• 제어로봇시스템학회논문지
• /
• 제14권6호
• /
• pp.511-514
• /
• 2008

2-wavelength type white OLED devices have been made consisted of two layers; a layer with blue light emitting DPVBi host and other EML layer with yellow emitting rubrene dopant. New method to get white emitting device has been suggested by varying thicknesses of the DPVBi layer. The ITO/2-TNATA($150{\AA}$)/NPB($350{\AA}$)/DPVBi($35{\AA}$)/DPVBi:rubrene (2wt%,$200{\AA}$)/DPVBi($100{\AA}$)/Alq_3($50{\AA}$)/LiF($5{\AA}$)/Al($1000{\AA}$) structure has showed optimum results in CIE coordinates of (0.3233, 0.33). OLED devices with this structure has properties of $1.2d/m^2$ at turn-on voltage of 3.9V and $1037cd/m^2$ at 7.9V. This structure has advantages of simple fabrication and easy to emit the white color.

• Transactions on Electrical and Electronic Materials
• /
• 제7권5호
• /
• pp.267-270
• /
• 2006

The Indium tin oxide (ITO) films were deposited on CR39 substrate using DC magnetron sputtering. ITO thin films deposited at room temperature because CR39 substrates its glass-transition temperature of is $130^{\circ}C$. ITO thin films used bottom and top electrode and for organic thin film transparent transistor.(OTFT) ITO thin film electrodes electrical properties and optical transparency properties in the visible wavelength range (300 - 800 nm) strongly dependent on volume of oxygen percent. For the optimum resistivity and transparency of ITO thin film electrode achieved with a 75 W plasma power, 10 % volume of oxygen and a 27 nm/min deposition rate. Above 85 % transparency in the visible wavelength range (300 - 800 nm) measured without post annealing process and $9.83{times}10{-4}{\Omega}cm$ a low resistivity was measured thickness of 300 nm.

• 한국염색가공학회지
• /
• 제13권3호
• /
• pp.165-171
• /
• 2001

In this study, UV/vis. spectra of color solution extracted from onion shell and dyeing properties of polyamide fibers such as wool, silk, and nylon were investigated. Also, the effect of mordanting on wash fastness and light fastness was Investigated. The amount of colors extracted was increased with extracting temperature and time. The wavelength of maximum absorption of onion shell extract corresponds to flavonol peak and quercetin peak. Also, spectra of color solution were shifted to longer wavelength at higher pH values. It appeared that the optimum condition of the dyeing of wool, nylon, and silk fabrics with onion shell extract was $60^\circ{C}$ , 30min, and pH 4.0 of dyed bath. Surface colors of the dyed fabrics were different according to the used mordants: Al and Cr mordanted fabrics were dyed in yellowish colors, Cu mordanted fabric in greenish color, Sn mordanted fabric in orange color, and Fe mordanted fabric in khaki color. The mordanting was effective at improving wash fastness and light fastness.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.49-49
• /
• 2003

Nanometer sized zinc oxide (ZnO) powder was synthesized by a novel "solution-combustion method" and its photocatalytic activity was evaluated with the recovery of Ag from a used photofilm developing solution. Different parameters affecting the reaction rates like wavelength of the W light used, reaction temperature, mass of the used photocatalyst, and effect of scavenger were tested. The optimum parameters were found as follows. UV wavelength of less than 385nm, reaction temperature between 40- 60 $^{\circ}C$, photocatalyst concentration of 3-6 g/1, and scavenger concentration of 0.3-0.4 g/1.

• 한국진공학회지
• /
• 제5권2호
• /
• pp.147-155
• /
• 1996

Optical properties of $TiO_2/M/Ag/M/TiO_2$ films have been changed with the diffusion barrier metal M. Optimum opticla properties of $TiO_2/M/Ag/M/TiO_2$ as the transparent heat mirror film, could be obtained with Ti among diffusion barrier metals of Ti, Cu, Zr and Al. $TiO_2/M/Ag/M/TiO_2$ film, which was fabricated by sputtering of 18 nm-thick $TiO_2$ and Ag, and 4nm-thick Ti, showed maximum transimittance of 89% at visible wavelength and infrared reflectance of 97% at wavelength of 3000 nm. Optical properties of this film was not degraded by Xenon-sunshine weather test for 240 hours. For specimens with barrier layers of Cu, Zr, and Al, degradation of optical properties by weather test was increased in a sequence of films with Cu, Zr, and Al barrier layers.

• 전자공학회논문지D
• /
• 제34D권4호
• /
• pp.79-86
• /
• 1997

An electro-optic polymer digital optical switch with rib waveguides is designed and fabricated by using the RIE method. POlarization-independent and wavelength-insensitive operation is demonstrated at the wavelengths of 1.3mm and 1.55mm, for the first time in electro-optic polymer-based devices. The rib waveguides have been designed to achieve good guiding properites for both TE and TM polarizations by controlling the etching depth as well as its aspect ratio. Especially theetching depth is controlled to change the guided mode profiles of the rib waveguide and thus to achieve an optimum coupling in the branch. The measured crosstalk is better than -16dB and the extincton ratio of each output port is greater than 16dB.

• 센서학회지
• /
• 제16권3호
• /
• pp.229-233
• /
• 2007

The indium tin oxide (ITO) films were deposited on CR39 substrate using DC magnetron sputtering. The ITO thin films deposited at room temperature because CR39 substrate its glass-transition temperature is $130^{\circ}C$. The ITO thin films used bottom and top electrode and for organic thin film transparent transistors (OTFTs). The ITO thin film electrodes electrical properties and optical transparency properties in the visible wavelength range (300-800 nm) strongly dependent on volume of oxygen percent. For the optimum resistivity and transparency of the ITO thin film electrode achieved with a 75 W plasma power, 10 % volume of oxygen and a 27 nm/min deposition rate. Above 85 % transparency in the visible wavelength range (300-800 nm) measured without post annealing process and a low resistivity value $9.83{\times}10^{-4}{\Omega}cm$ was measured thickness of 300 nm. All fabrication process of ITO thin films did not exceed $80^{\circ}C$.

• 한국재료학회지
• /
• 제17권4호
• /
• pp.232-235
• /
• 2007

Indium tin oxide (ITO) films were deposited on polycarbonate CR39 substrate using DC magnetron sputtering. ITO thin films were deposited at room temperature because glass-transition temperature of CR39 substrate is $130^{circ}C$ ITO thin films are used as bottom and top electrodes and for organic thin film transparent transistor (OTFT). The electrodes electrical properties of ITO thin films and their optical transparency properties in the visible wavelength range (300-800 nm) strongly depend on the volume of oxygen percent. The optimum resistivity and transparency of ITO thin film electrode was achieved with a 75 W plasma power, 10 % volume of oxygen and a 27 nm/min deposition rate. Above 85% transparency in the visible wavelength range (300-800 nm) was measured without post annealing process, and resistivity as low as $9.83{\times}^{TM}10^{-4}{\Omega}$ cm was measured at thickness of 300 nm.

• 한국염색가공학회지
• /
• 제12권6호
• /
• pp.353-360
• /
• 2000

In this article, arrowroot is extracted in distilled water, and its dyeing properties on wool, nylon, and silk were investigated. Also the effect of mordanting (Al, Cu, Sn, Fe and Cr compounds) on the wash fastness are measured. The wavelength of maximum absorption of the arrowroot extract appears at 250 and 300nm below pH 7, but they shifted to longer wavelength at higher pH values. It appears that the optimum condition of the dyeing of wool, nylon, and silk fabric with arrowroot extract is $60^\circ{C}$, 60 min, and pH 4.0. Mordant treatments are effective in improving wash fastness of polyamide fabrics.

• 한국재료학회지
• /
• 제18권11호
• /
• pp.623-627
• /
• 2008

For possible applications as luminescent materials for white-light emission using UV-LEDs, $Ba_2Mg(PO_4)_2:Eu^{2+}$ phosphors were prepared by a solid state reaction. The photoluminescence properties of the phosphor were investigated under ultraviolet ray (UV) excitation. The prepared phosphor powders were characterized to from a single phase of a monoclinic crystalline structure by a powder X-ray diffraction analysis. In the photoluminescence spectra, the $Ba_2Mg(PO_4)_2:Eu^{2+}$ phosphor showed an intense emission band centered at the 584 nm wavelength due to the f-d transition of the $Eu^{2+}$ activator. The optimum concentration of $Eu^{2+}$ activator in the $Ba_2Mg(PO_4)_2$ host, indicating the maximum emission intensity under the excitation of a 395 nm wavelength, was 5 at%. In addition, it was confirmed that the $Eu^{2+}$ ions are substituted at both $Ba^{2+}$ sites in the $Ba_2Mg(PO_4)_2$ crystal. On the other hand, the critical distance of energy transfer between $Eu^{2+}$ ions in the $Ba_2Mg(PO_4)_2$ host was evaluated to be approximately 19.3 A. With increasing temperature, the emission intensity of the $Ba_2Mg(PO_4)_2$:Eu phosphor was considerably decreased and the central wavelength of the emission peak was shifted toward a short wavelength.