• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.412-419
• /
• 2009

Large quantity of extra soils discharged from excavation site in Songdo area can be treated by hardening agents and utilized in surface stabilized layer overlying thick reclaimed soft soil deposit. Though surface layer stabilization method using cement or lime for very soft soils has been studied in recent years, but studies on moderately soft clayey silt has not been tried. The purpose of this research is to investigate optimum mixing condition for stabilizing Songdo marine soil with low plasiticity. The optimum mixing conditions of hardening agents with Songdo soil such as kind of agents, mixing ratio, initial water content and curing time are investigated by uniaxial compression test and laboratory vane test. The results indicate that strength increases with high mixing ratio and long curing time, while decreases drastically under certain water content before mixing. Finally, optimum mixing condition considering economic efficiency and workability with test results was proposed.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.6
• /
• pp.216-226
• /
• 2007

The efficient vertical lift planning has been brought into relief in high-rise building construction projects. Particularly, the selection and stability examination of the tower cranes is the most important elements in vertical lift planning. Therefore, professional knowledge is needed to full fill the site condition for the plan. However, there are short of the number of specialists and information about tower cranes. This study proposes a system for the selection of the optimum tower cranes (Opt-TC) in high-rise building construction projects. The Opt-TC can give the selection and stability examination of tower cranes at once in real-time.

• Proceedings of the KAIS Fall Conference
• /
• 2006.05a
• /
• pp.608-610
• /
• 2006

Supply Chain Management(SCM) system is a critical investment that can affect future competitiveness and performance of a company. When adopting a new SCM system, organizations experience increasing difficulty in decision making because information technology is changing so rapidly these days. Therefore, organizations have been looking for industry standards and proven methods of selection that they can utilize to choose the best SCM system. To select an optimum solution, we need to consider a number of different quantitative and qualitative factors such as cost, user interface and convenience, reference site, and so on. In this study, we propose a solution selection model of SCM systems using Fuzzy AHP to maximize the return on investment in information technology. The proposed model can systematically construct the objectives of SCM system selection to support the business goals.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.4
• /
• pp.331-339
• /
• 2016

According to high-rise, complexation, and enlargement of buildings, various construction methods are being developed, and the significance of construction method selection about main work types has emerged as a major interest. However, it has been pointed out that hand-on workers cannot consider project characteristics carefully, and they lack an objective standard or reference for main construction method selection. Hence, the selection is being made depending on hand-on workers' experience and intuition. To solve this problem, various studies have proceeded for construction method selection of main work types using Artificial Intelligence like Fuzzy, AHP and Case-based reasoning. It is difficult to apply many different kinds of construction method selection to every main work type with consideration for characteristics of work types and condition of a construction site when selecting construction method in the field. Accordingly, this study proposed the decision-making model which can apply to fields easily. Using matrix analysis and liner transformation, this study verified consistency of study models applied in the process of soil retaining selection with a case study.

• The Journal of the Korea Contents Association
• /
• v.13 no.11
• /
• pp.415-422
• /
• 2013

The contents development for the Internet and cyber tour has been attempted in a number of areas. 3D topography of the spatial environment, land planning and land information contents as a 3D tour of the future ubiquitous city safe for tourism due to the implementation of information made available major area. Domestic service, and in urban areas of the country where land and precise spatial information in order to shoot satellites and aircraft in the area you want to mount the camera on a variety of photo images taken by conducting 3D spatial that is required is able to obtain the information. Geo spatial information in a variety of direct or indirect acquisition of the initial spatial data into a database for accurate collection, storage, editing, manipulation and application technology changes in the future by establishing a database of 3D spatial by securing content organization ubiquitous tourist to take advantage of new tourism industry was greatly. As a result of this study for future tourism using geo spatial information and analysis of 3D modeling by intelligent land information indirectly, with quite a few stereo site experience and a variety of tourist spatial acquisition and utilization of information could prove.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.9
• /
• pp.905-910
• /
• 2006

This research is conducted to calculate optimum residents grant regarding types of environmental foundational facilities. In the case of Gangwon province, it was particularly referred in this study, the residents grant of waste treatment facilities was excessively discharged as $1.6{\sim}75.0%$ of construction cost. This kind of excessive residents grant has overweighted the local governments' financial conditions. Accordingly, it is necessary to increase the amount of charge on the national treasury. In the calculation method of optimum residents grant reasonable resident support fund of waste treatment facilities was computed the range of 20%, food waste treatment facilities was 10% ranges and sewage and night soil combination treatment facilities was $3{\sim}5%$ ranges.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.5
• /
• pp.511-518
• /
• 2019

Evaluating the habitat suitability of potential aquaculture sites for cultured species is critical to the sustainable use of tidal flats. This study evaluated the habitat suitability index (HSI) of 12 sites in a tidal flat aquaculture farm at Geunso Bay, Taean, in June 2016. The parameters used to model the suitability index were Growth (water temperature, chlorophyll ${\alpha}$, hydrodynamics), Survival (sediment-sand, mean size, air exposure), and Environment (DO, salinity). The HSI was calculated using weighted and No weighted geometric means. The results showed high habitat suitability at the bay's entrance (HIS; No weighted, 0.60-0.70; weighted, 0.60). Hydrodynamics, air exposure, sediment-sand and mean size are thought to have a significant impact on habitat selection by Manila clams Ruditapes philippinarum. This study explored the optimum habitat for Manila clams by calculating the HSI, providing basic data for tidal flat management.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.8 no.1
• /
• pp.127-137
• /
• 2002

This paper deals with developing a Web-based Solver NRO(Network Reliability Optimizer) for solving three classes of reliability redundancy optimization problems which are generated in series systems. parallel systems and complex systems. Inputs of NRO consisted in four parts. that is, user authentication. system selection. input data and confirmation. After processing of inputs through internet, NRO provides conveniently the optimal solutions for the given problems on the Web-site. To alleviate the risks of being trapped in a local optimum, HH(Hybrid-Heuristic) algorithm is incorporated in NRO for solving the given three classes of problems, and moderately combined GA(Genetic Algorithm) with the modified SA(Simulated Annealing) algorithm.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.933-935
• /
• 2003

Geo-scientifically viable, environmentally suitable, and socially acceptable sanitary landfill sites are very limited in the Kathmandu Valley and is confronted with the burning problem of safe disposal of urban waste. This paper deal with the evaluation and assessment of its interface, following the major criteria defining suitable geological barrier, Cation Exchange Capacity and other necessary physical parameters with the optimum utilization of remotely sense data along with GIS techniques. The study revealed one of the most viable sites at the flat land of natural depression of Taikabu area and has potential to serve all the municipalities of the Kathmandu Valley.

• Journal of Korea Water Resources Association
• /
• v.50 no.3
• /
• pp.191-200
• /
• 2017

A robust parameter set (ROPS) selection framework for an unsteady flow model was developed by combining Pareto optimums obtained by outcomes of model calibration using multi-site observations with the minimax regret approach (MRA). The multi-site calibration problem which is a multi-objective problem was solved by using an aggregation approach which aggregates the weighted criteria related to different sites into one measure, and then performs a large number of individual optimization runs with different weight combinations to obtain Pareto solutions. Roughness parameter structure which can describe the variation of Manning's n with discharges and sub-reaches was proposed and the related coefficients were optimized as model parameters. By applying the MRA which is a decision criterion, the Pareto solutions were ranked based on the obtained regrets related to each Pareto solution, and the top-rated one due to the lowest aggregated regrets of both calibration and validation was determined as the only ROPS. It was found that the determination of variable roughness and the corresponding standardized RMSEs at the two gauging stations varies considerably depending on the combinations of weights on the two sites. This method can provide the robust parameter set for the multi-site calibration problems in hydrologic and hydraulic models.