• KSBB Journal
• /
• v.5 no.4
• /
• pp.355-363
• /
• 1990

Methanol-utilizing bacterium isolated from sewage samples in Seoul showed optimal temperature and pH of $33^{\circ}C$ and 7.1 for growth, respectively. The maximum specific growth rate was $0.42hr^{-1}$. The minimum medium composition was reconstituted depending on the surplus and the deficit of each component in the basal medium at steady state. The optimal composition was given as(g/l); Methanol 40, $(NH_4)_2\;SO_42, \;KH_2PO_4\;1.5, \;K_2HPO_4\;0.2, \;H_3PO_4\;0.79, \;Na_2HPO_4{\cdot}12H_2O\;0.15, \;MgSO_4{\cdot}7H_2O\;1.5, \;FeSO_4{\cdot}7H_2O\;0.034, \;MnSO_4{\cdot}4H_2O\;0.005, \;CuSO_4{\cdot}5H_2O\;0.0027, \;CaCl_2{\cdot}2H_2O\;0.25, \;ZnSO_4{\cdot}7H_2O\;0.007, \;(NH_4)_6\;Mo_7O_{24}{\cdot}4H_2O\;0.00048, \;H_3BO_3\;0.00068, \;CoCl_2\; 0.00024$ Under the continuous culture with optimum medium the maximum cell productivity was 3.8g/1/hr at dilution rate $0.23hr^{-1}$. Maximum cell concentration and its protein content were 19.5g/l and 70% at dilution rate of $0.1hr^{-1}$, respectively.

• Journal of the Korean Ceramic Society
• /
• v.39 no.7
• /
• pp.649-656
• /
• 2002

In situ patterned zinc oxide thin films were prepared by precipitation of Zn(NO$_3$)$_2$ aqueous solution containing urea and by microcontact printing using Self-Assembled Monolayers(SAMs) on A1/SiO$_2$/Si substrates. The visible precipitation of Zn(OH)$_2$ that was formed in the Zn(NO$_3$)$_2$ aqueous solution containing urea was enhanced with an increase of the reaction temperature and the amount of urea. As the reaction time of Zn(NO$_3$)$_2$ with urea was prolonged, the thickness and grain size of Zn(OH)$_2$ thin layers were increased, respectively. The optimum precipitation condition was at 80$\^{C}$ for 1 h for the solution with the ratio of Zn(NO$_3$)$_2$ to urea of 1 : 8. Homogeneous ZnO thin films were fabricated by the heat treatment of 600$\^{C}$ for 1 h of Zn(OH)$_2$ precipitation on Al/SiO$_2$/Si substrate. This was available to the in-situ patterned ZnO thin films with uniform grain size. Hydrophobic SAM, Octadecylphosphonic Acid(OPA) and hydrophilic SAM, 2-Carboxyethylphosphonic Acid(CPA) were applied on the Al/SiO$_2$/Si substrate by microcontact printing method. In situ patterned ZnO thin film was successfully prepared by the heat treatment of Zn(OH)$_2$ precipitated on the surface of hydrophilic SAM, CPA.

• Membrane Journal
• /
• v.5 no.4
• /
• pp.137-144
• /
• 1995

This studies concern the separation of aqueous boric acid solution and same solution containing silica using cellulose acetate RO S/W 4040 module manufactured by Hydranautics Co. The operating conditions of the applied pressures, temperatures, and feed flow rate are also investigated to characterize the permeabilities, biroc acid recovery, and silica rejection, so that the optimum operating conditions would be found out. In the case where the operating conditions are the temperature 35$^{\circ}$C, The pressure 20atm, and the feed flow rate 2.82 l/min, for the boric acid aqueous solution, the boric acid recovery 58.7% and the permeation rate 2.82 l/min were obtained. And also the results showed the boric acid recovery 68.1% and the permeation rate 1.56 l/min at the operating conditions, 35$^{\circ}$C and 10atm. For the boric acid solution containing silica, when the feed solution are at the conditions of 35$^{\circ}$C and 3.2atm, the boric acid recovery 69.7%, the silica rejection 97.5% and the permeation rate 0.47 l/min were obtained. And the operating conditions were at 35$^{\circ}$C, 20atm and the feed flow rate 2.92 l/min, the results showed the boric acid recovery 56.4%, the silica rejection 96.1% and the permeation rate 2.72 l/min.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.4
• /
• pp.85-93
• /
• 2011

A parametric study is conducted for the design of segmented arc plasma torch with the input power and current of 0.4 MW and 300 A, respectively. For this purpose, we use the analytical relationship between input power, current condition, plasma temperature, inner diameter (R) and length (L) of the torch constrictor based on arc channel model. The results reveal that arc plasma temperatures increase monotonically as ��L increases or R decreases for the ranges of R ${\leq}$ 7.5 mm and L ${\leq}$ 1.25 m. For larger valuse of ��R and L than 7.5 mm and 1.25 m, respectively, however, they show non-linear behavior corresponding to the variations of ��L, which stands for the generation of unstable arc plasma. From this parametric study, optimum ranges of R and L are suggested as 5.5 mm ${\leq}$ R ${\leq}$ 7.5 mm and 0.25 m ${\leq}$ L ${\leq}$ 0.5 m for 0.4 MW class segmented arc plasma torch, under which stable arc plasma can be achieved at the input currents of ~300 A.

• The Korean Journal of Mycology
• /
• v.37 no.1
• /
• pp.117-119
• /
• 2009

Rhizopus soft rot caused by Rhizopus stolonifer occurred on strawberry (Fragaria ${\times}$ ananassa) in the plastic boxes in Jinju City Wholesale Market of Agricultural Products at Gyeongnam province in Korea on April 2008. The infected fruits were rapidly softened, water soaked and finally rotted. The symptoms were mainly occurred through wounds at harvest time. The colony color was white, cottony to brownish black after fully matured and numerous sporangiospores were formed on sporangia. The optimum growth temperature of the fungus was $30^{\circ}C$ on potato dextrose agar. Sporangia were globose or hemispheric shape of white color at initial stage and gradually changed with black color of $82{\sim}195{\mu}m$ in size. Sporangiophores were $12{\sim}25{\mu}m$ in width. Columella were hemispheric in shape, and $70{\sim}92{\mu}m$ in size. Sporangiospores were irregular round or oval in shape, brownish-black in color and $9{\sim}21\;{\times}\;7{\sim}8{\mu}m$ in size. This fungus formed stolones and rhizoid on PDA. On the basis of symptom, mycological characteristics and pathogenicity of the fungus, the causal fungus was identified as Rhizopus stolonifer (Ehrenb.) Vuill.

• Elastomers and Composites
• /
• v.42 no.4
• /
• pp.249-258
• /
• 2007

In this study, the EPDM powder which was surface activated by high temperature and shear pulverization process was prepared and the mechanical properties and odor material analysis were investigated. Analysis for particle size and size distribution of waste of the EPDM powder has been performed. The waste EPDMs used in this study were 4 types of solid, sponge, solid+sponge, and solid+metal. According to the results, the solid type showed the smallest particle size among the 4 types of EPDM powder. Effective surface devulcanization of EPDM powder could be obtained by the addition of the reclaiming agent. The dicumyl peroxide was considered as the best crosslink agent for dynamic vulcanization when the surface activated EPDM powder was blended with polyolefin in order to make TPE. Also, the optimum amounts of DCP was 6 phr in terms of surface crosslink reaction and mechanical properties of EPDM powder. The processes of water adsorption and rose oil addition were employed to remove the odor of EPDM powder caused by reclaiming agent. The GC/MS was used to analyze the odor compounds.

• Korean Journal of Plant Resources
• /
• v.24 no.1
• /
• pp.69-75
• /
• 2011

This study was conducted to investigate the variation of cone, seed and germination characteristics among populations and among individuals within populations of Picea jezoensis(Siebold & Zuccarini) Carriere distributed in Korea. Cone collected from 25 trees in two natural populations(Mt. Jiri and Mt. Dokyu) and their thirteen cone and seed characteristics as well as three germination behaviors were analyzed. Statistical analysis showed significant differences among populations and among individuals within populations in 9 traits except for seed breadth, seed weight, index of seed wing and mean germination time. Generally, morphological variation of cone and seed wings from Mt. Jiri population has smaller and longer than those of Mt. Dokyu population. Percentage of sound seeds and Tetrazolium test from Mt. Jiri population showed 1.79 and 1.87 higher values than Mt. Dokyu population, respectively. The maximum germination percentage was obtained at the optimum temperature of $20^{\circ}C$ and in this case, mean germination time and germination rate showed 7.5 days and 2.9 ea./day, respectively. In seed germination behaviors, percentage(40.7%) and rate(0.90 ea./day) of germination in Mt. Jiri population were more higher and faster than those of Mt. Dokyu population(17.7%, 0.37 ea./day). According to correlation analysis, P. jezoensis populations with small restricted distribution may have been reduced because seed qualities were correlated with increased levels of inbreeding and disproportion flowering.

• Clean Technology
• /
• v.11 no.4
• /
• pp.195-204
• /
• 2005

A new condensation process for manufacturing N-acyl taurates which generates less pollutant and produces more than 60 % yield in comparison with the conventional process has been developed in this work. Its optimum process conditions are at $210{\sim}230^{\circ}C$ of reaction temperature and 6 ~ 9 hour of reaction time when Parasol 123 of petroleum refired oil is employed as process solvent and mixed catalysts of sulfonic acid and phosphoric acid are utilized as process catalyst. And the qualities of N-acyl taurates produced by this new process are similar to or better than those of imported product judging from their acid value, amine value and color. Thus, it can be said that the newly developed process for manufacturing N-acyl taurates in this work is better than the conventional process. The physical properties of N-acyl taurates produced in this work such as surface tension, foaming power, foaming stability, hard water stability, and emulsifying power etc. were compared with those of commercially available anionic surfactants. And the experimental results show that N-acyl taurates shows good physical properties and that they can be alternative to conventional anionic surfactants.

• The Korean Journal of Mycology
• /
• v.31 no.1
• /
• pp.40-43
• /
• 2003

Symptoms similar to anthracnose were observed on Amaranthus mangostanus in Sancheon-gun, Gyeongnam province, where the plants were autogenously formed community. The symptoms were appeared in stem and spread, eventually whole plants died. Mycelial colony of the isolate was whitish gray to dark gray on potato dextrose agar. Conidia were single celled, colorless, cylindrical and measured as $10.5{\sim}21.7{\times}3.8{\sim}6.0{\mu}m$. Appressoria were dark brown, ovate to obovate and sized as $5.6{\sim}13.7{\times}4.6{\sim}11.4{\mu}m$. Perithecia were brown to black in color and shaped as globose to obpyriform and sized as $79.7{\sim}286.7{\mu}m$. Asci had eight ascospores and sized as $47.7{\sim}89.7{\times}8.1{\sim}13.3{\mu}m$. Ascospores were slightly curved at the center cylindrical, fusiform and measured $9.3{\sim}20.3{\times}4.6{\sim}6.3{\mu}m$. Optimum temperature for growth was $30^{\circ}C$. On the basis of morphological characteristics and pathogenicity test to host plants, the fungus was identified as Glomerella cingulata. This is the first report on the Anthracnose of Amaranthus mangostanus caused by Glomerella cingulata in Korea.

• Journal of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.367-375
• /
• 1981

Single crystals of Potassium Sulfate ($K_2SO_4$) have been grown from the saturated solution by the evaporation method at the optimum conditions. Radiation damages in the crystal by ${\gamma}$-irradiation of about $12{\times}10^6$ Roentgen have given rise to paramagnetic centers or paramagnetic defects. Electron spin resonance (ESR) spectra of the centers are obtained with the X-band EPR spectrometer at room temperature. The ESR peaks of the paramagnetic species are found to be anisotropic but the peak of $SO_3-$ radical is an isotropic of Gaussian shape at g = 2.0036. A number of ESR spectra of the crystal for angular variation of the anisotropic peaks are recorded at various orientations of rotation about a, b and c crystallographic axes respectively. The g-values are calculated from the line position between anisotropic peaks and the isotropic one and then principal g-values and its direction cosines of the species are obtained by diagonalization of 9 matrix elements of the corresponding g-values. All the paramagnetic defects are identified by the characteristic principal g-values and its direction cosines.