• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.97-104
• /
• 1987

An analysis on the thermodynamic optimum use of thermal water has been accomplished. The systems investigated are power generation and space heating. The space heating systems considered in this study are direct heating, heat pumps and heat pump assisted heating. The object of this study is to find the optimum selection and operation of the system under the given resources. The measure of such optimum conditions is the EFFECTIVENESS, the concept of efficiency based upon the Second Law of Thermodynamics. The temperature of water to waste is identified as the most important parameter to be optimized. The analysis indicates that for high temperature resources (higher than about 425K) power generation yields the best performance and is therefore recommended. The heat pumps are recommended for the resource temperature less than about 327K. The heat pump assisted heating system shows its superiority for the very narrow temperature range (320K-330K) and thus the use of this system should be considered when the flow rate is very limited. thus the direct heating is appropriate for the temperature range of 330K-425K. The analysis also shows the optimum capacity of thermal water, which may be useful for the initial estimation of heating or power generation potentials of given resources.

• Journal of the Korea Concrete Institute
• /
• v.20 no.5
• /
• pp.627-634
• /
• 2008

This paper presents an optimum mixture design method for proportioning a concrete. In the proposed method, the search space is constrained as the domain defined by the minimal convex region of a database, instead of the available range of each component and the ratio composed of several components. The model for defining the search space which is expressed by the effective region is proposed. The effective region model evaluates whether a mix-proportion is effective on processing for optimization, yielding highly reliable results. Three concepts are adopted to realize the proposed methodology: A genetic algorithm for the optimization; an artificial neural network for predicting material properties; and a convex hull for evaluating the effective region. And then, it was applied to an optimization problem wherein the minimum cost should be obtained under a given strength requirement. Experimental test results show that the mix-proportion obtained from the proposed methodology using convex hulls is found to be more accurate and feasible than that obtained from a general optimum technique that does not consider this aspect.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.2
• /
• pp.129-139
• /
• 2006

When blasting by imposing the time difference between two adjacent charge holes, the mutual interference phenomenon occurs depending the feature of blast. This interference phenomenon of blast amplifies or compensates the blast-induced vibration depending on the overlapping mechanism. Thus, this experiment aims at finding out the optimum delay time by measuring the blast vibration data from the single hole blast during the blasting test and composing each blasting waveform, and at proving the its efficiency by applying the composition delay time in the entire cross section. The experiment showed that the blasting-induced vibration was reduced by endowing an optimum delay time of electronic detonator appropriate to the rock quality of construction site compared to the typical delay time (20, 25ms) of existing detonator (non-electric and electric detonator). From these results, the excavation efficiency using blasting could be enhanced..

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.434-442
• /
• 2016

Jansen mechanism is composed of mechanical walking linkages that are designed and optimized by Theo Jansen in 1990. Although he has made optimum values for linkage dimensions for Jansen Mechanism, there are still various applications for this mechanism and also various optimum values for each application. In this paper, Jansen Mechanism optimization has been processed for the Science Box. The Science Box has its own linkage dimensions and related components and makes space for optimization process. For the optimization 3 to 4 linkage were selected which had no similar ratios of linkages between other applied Jansen mechanisms and to reduce experiment numbers. Response Surface Method was used with Minitab 17 for optimization and m.sketch was used for experimentation. Intuitive method had to be used to find optimum values as with RSM optimum value could not be found. EDISON Designer was used to make final CAD model with optimum values and laser cutter was used to get appropriate acryl panels for legs.

• Proceedings of the ESK Conference
• /
• 1998.04a
• /
• pp.161-166
• /
• 1998

In this study, the optimum criteria of space between the lines and the letters which could largely affect the legibility were found by the experiment and were presented as guidelines to design Korean VDT screens. Since the experiment was designed to test the human performance based on the VDT screen design, searching speed (S.S) and error rate (E) were used as the criteria of performance, and CFF value was measured to evaluate user's visual fatigue. The EOG value was also measured for the visual restriction during the experiment for the space between the lines and letters.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.664-667
• /
• 1995

The purpose of this paper is to consider the disk failure phenomenon based on the second kind Fredholm integral equation and numerical inversion of Laplace transform when the head hit disk asperities at HDI under antiplane impact loading. The model for analysis is a two layeered half-space with a circumferential surface edge crack. The optimum design parameters to reduce the disk failure due to impact are presented

• International Journal of Aeronautical and Space Sciences
• /
• v.4 no.2
• /
• pp.88-94
• /
• 2003

This paper describes the design of the Ka-band Antenna/RF system, which was developed for the experiment of the high-speed satellite communications with geostationary satellite. The design issues described here are the ka-band characteristics for having an optimum performance. and the system characteristic for having a reliable and an extensional operation.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.38-38
• /
• 2004

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.838-839
• /
• 2013

In this paper, optimum beamforming method using spherical microphone array is presented. Beamforming method has been recognized as an important study in localizing sound sources or visualizing acoustic fields in three-dimensional space. Its geometrical arrangement of sensors in space enables to process array signal to analyze the fields of interest by steering array response in three-dimensional.

• Journal of Families and Better Life
• /
• v.28 no.3
• /
• pp.179-187
• /
• 2010

Since the late 20th century, construction companies have developed different brands of apartments while keeping the LOHAS, well-being, ubiquitous, and one-stop-living concepts in mind. From this point of view, this study intends to define the diverse space planning needs of apartment residents. The purpose of this study is to suggest optimum guidelines regarding the subject of space requirements and planning by conducting in-depth interviews of residents whose apartment floor size is between $66m^2$ (20 Pyong) and $165m^2$ (50 Pyong) and whose apartment is less than 5 years old. The major findings were as follows: (1) The shortage of storage space in different types of apartment housing units was found to be a chronic problem. Thus, closet sizes mustbe increased. (2) The size of the master bedroom needs to be decreased, whereas the size of the kitchen and dining room as well as the size of the second and/or third bedroom must be increased. More space is required in common areas occupied by the family and larger closets are needed. Less space is required for the master bedroom.