• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.80-86
• /
• 2004

With the increasing demand of environmentally clean machining in recent years, the use of coolants has been restricted extensively. In this paper, a multiple comparison method(Tukey's HSD method) is proposed to choose the optimum level of coolant necessary for an efficient and environmentally clean machining. The cutting temperature, specific cutting energy, and surface roughness in turning process are analysed by ANOVA(Analysis Of Variance) and Tukey's HSD method. From the experimental results and statistical analysis, it is found that the optimum condition of coolant level is 10 ml/min with 6% mix ratio, which is almost half of the commonly used level.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.100-102
• /
• 2009

Effect of temperature, pH and soil depth on germination of Dianthus chinensis, Dianthus barbatus, and Perennial pennant were investigated in growth chamber and soil condition at the ratio of 7:3 (natural soil and organic soil) in laboratory condition. the optimum temperature for seed germination was recorded for $20^{\circ}C-\;25^{\circ}C$. Maximum germination was observed for Dianthus barbatus (76%) where as in soil condition Perennial pennant (51%) showed maximum germination at 1 cm soil depth. Similarly, optimum pH for seed germination was at pH 6 in all the species. So in lower pH (at pH4) seed germination was inhibited. Germination of these selected species at different environmental condition help to construct the ecological sound proof wall to mitigate the noise especially in urban areas.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.74.2-74.2
• /
• 2011

A simulation study on synthesis gas process in GTL process was carried out in order to find optimum operation conditions for GTL (gas-to-liquid) pilot plant design. Optimum operating conditions for synthesis gas process were determined by changing reaction variables such as feed temperature and pressure. During the simulation, overall synthesis process was assumed to proceed under steady-state conditions. It was also assumed that physical properties of reaction medium were governed by RKS (Redlich-Kwong-Soave) equation. The effect of temperature and pressure on synthesis gas process $H_2$/CO ratio were mainly examined. Simulation results were also compared to experimental results to confirm the reliability of simulation model. Simulation results were reasonably well matched with experimental results.

• International Journal of Automotive Technology
• /
• v.1 no.2
• /
• pp.79-87
• /
• 2000

Analytical approach was followed in this work under both the steady state and transient operating conditions to find optimum boundary conditions, where the optically accessible quartz engine can run safely without breaking. Temperature and stress distribution was predicted by FEM analysis. In order to validate thermal boundary condition, model reliability and constraint, outside cylinder temperature was measured and previous study was also followed up numerically. To reduce thermal stress level, three types of outside cooling (natural, moderate forced and intensive forced convection) were considered. Effects of clamping force and combustion pressure were conducted to investigate mechanical stress level. Cylinder thickness, was changed to fine the optimum cylinder thickness. The versatile results achieved from this work can be basic indication, which is capable of causing a sudden quartz cylinder breaking during fired operation.

• Microbiology and Biotechnology Letters
• /
• v.27 no.6
• /
• pp.466-470
• /
• 1999

Protease production and its characteristics were investigated with Mucor racemosus f. racemosus PDA 103 which was isolated from Korean traditional meju. Optimum culture conditions of the strain for the production of the protease in basic medium[bean(Baektae):H2O=1:1(w/v)] were as follows: pH 6, 3$0^{\circ}C$ and 72hrs. Optimum pH and temperature for the enzyme activity of the protease produced by Mucor racemosus f. racemosus were pH 5 and 5$0^{\circ}C$, respectively. The enzyme was relatively stable a pH2.0~5.0 and at temperature below 4$0^{\circ}C$. Phenylmethane-sulfonyl fluoride and Ag+ inhibited the enzyme activity. This indicates that the enzyme is serine protease. Km value was 0.9$\times$10-4M and Vmax value was 5.93$\mu\textrm{g}$/min. This enzyme hydrolyzed casein more rapidly than bovine albumin.

• Journal of Microbiology and Biotechnology
• /
• v.1 no.3
• /
• pp.202-206
• /
• 1991

To produce acetoin as a precursor of the tetramethylpyrazine flavor compound from citrate by Lactococcus lactis ssp. lactis biovar. diacetilactis FC1, fermentation factors such as inital pH of culture media, temperature, concentration of Na-citrate, thiamin-HC1 and sugars were examined. The best acetoin production was achieved with initial pH in the culture media of 5.5, fermentation temperature of $34^{\circ}C$, Na-citrate concentration of 3%, addition of thiamin-HC1 at 2 mg/l and galactose as a carbon source. When fermentation was carried out under the optimum conditions, the exhaustion of Na-citrate and the production of acetoin took simultaneously and acetoin reached the maximum content, 80 mmole/l after 20 hours.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.6
• /
• pp.446-451
• /
• 2008

The growth of Porphyridium cruentum and its porphyran polysaccharide production were measured as functions of light intensity, temperature, light quality (fluorescent, blue, red, and green) and nitrate concentration. The optimum light intensity, temperature, and nitrate concentration for the growth of Porphyridium cruentum and for its polysaccharide production were 1,400 lx, $25^{\circ}C$, and 0.03%, respectively. The maximum cell concentration and polysaccharide content under the optimum conditions were 1.95 and 0.23 mg/mL, respectively. Light quality did not influence growth or polysaccharide production. The best results for growth and polysaccharide production were obtained using fluorescent light.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.4
• /
• pp.431-439
• /
• 1999

A generator-GAX combined rectification system of an ammonia absorption heat pump was investigated to get the optimum design values. The mass and heat transfer phenomena of the rectification system were analysed. The number of column plates, equilibrium temperature of solution on each plate and flow rates of solution and vapor generated were predicted. The characteristics of mass and heat transfer of the generator-GAX combined rectification system, i.e. concentration difference of leaving solution and vapor on each column plate, were found to be mainly governed by the pressure of generator, reflex ratio and temperature difference of analyser coolant. The number of rectification column plates for each different pressure in generator was obtained. The optimum locations for installing the feeder from solution-cooled absorber and GAX desorber in generator were predicted. The improvement of COP was followed by the increase of the rectifier efficiency and the number of column plate, and the decrease of reflex ratio.

• Korean Journal of Microbiology
• /
• v.25 no.2
• /
• pp.148-156
• /
• 1987

Extracellular laccase (E.C. 1.10.3.2) from the culture filtrate of Pleurotus ostreatus was purified by ammonium sulfate precipctation, protamine sulfate precipitation, DEAE-Sephadex A-50 ion exchange chromatography and Sephadex G-100 gel permeation chromatography. The molecular weight of the enzyme was estimated by SDS-polyacrylamide gel electrophoresis to be 58,000 and the isoelectric point was 3.75. The optimum temperature for the enzyme was about $45^{\circ}C$ and the optimum pH was 6.5. The enzyme was found to be stable at temperature below $35^{\circ}C$ and rapidly inactivated at higher temperatures. Km values for ferulic acid, vanillic acid, dihydroxyphenylalanine (DOPA) were 48.6.$\mu$M, 0.52mM, and 2.73mM, respectively, which indicates that the enzyme has much higher affinity towards ferulic acid. The reaction products of the enzyme were separated by TLC and HPLC.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1998.06a
• /
• pp.173-176
• /
• 1998

Epitaxial Si layers were deposited on n- or p-type Si(100) substrates by hot-wall chemical vapor deposition (CVD) technique using the {{{{ {SiH }_{ 2} {Cl }_{2 } - {H }_{ 2} }}}}chemistry. Thermodynamic calculations if the Si-H-Cl system were carried out to predict the window of actual Si deposition procedd and to investigate the effects of process variables(i.e., the deposition temperature, the reactor pressure, and the source gas molar ratios) on the growth of epitaxial layers. The calculated optimum process conditions were applied to the actual growth runs, and the results were in good agreement with the calculation. The expermentally determined optimum process conditions were found to be the deposition temperature between 900 and 9$25^{\circ}C$, the reactor pressure between 2 and 5 Torr, and source gad molar ration({{{{ {H }_{2 }/ {SiH }_{ 2} {Cl }_{2 } }}}}) between 30 and 70, achieving high-quality epitaxial layers.