에 따라 PGMEA 함량에 대한 최적 조건과 2차 증류 시 BTM 온도, Reflux 량, Feed 량에 따른 PGMEA 함량에 대한 최적 조건과 공정인자를 산출하였다. 1차 증류탑의 공정인자 중 Reflux 량, Feed 온도 및 Feed 량이 중요한 인자로 산출되었다. 본 연구의 공정조건 범위에서는 BTM 온도범위가 PGMEA함량에 크게 영향을 주지 못하였다. 따라서 최적 공정 조건은 Feed 량 $5,700{\ell}$, Reflux 량 $2,500{\ell}$, BTM 온도 $165^{\circ}C$ 및 Feed 온도 $130^{\circ}C$이며 이때 예측된 PGMEA 함량은 92.12~94.62%로 산출되었다. 2차 증류탑에서는 Reflux 량이 함량에 많은 영향을 미치고 있으며, Feed 량과 BTM 온도도 영향을 미치는 인자로 산출되었다. 다중공선성(Multicollinearity)이 Reflux 량과 BTM 온도 간에 강한 양의 상관관계가 있어, 두 인자 중 다중회귀식에 영향이 지배적인 인자 하나를 선택하였으며, 최적조건은 BTM 온도 $199^{\circ}C$ 기준에서 최적 공정 조건은 Feed 량 $4,275{\ell}$ 및 Reflux 량 $6,200{\ell}$이며, 이때 예측 PGMEA 함량은 99.0~99.5%로 산출되었다.